If I read correctly what W wrote: once he releases next TelemFFB version you will specify in its con

If I read correctly what W wrote: once he releases next TelemFFB version you will specify in its config.ini file which aircraft you want to use it for. All the other modules are unaffected and you'll never have to touch the file again. It's probably just a line of plain text like override_DCS_input = YES (not the actual line) which you add under [AV-8B]. If you need the same for any other module, you just add the same line under [the other a/c handle].

LLeLv30_Superbus If I read correctly what W wrote: once he releases next TelemFFB version you wil...

walmis•4/18/23, 3:55 PM

It's a bit more involved. We need to also find the arguments for the stick position and export them with the telemetry packet for each aircraft separately in the LUA file as StickX and StickY (pedals will be added too in the future)

Wwalmis What do you mean? It should work on any aircraft including the upcoming F-15, if...

zbyte•4/18/23, 6:06 PM

So the Rhino trim is proxied to DCS. Very very cool.

Jon (Bounty_V)•4/18/23, 7:03 PM

https://www.reddit.com/r/ValveIndex/comments/12pxkdv/the_facepalm_macro_keyboard/ new way to salute when catapulting off carriers if you have an index

r/ValveIndex - The Facepalm (macro keyboard)

378 votes and 45 comments so far on Reddit

VVPforceBot Hey @warwolf09, So the last Shipped RHINO is **#0077** on **2023-04-11** Average...

TC-Durham•4/19/23, 3:55 AM

Mine:

TC-Durham•4/19/23, 3:56 AM

Yet to set it up - waiting for dualock to arrive tomorrow - powered up and connected and all seems to work as advertised in the manual.

legobirds•4/19/23, 5:03 AM

This is awesome

Original message was deleted

PiNKSH!T•4/19/23, 5:09 AM

Nah that looks like the Virpil Russian grip, basically the same as the VKB version

PiNKSH!T•4/19/23, 5:10 AM

PiNKSH!T•4/19/23, 5:10 AM

PiNKSH!T•4/19/23, 5:11 AM

plus the Rhino's gimbal/grip connection is another ~130mm

PiNKSH!T•4/19/23, 5:13 AM

So it's about 565mm from the top of the Rhino base to the top of the grip

ddrake1984•4/19/23, 5:23 AM

yes, this is mongoose stick looks like CM2

TC-Durham•4/19/23, 7:10 AM

Yes the new Virpil CM2 withe their 200mm extension.

TC-Durham•4/19/23, 7:12 AM

I will measure tomorrow - 70cm from floor to top of stick

peachmonkey•4/19/23, 3:18 PM

I run a similar configuration with Virpil:
Rhino+10cm extension + 20cm curved extension

Even with such config the DCS Mosquito is still untameable. Waiting on Walmis to introduce the axis sensitivity/curve in the vpforce app, since using DCS curves on FFB axis is borked.

inpayne•4/19/23, 6:03 PM

Being able to add some curves would be greatly appreciated

Magpie•4/19/23, 9:12 PM

The mozzie is definitely finicky to get the crosshairs on target but it flies well. One day it will hopefully just click for you

peachmonkey•4/19/23, 9:15 PM

Mosquito is just too sensitive with a stick. I have to use a curve of 50 in DCS (without FFB) to fly it comfortably, it allows for much better guns control, and overall is pleasant. Without curves it's like 1mm up and it's stalling, 1mm down and it's diving...

Magpie•4/19/23, 9:32 PM

That was my initial impression, yes
I got a little more into constantly trimming for starters
And I think my brain just got used to moving the stick by tickle only
I'm quite happy in it now and I've had some fun dogfighting it on the 4ya server too when an a8 shows up and thinks he can turnfight it

peachmonkey•4/19/23, 9:34 PM

i get it, but what's the point of having an FFB if all you do is tickle it?

Magpie•4/19/23, 9:42 PM

If you're turning in it the ffb helps
To be honest I think we just need stronger motors to make it better

peachmonkey•4/19/23, 9:57 PM

Yeah... Rhino's motor strength is perfect with 10cm extension, with the innate gimbal's height it's at ~23cm total + grip, at least to me. With the additional 20cm I added = yes, motors could be 30% stronger, but frankly I already got used to the current strength, so it doesn't bother me too much if at all....

peachmonkey•4/19/23, 10:03 PM

if there are stronger motors available that I can fit in to the Rhino's enclosure I'd be totally up to swapping them out...

