Hello all, new here. Not looking forward to 12+ months of wait! 🤪
Hello all, new here. Not looking forward to 12+ months of wait! 
TMeans that I cannot set any buttons in dcs as this is always pushed.
TAlso is there a way I can get my brake axis on the stick to act as axis rather than button?
Pwhat stick are you using? are you using the lopback app?
Pit'll be worth the wait
Por buy a kit
Pthat looks like the older software too, might as well update to the latest firmware & config app, the endstops are 10x better with the new stuff
TSee you are a Rhino owner, so maybe you can help me get going - I assure you I have read the manual in full and have it in front of me!
PI have the vkb version of that grip, the mcgu, when I link it with the loopback app I get a constant button press from the flip down trigger, have you checked the flip trigger? Sorry I know that's an obvious one but just a start point
TIt is the first press on the main trigger - the trigger guard seems to be working fine.
Poh move this to support
TOk
MMaybe you can set it to inverted just while you bind it
TWhat does "Reservation Status: Waiting" means?
Am I not supposed to get a reservation number for example?
Am I not supposed to get a reservation number for example?
Pdon't worry - it seems that bot is having a hard time
WShould be updated now 
WI'm starting to think curves with FFB are a bit too complicated.
Let's say we trim to this position, what happens next? We end up on a rising slope and small inputs will cause large outputs. The curve benefits are then nullified. Not sure if it's plausible to move the curve along with the trim position, will need to research into that.
Let's say we trim to this position, what happens next? We end up on a rising slope and small inputs will cause large outputs. The curve benefits are then nullified. Not sure if it's plausible to move the curve along with the trim position, will need to research into that.
TDifficult because the output endpoints need to remain at (-1,-1) and (1,1). So if you shift the 0,0 to the trim position it changes the shape of the curve
WYeah introducing non-linearity is 
WNo wonder why DCS curves are broken with FFB 
DTook me a hot minute to figure this out with my Brunner. With RHINOs increased motor strength, larger control throws should negate the need for curves I would think. At least what I’m hoping.
TThanks! I have now an assigned S/N! 
YI'm glad I don't do curves. I might be missing out but at least things act the same all the time
Phi, @walmis , what about adding Saturation? I.e. there's no curve, it's a straight line, except it doesn't reach 1 or -1 and ends at 0.5 and -0.5? It would work great for DCS Mossie. The DCS saturation on its FFB axis is also borked...
WI think mossie is a special case that could be solved in telemFFB like the harrier
Pthat would be lovely @walmis is there a doc where I can possibly read-up on how to do it?
P@walmis I found your post about the harrier above
Pdoes Mossie have a Static FFB? (what does it even mean?)
WI'll probably need to take free trial to check what's up with the mossie to understand how to fix it.
Static FFB means that the spring force is not changing and works like a regular joystick.
Static FFB means that the spring force is not changing and works like a regular joystick.
Punderstood, thank you, @walmis , I appreciate your support on this as usual.
Jas the community of owners grows, so too will the amount of knowledge we can share with each other based on experience and figuring stuff out
Jicymi DCS Normandy 2.0 is out now, and 50% off all WWII fighters until May 21st
MThe mozzie is fine, it's similar to how the spitfire feels. Very twitchy initially and then once you get used to it it's fine.
Unlike the hurricane that was heavier and needed wrenching around.
Unlike the hurricane that was heavier and needed wrenching around.
JPSA https://stormbirds.blog/2023/04/21/gog-delisting-falcon-with-rights-change/
Have until April 27th to get this DRM free before it is delisted https://www.gog.com/en/game/falcon_collection
Have until April 27th to get this DRM free before it is delisted https://www.gog.com/en/game/falcon_collection
StormbirdsShamrockOneFive
Since 2016, one of the ways to get the original Falcon 4.0 was through the storefront at GOG.com. The original version could then be upgraded to the latest community created BMS release from there.…
GOG.com
Falcon Collection includes the following:
- Falcon
- Falcon A.T.
- Falcon Gold (featuring
KDefinitely a no brainer buy if you at all like combat sims.
PThis still has the best dynamic campaign out of any combat sim, ever since I played DCS & IL2 I've heard people comment 'if only DCS/IL2 had Falcon 4's dynamic campaign'. Falcon 4.0 Allied Force was the first PC combat flight sim I really played, by the time I BMS was up & going & was clearly the way to go over FreeFalcon I started playing DCS & IL2, though I was already playing IL2 1946 the same time as Falcon 4.0 AF
W!status
VHey @warwolf09,
So the last Shipped RHINO is #0081 on 2023-04-18
Average waiting time from preorder to shipped is 156 days, median is 191 days, max is 217 days
81 Rhinos are shipped in total
So the last Shipped RHINO is #0081 on 2023-04-18
Average waiting time from preorder to shipped is 156 days, median is 191 days, max is 217 days
81 Rhinos are shipped in total
Bjust have to say this after getting to test the rhino for an hour today after getting it last week: no idea how realistic my settings are, but having to use both hands to pull up a plane in msfs in certain situations is just awesome, great immersion
TIs anybody using their Rhino with the Next Level Boeing flightsim cockpit? Interested to see how you mounted it…
WBeen away for a while. is there any update on the telemetry for MSFS ? cheers
SI only worry that itll make my Honeycomb yoke feel like a toy!
Pfunny you say that, mine has taken a backseat since getting the Rhino 
PI'm guessing it'll end up becoming a ffb yoke with a VPforce kit eventually
Lwalmis is working on it
TAnyone with feedback on the Brunner FFB pedals?
Thinking of these pedals together with the Rhino.
Thinking of these pedals together with the Rhino.
WWhat do you want to know ? Mine work great and very strong. But sadly no feedback of course. More likely to get feedback from Walmis' telemetry hacks in the future with a home built pedal than for Brunner to implement something. But they are built well and work well.
TWhat do you mean no FFB? I thought that the Brunner pedals were giving FFB…like for their flight stick.
WWhat I mean is nothing from any games.
WIf the information was there it would be different. Hence my comment about Walmis' telemetry hack. But it's only for the joystick at this time. But I'm sure it could incorporate yaw effects in the future.
TWow, …I almost ordered the Brunner pedals and also given their price I would have been mad to see that they are not giving any FFB from the rudder etc…
In that case I will keep my MFG Crosswinds w/ damper and the Buttkicker Advance that I have attached to it…..and hopefully in the future we will have some FFB pedals from Walmis or some hack from his software for the Brunner pedals….
Thanks for the info!!!
In that case I will keep my MFG Crosswinds w/ damper and the Buttkicker Advance that I have attached to it…..and hopefully in the future we will have some FFB pedals from Walmis or some hack from his software for the Brunner pedals….
Thanks for the info!!!