VPforce Controls•3y ago

Is the "92" supposed to appear when I click the box and push the button in my grip?

LeLv30_SuperbusOP•4/7/23, 5:55 PM

I just found this

LLeLv30_Superbus I just found this 👇

PiNKSH!T•4/7/23, 5:56 PM

hey m8, looks like your onto it

LLeLv30_Superbus Is the "92" supposed to appear when I click the box and push the button in my gr...

PiNKSH!T•4/7/23, 5:56 PM

looks like the consecutive numbers for a HAT swich

LLeLv30_Superbus Is the "92" supposed to appear when I click the box and push the button in my gr...

PiNKSH!T•4/7/23, 5:58 PM

also you might need to check the 'Override Trim' box too, what sim you playing?

LeLv30_SuperbusOP•4/7/23, 6:28 PM

All good I just started up in a Huey and flipped that old "force trim" toggle switch I've always had in my pit but for the first time the stick came alive when I did!

And both trim and trim reset now ~~change the centre point~~ as (I imagine) they'd do in a real one.

LeLv30_SuperbusOP•4/7/23, 7:51 PM

Yeah I had to come back to correct something... what happens now when I hit trim: the stick DOESN*T move. The centering force just disappears. And it's amazing.

SundogZeus•4/7/23, 8:05 PM

Does anyone notice how far the F-14 default stick position is in DCS? I read that this is a function of the stick curvature of the real airplane that they modeled. I love all the other FFB features of this module, but I need to somehow make an adjustment for the Rhino default position. Any tips? Thanks

Hextopia•4/7/23, 8:12 PM

You can change the endstops of the axis so they bias forward if it bothers you

Hextopia•4/7/23, 8:13 PM

It's not a function of stick curvature, but rather a function of how the stick in a real aircraft works, with the stick "center" not actually being in the physical center of the pitch axis

Hextopia•4/7/23, 8:13 PM

Since you don't need the same authority on pitch down as you do for pitch up

LeLv30_SuperbusOP•4/7/23, 8:51 PM

I ran TelemFFB while trying the Huey. Am I correct that Huey doesn't have any translational lift effects yet? Can I just add my own lines to config.ini under these and try?
[UH-1H]
type=Helicopter

LLeLv30_Superbus I ran TelemFFB while trying the Huey. Am I correct that Huey doesn't have any tr...

leninjahd•4/7/23, 8:58 PM

Yea you can

HHextopia It's not a function of stick curvature, but rather a function of how the stick i...

SundogZeus•4/7/23, 10:01 PM

Thank you. Great explanation. I’ll experiment with the forward pitch stop.

Wwalmis What values do you get in the telem windows? Can you screenshot it?

Magpie•4/8/23, 5:25 AM

Any of this help?

harry•4/8/23, 9:08 AM

Hi, I'm trying to get to work the rudder motor. The Rhino joystick is working fine. But I can't get the third motor to deliver some values. I startet the configuration twice and selected different id's, so one is for the joystick and one for the rudder motor. For the rudder motor i get values for cycle time, pot_1,pot_2, curr_x and temp_x. Curr_x is changing if I spin the motor axis but x and y deliver no values even when calibrating. The usb product Id is the same in both instances of the configuration. Any ideas what I could try?

Hharry Hi, I'm trying to get to work the rudder motor. The Rhino joystick is working fi...

walmis•4/8/23, 9:09 AM

You might need to to disable the inactive axis

walmis•4/8/23, 9:09 AM

If your motor is on X, you need to check "disable Y" checkbox

harry•4/8/23, 9:11 AM

Thank you that helped

harry•4/8/23, 9:12 AM

Both appear as rhino ffb joystick in Windows. Is it easy to change the name or should I let them like this?

walmis•4/8/23, 9:13 AM

Just change the product id and name

harry•4/8/23, 9:32 AM

Thank you for your lightning fast support!

harry•4/8/23, 12:10 PM

harry•4/8/23, 12:11 PM

What does it mean when those values are red?

walmis•4/8/23, 12:28 PM

Motor physical center is off center.
To fix this you can

Remove the belt
Enter min 0, max 4096
apply config.
Enable spring, so motor recenters
Center your pedals
Put on the belt
Recalibrate

harry•4/8/23, 12:40 PM

Thank you, will try tomorrow

Fer•4/8/23, 4:38 PM

Hello i have two questions, I don’t know if some one has tried the jf-17 DCS native force feedback it’s really great, the stick vibrates progressively as AoA increases, can this be done with the telemetry software with any other airplane, and can trim feature be implemented in harrier with this software ??