Ppeachmonkey Mosquito is just too sensitive with a stick. I have to use a curve of 50 in DCS...

skyPickle•4/19/23, 10:16 PM

also you need to set the brake saturation at 30 so when you touch them you dont nose over

peachmonkey•4/19/23, 10:23 PM

my comments were about the ptich/roll axis, the FFB ones. The brakes are non-ffb so curves for those work just fine, yup..

inpayne•4/20/23, 12:04 AM

Even on the f14 for example I’d like to have a bit either curve or stronger resistance. Which I know the stick itself is capable of but it just isn’t set up that way so idk

Wwalmis Yeah, need to clean up the code a bit before releasing

Stoned Kakapo•4/20/23, 12:26 AM

this makes my harrier mechanic ass, very happy

Reed•4/20/23, 1:08 AM

Dual lock???

RReed Dual lock???

TC-Durham•4/20/23, 1:43 PM

It's a heavier duty version of velcro - https://www.amazon.com/3M-Dual-Lock-Reclosable-Fastener/dp/B007OXK1AK

3M Dual Lock Reclosable Fasteners Heavy Duty Industrial Use Black T...

Unlock simplicity, super strength and ultimate ease. The remarkable 3M Dual Lock Reclosable Fastener can be opened and closed up to 1,000 times before losing 50% of its original strength, for repeated access or repositioning. The mushroom heads easily slide over each other allowing positioning of...

PiNKSH!T•4/20/23, 1:49 PM

that stuff is really handy, I use it currently to mount my throttles as I swap them out, also for button boxes etc.

recoilfx•4/20/23, 2:59 PM

I use it to mount my bass shaker, and even my self built gimbal. It's not squishy like regular velcro, but more like a hard mounting plastic.

Reed•4/20/23, 5:51 PM

Interesting. Thanks homie

ee.man•4/21/23, 12:05 AM

Hello all, new here. Not looking forward to 12+ months of wait!

TC-Durham•4/21/23, 1:14 AM

Means that I cannot set any buttons in dcs as this is always pushed.

TC-Durham•4/21/23, 1:14 AM

Also is there a way I can get my brake axis on the stick to act as axis rather than button?

Original message was deleted

PiNKSH!T•4/21/23, 1:45 AM

what stick are you using? are you using the lopback app?

Eee.man Hello all, new here. Not looking forward to 12+ months of wait! 🤪

PiNKSH!T•4/21/23, 1:45 AM

it'll be worth the wait

PiNKSH!T•4/21/23, 1:46 AM

or buy a kit

Original message was deleted

PiNKSH!T•4/21/23, 1:47 AM

that looks like the older software too, might as well update to the latest firmware & config app, the endstops are 10x better with the new stuff

PPiNKSH!T that looks like the older software too, might as well update to the latest firmw...

TC-Durham•4/21/23, 1:54 AM

See you are a Rhino owner, so maybe you can help me get going - I assure you I have read the manual in full and have it in front of me!

TTC-Durham See you are a Rhino owner, so maybe you can help me get going - I assure you I h...

PiNKSH!T•4/21/23, 2:06 AM

I have the vkb version of that grip, the mcgu, when I link it with the loopback app I get a constant button press from the flip down trigger, have you checked the flip trigger? Sorry I know that's an obvious one but just a start point

TC-Durham•4/21/23, 2:07 AM

It is the first press on the main trigger - the trigger guard seems to be working fine.

TTC-Durham It is the first press on the main trigger - the trigger guard seems to be workin...

PiNKSH!T•4/21/23, 2:07 AM

oh move this to support

TC-Durham•4/21/23, 2:08 AM

TTC-Durham Means that I cannot set any buttons in dcs as this is always pushed.

Magpie•4/21/23, 4:13 AM

Maybe you can set it to inverted just while you bind it

TonyM•4/21/23, 4:54 AM

What does "Reservation Status: Waiting" means?
Am I not supposed to get a reservation number for example?

Popo•4/21/23, 6:20 AM

don't worry - it seems that bot is having a hard time

TTonyM What does "Reservation Status: Waiting" means? Am I not supposed to get a reserv...

walmis•4/21/23, 7:28 AM

Should be updated now

walmis•4/21/23, 12:02 PM

I'm starting to think curves with FFB are a bit too complicated.
Let's say we trim to this position, what happens next? We end up on a rising slope and small inputs will cause large outputs. The curve benefits are then nullified. Not sure if it's plausible to move the curve along with the trim position, will need to research into that.

TheAmazinGreat•4/21/23, 12:59 PM

Difficult because the output endpoints need to remain at (-1,-1) and (1,1). So if you shift the 0,0 to the trim position it changes the shape of the curve

If I read correctly what W wrote: once he releases next TelemFFB version you will specify in its con

Similar Threads