DHey guys, just wondering if this kit can be used for something like a seat mover? In other words could you pull motion data from a sim and drive Surge, Sway and Yaw in a seat?
Adepends on the sim, but kind of yes
J#
faq #
knowledge-base has the info you need. I think there is an open source thing on github that could be used to interface with that in such a capacity but it might require some additional code writing on your part
faq #knowledge-base has the info you need. I think there is an open source thing on github that could be used to interface with that in such a capacity but it might require some additional code writing on your partAI don't know if it's the optimal solution, though
JWe're very early days software wise for Rhino related stuff. For example current iteration does not have rudder pedals yet afaik (referring to an answer from walmis in #
support a day or 2 ago)
support a day or 2 ago)
LTested it out in the ASK-21 & 23, and yeah, in the slip the rudder stays in it "pushed" position
PSadly mine has had a small fault ever since new - #3 doesn't register every time unless you press it in a particular way, which I suppose you learn to do after a while of ownership 
KI have a feeling that this is one of those things that you have to be looking for to find out. At least when I'm in a slip trying to hit my aiming point, the particular feel of the rudder pedals is not high on my list of things to think about. Appreciate you flying and finding the answer. I'll be back in the 2-33 in a couple weeks and will take careful note as well.
KThis is my first attempt at a variation on the shaft winding photos posted. I need to find a better way to secure the slippery, synthetic, zero stretch fishing line or move to the steel braided cable I also have. Overall the mechanism seems to work as expected though. 13:1 gear ratio. No backlash. No need for an exact timing belt. Just a prototype but I’m pleased so far.
V:package: 
RHINO #0099 Has Shipped!
RHINO #0099 Has Shipped!V:package: 
RHINO #0100 Has Shipped!
RHINO #0100 Has Shipped!
D100!!! celebrations!!
JNice
HCongrats!
JWalmis does vpforce have an Instagram? Was wanting to tag it when I share my unboxing pics
BHi VPforceBot, I filled out your VPforce RHINO Preorder and emailed it to you.
JYou just fill out the Google form in the faq. You can then dm the bot a command for updates on where you are at in the queue, and it will also dm you when it's time to pay etc.
The command is !info [your email from the form]
Without the [ ]
The command is !info [your email from the form]
Without the [ ]
BThis is my Current VPC Cyclic
BIn filling out the form, Discord handle
In the form name#1234. This will allow status updates via discord (in development)
B9#9487
Wrong user pattern
In the form name#1234. This will allow status updates via discord (in development)
B9#9487
Wrong user pattern
BAm I doing something wrong?
BDoes your form only work with GMAIL?
BDid you receive my order form?
JYou would receive an e-mail confirmation.
It is all automated.
It is all automated.
JIt just wants your discord name. B9#9487 is your current discord name.
B
DThis is the maximum Height My Cyclic can be on my Monstertech Cockpit 60.96 cm
WYou can try again, I fixed the form
BAre your measurements in mm?
WYes, it's mm and [inch]
BThis image I found in your reviews section is perfect absoletely perfect. I don't have permissions to message in the reviews section plus the support section.
BThe image above that I found in the reviews section is from KNIGHT
KI actually ended up dropping my floor plate down to get some more clearance.
KHere's how it sits today, until the arrival of my MPS seat...
JHave to thank monster tech tho, makes Rhino lead times feel short 
KNo joke - been waiting since December for my MPS and paid in full back then 
JI still need to order some parts from MonsterTech so I can mount flight sim gear to my new cockpit. Won't be able to place an order until July, so probably August or later to first use my Rhino 
KPlan for December
KLol
JLolol
Nman... I couldn't wait that long.. I'd be at the hardware store figuring out what I could glue/screw/weld together to get that puppy installed... 
I didn't want to wait for how long it would take to get the laser cut / bent parts for the virpil desk mount adapter I designed, so I went to my garage and started cutting scrap wood
I didn't want to wait for how long it would take to get the laser cut / bent parts for the virpil desk mount adapter I designed, so I went to my garage and started cutting scrap wood
WHow long are the wait times for this thing?
JWhat chair is that?
JLooks like the MPS from MonsterTech, with an Andre's Jetpad or similar on top
BIf you are referring to my image it is the Mosntertech Helicopter Pilot Seat
JSick
JI'm looking for seat that doesn't go up all the way, like a bench seat. So my VR isn't catching on the back headrest
DI just ordered VPC Constellation ALPHA Prime [R] Image plus VPC SharKa-50 Collective Grip, Plus the three VPC extensions.
BHere is a couple more pictures of my Monsterteck Helicopter Cockpit
PHey m8, just wondering what games/sims you use the HF8 with? Have they made the plugin for dcs yet? Can you use it with the software so it just reads the telem from a sim & not need their plugin or via the audio jack, the same software the andre's jet seat use? Cheers m8, nice set up too