I think it has to be FFB. Otherwise why would they have that whirring sound. It implies something el

I think it has to be FFB. Otherwise why would they have that whirring sound. It implies something electronic. I’ll eat my hat if it turns out to not be ffb

WWill3D I think it has to be FFB. Otherwise why would they have that whirring sound. It ...

PiNKSH!T•5/8/23, 8:54 AM

Yeah I mean, why not? it'd be such an awesome feature & as they make a point of in the video, it was a very well loved unit so why not improve it & release a v2.0 & having the ATC feature work would be a really cool thing to add. On a half related note, I hope they release an A-10 throttle grip to go with the Orion 2 & the new throttle too, unless I'm mistaken the a-10 throttle grip is the same as the f15e too isn't it? I mean they really would be living up to their logo then, ultimate warthog killer then

there's be no reason left to buy a TM warthog throttle anymore.

PPiNKSH!T Yeah I mean, why not? it'd be such an awesome feature & as they make a point of ...

Will3DOP•5/8/23, 9:42 AM

Makes sense. They have also mentioned working on a ffb joystick for some time.

Jon (Bounty_V)•5/8/23, 10:44 AM

For future proofing I hope they do a few things with the new throttle.

Aside from aforementioned things it should have support for multiple throttle grips. Imagine having the F-16 throttle grip + gate on it? Or a COLLECTIVE grip. This needs to be a thing. Give existing owners even more of a reason to upgrade.

Jon (Bounty_V)•5/8/23, 10:45 AM

Also if they do an F-15E/Warthog throttle grip, I hope they work on more panel stuff that isn't just F-18. F-16, F-15E, A-10 panel stuff would be amazing.

Jon (Bounty_V)•5/8/23, 10:50 AM

If any rhino owners didn't yet have il2 but want to get into it for cheap a sale just started on all products https://twitter.com/il2bos/status/1655516926485970944?t=d_qrT9NCb5eHFNVCMBPYzA&s=19

IL-2 Sturmovik: Great Battles (@il2bos)

Victory Day in Europe sale
Congratulations on the 78th Anniversary of the Victory Day in Europe!
All IL-2 products are available up to 78% OFF at https://t.co/f0NaUGOZt3 and on Steam.

Twitter

•

5/8/23, 10:16 AM

PPolack-1 Another question: I don't know if I broke anything when installing Virpil stuff,...

Polack-1•5/8/23, 12:22 PM

Okay, when I cold start it it seems to work, air start doesn't, for some reason.

Reed•5/8/23, 11:00 PM

My rhino is delivered but I’m in Maui. I’ll be home in 2 days to open her up

Reed•5/8/23, 11:00 PM

RReed Click to see attachment

Jacob M•5/9/23, 12:14 AM

looks like olowalu landing! enjoy the surf!

Jon (Bounty_V)•5/9/23, 5:34 PM

https://mfg-sim.com/en/MFG%20-Blog/news/rudder-pedals-stock-outage For info, here is when MFG Crosswind V3 pedals will be back in stock (June 10)

Milan Flight Gear

Rudder pedals stock outage

We will be out of stock till approx 10.June.2023 untill new batch of electronics arrive :-( I hope you have patience to wait. Of course, chip shortages are the reason of this outage - ordered more than a year ago and still waiting :-( We even redesigned electronics for different chip but abandoned the idea as chips finally ,almost, arrived Than...

Reed•5/9/23, 11:19 PM

Before I board my plane what can I download to start looking at how to install the rhino and bind keys and adjust settings. I fly dcs helicopters and msfs helicopters only.

RReed Before I board my plane what can I download to start looking at how to install t...

PiNKSH!T•5/10/23, 3:48 AM

Hey m8, not too sure what you can do to 'get ready' for the Rhino. What you need is the VPforce Config software, also for DCS (soon msfs too) the Telemetry app will give you ffb effects for all the aircraft, you can tweak this further later, if I understand it right it only adds effects it won't overwrite any native ffb effects from the module. MSFS currently needs paid 3rd party software most ppl use XPForce though there are other options, the VPforce telem app is being worked on for msfs compatibility too, should be released soon. The VPforce Loopback app is also handy, if you have a grip that doesn't plug directly into the Rhino base i.e. VKB grip with passthrough adapter, or a custom grip that has it's own usb, you can use the Loopback app to make the sim see the grip & Rhino as one unit, can also use HID Hide too if you want to hide the grip from being seen by the game too.

PiNKSH!T•5/10/23, 3:52 AM

the DCS heli's force trim should 'just work' otb with the Rhino, just make sure in DCS settings you have the FFB enabled (obviously) but also special settings for each heli & make sure the force trim is set to default, not no spring & FFB, that should read 'no spring or FFB'. Trim in general should work too for warbirds etc. If you use a mod aircraft like the blackhawk you will need to add it to the Telem app config, but also in the VPforce config software you need to bind buttons for force trim in the 'Effects' tab

356thFS_Piranha•5/10/23, 4:29 AM

@86th_piranha

356thFS_Piranha•5/10/23, 4:29 AM

86th_Piranha#6935

356thFS_Piranha•5/10/23, 4:31 AM

!86th_Piranha#6935

Jacob M•5/10/23, 4:44 AM

Think im gonna have slipping issues running a 72 and 12 tooth pulley this close together? Im getting about 30% engagement on the 12 tooth. I could include some bearings as tensioners

legobirds•5/10/23, 9:29 AM

I found a bug, when you change the seat from pilot to gunner in Apache, the FFB will not work anymore, you've got no hardware trim.

legobirds•5/10/23, 9:29 AM

anyone had the problem before?