Magpie•4/9/23, 12:27 AM

Yeah it can be done with the telemetry software in the harrier

Magpie•4/9/23, 12:28 AM

I use like .05 buffering to give it a light burble

Fer•4/9/23, 1:08 AM

Ok the trim can be done with the harrier but the vibration gets stronger with more AoA can be done too ??

Magpie•4/9/23, 1:20 AM

Yes

Fer•4/9/23, 2:24 AM

MMagpie Yeah it can be done with the telemetry software in the harrier

Virus•4/9/23, 9:33 PM

How ?

VVirus How ?

Fer•4/9/23, 11:18 PM

Good point

Magpie•4/10/23, 2:09 AM

Umm so the buffet in the config file is the start of the ramp so I put that at like 11 (when the canopy starts shaking)
And the stall is the end of the ramp (maybe like 16)
And the buffet amount is how much you want to feel
Which I put at .05 because it’s got hydraulic controls

Magpie•4/10/23, 2:09 AM

You kinda just make up what feels good

Magpie•4/10/23, 2:09 AM

It doesn’t take into account variable flaps though (changing the stall aoa)

Fer•4/10/23, 2:29 AM

But the buffer increases with AoA.?

Fer•4/10/23, 2:31 AM

and how does the harrier trim can be written ??

BikerSid•4/10/23, 12:37 PM

I'll be starting the design work for my stick soon, as the lathe and mill should be operational in a few weeks.
My first question is the reduction ratio of the pulleys, what is going to work best ?

LeLv30_SuperbusOP•4/10/23, 2:28 PM

As a side note I seem to have become a better virtual pilot since my last flightsim gear purchase

LeLv30_SuperbusOP•4/10/23, 2:29 PM

I posted my UH-1H TelemFFB settings in the knowledge base. I'll do Mi-8 next.

Vulcan•4/10/23, 5:58 PM

After installing a throw limiter (10.5 y axis, 8.4 X axis) I was able to use force comp to resolve the Y axis (value 215) not reaching full but the X axis cant reach full deflection even with the max force comp of 255

LLeLv30_Superbus 🚁 I posted my UH-1H TelemFFB settings in the knowledge base. I'll do Mi-8 next...

ddrake1984•4/11/23, 2:53 AM

could you provide some comment lines so we know what they all mean?

VVulcan After installing a throw limiter (10.5 y axis, 8.4 X axis) I was able to use for...

walmis•4/11/23, 6:36 AM

Thanks for the feedback, indeed there's an issue when axis is scaled. I'll take a look at the maths

Rrecoilfx So I just got my Rhino kit running. Still a newb when it comes to the software. ...

walmis•4/11/23, 11:12 AM

Hey, forgot that you can scale down X axis spring globally using the spring curve/mapping feature

Jaeger•4/11/23, 12:35 PM

The TelemFFB "database" seems to get bigger every day, which is nice. I tied the UH-1 / AH-64 which I think is nice. For me there is one question, is it possible to incorporate a base "shaking", like a background noice? Maybe that can be somehow got of the main rotor whirl as simshaker for aviators does?

Jon (Bounty_V)•4/11/23, 1:18 PM

Does the AH-64 TelemFFB have effects for the main cannon below your feet firing?

JJaeger The TelemFFB "database" seems to get bigger every day, which is nice. I tied the...

walmis•4/11/23, 1:25 PM

Yeah it's possible

JJon (Bounty_V)Does the AH-64 TelemFFB have effects for the main cannon below your feet firing?

walmis•4/11/23, 1:26 PM

Yep, cannon/weapon fire effects are implemented

Jon (Bounty_V)•4/11/23, 1:26 PM

That's nifty

Is the "92" supposed to appear when I click the box and push the button in my grip?

Similar Threads