VPforceBot•5/10/23, 9:58 AM

:package:

RHINO #0091 Has Shipped!

VPforceBot•5/10/23, 9:58 AM

:package:

RHINO #0092 Has Shipped!

Llegobirds I found a bug, when you change the seat from pilot to gunner in Apache, the FFB ...

walmis•5/10/23, 10:03 AM

That sounds like it could be a DCS bug

Jon (Bounty_V)•5/10/23, 10:29 AM

I've heard of/experienced similar desync issues with other modules that have switchable seats

JJacob M Think im gonna have slipping issues running a 72 and 12 tooth pulley this close ...

ju_caesar•5/10/23, 10:56 AM

You definitely do have an increased risk of shearing off the teeth with only 3.6 teeth in mesh. The number of teeth a belt needs in order to transfer the highest working force a belt should be used with to the pulley is about 6.
With some rough calculation your safety factor from shearing off the teeth, assuming you use a 9mm belt, is only 1.15.
I would certainly advise you to use an idler to increase the number of meshed teeth.

MattGoodman•5/10/23, 12:59 PM

Hi @walmis - Looking for a quick release mount for the Rhino and wondered if the screw dimensions were the same as anything else? I ask because the monstertech plate you supplied was for something else right? Maybe a large Virpil base? Or is it unique and the monstertech is bespoke to the Rhino? Thanks!

MMattGoodman Hi @walmis - Looking for a quick release mount for the Rhino and wondered if the...

walmis•5/10/23, 1:00 PM

Hi, the MT plate was custom designed for the Rhino.

Wwalmis Hi, the MT plate was custom designed for the Rhino.

MattGoodman•5/10/23, 1:02 PM

ah, good to know! I'll have to work something out then as it's all mounted to a 8040 alu frame on a yaw2 and need to keep weight down so want to swap out the rhino weight for a fanatec csl dd when driving. Been tricky to find a solution so far

Jon (Bounty_V)•5/10/23, 1:07 PM

I assume m8 or m6 screws

Jon (Bounty_V)•5/10/23, 1:08 PM

Fastest would be to quick release where the monstertech mount interfaces with the 8040 frame

Jon (Bounty_V)•5/10/23, 1:09 PM

I'm planning to do something similar for throttle

Jju_caesar You definitely do have an increased risk of shearing off the teeth with only 3.6...

Jacob M•5/10/23, 1:19 PM

great thanks for the response

JJon (Bounty_V)Fastest would be to quick release where the monstertech mount interfaces with th...

MattGoodman•5/10/23, 4:33 PM

Thanks. It could be either m8 or m6. For everything else I've used the quick releases from https://qr4rigs.com/ which have been great for swapping out pedals with rudders and the wheel and they do have some generic ones so I'm seeing what can be done there

QR4Rigs, Quick release Mounts for Sim Rigs, Change your rig in seco...

QR4Rigs, Quick release Mounts for Sim Rigs : - Quick Release System Fanatec Authentikit Honeycomb Kensington Logitech/Saitek MFG MOZA Racing SIMagic Simucube Thrustmaster VRS Virpil (VPC) VKB Dust Plates Winwing Universal QR4rigs Systems 40-Series Profile Interface Kits Quick Release Base Mounts VNM Turtle Beach quick release, quick release mou...

Jon (Bounty_V)•5/10/23, 4:34 PM

itd likely be 16-20mm in length

Jon (Bounty_V)•5/10/23, 4:34 PM

i think the monstertech mounts use counter sink screws so more likely to be 16mm

JJon (Bounty_V)i think the monstertech mounts use counter sink screws so more likely to be 16mm

MattGoodman•5/10/23, 4:38 PM

I'm currently mounting the rhino using the custom monstertech to a 4040 peice coming out from the long 8040 sides most rigs have as the foundation and that's working fine. Just wanted a faster way of removing it. I think Q4Rigs might have something, just need to dig down and be creative

Jon (Bounty_V)•5/10/23, 4:39 PM

Yeah since you already have it then you'll know exact lengths you need etc.

Jon (Bounty_V)•5/10/23, 4:41 PM

Speaking of, do you or anyone else happen to know what these circled parts would be called? Appear to be some sort of bolt spacer or something.

MattGoodman•5/10/23, 4:58 PM

I've not seen those before, they look useful though. Hope you find them!

JJon (Bounty_V)Speaking of, do you or anyone else happen to know what these circled parts would...

FlatSpin•5/10/23, 5:08 PM

You could always ask Randy from Laserwing since those pics are from his simpit.

Jon (Bounty_V)•5/10/23, 5:12 PM

True, I just didn't want to bother them if I didn't have to

Jon (Bounty_V)•5/10/23, 7:34 PM

https://fselite.net/content/jardesign-shares-preview-for-co-pilot-add-on-for-msfs/ For the MSFS players, this looks very promising even in early development stage

FSEliteCalum

JarDesign Shares Preview for Co-Pilot Add-On For MSFS - FSElite

Have a virtual co-pilot be able to interact with your aircraft in Microsoft Flight Simulator.

Reed•5/10/23, 11:55 PM

Just unboxed it.

Reed•5/10/23, 11:55 PM

PPiNKSH!T the DCS heli's force trim should 'just work' otb with the Rhino, just make sure ...

Reed•5/11/23, 12:29 AM

Excellent, just got home and unboxed. Will be a few days before I can install. My goal for now is getting the DCS helo's to work. I fly the 60 and huey mostly, but also give the 64 and mi8 some love.