hi everybody, still strugling to update from v2 to v3. In previous iterations of v2, upgrading was s

hi everybody, still strugling to update from v2 to v3. In previous iterations of v2, upgrading was straightforward as described in the documentation, however when attempting to update today, via the command: npm install -g wrangler

I get the following response and fail, wondering if anybody has any suggestions or experienced a similar situations and if anybody knows if any requirements changed that are not documented? Thanks.

message.txt7.07KB

micromashor•8/5/23, 10:16 PM

for

wrangler dev

wrangler dev

, is the

dev.host

dev.host

config property (and the rest of request forwarding) only respected in

--remote

--remote

mode? Digging through the wrangler source, that seems to be the case, and wrangler is returning 404 without even trying the upstream server specified in the config

micromashor•8/5/23, 10:21 PM

it also seems to ignore the route

captainOP•8/6/23, 12:00 AM

any cloudflare people here...

Ccaptain hi everybody, still strugling to update from v2 to v3. In previous iterations of...

Hello, I’m Allie!•8/6/23, 6:34 AM

Have you tried installing it locally?

Hello, I’m Allie!•8/6/23, 6:34 AM

Looking at the logs, it looks like you are running an M-series Mac, which should be supported

HHello, I’m Allie!Have you tried installing it locally?

captainOP•8/6/23, 6:46 PM

I've tried locally and globally with no luck, i have tried node 20 and latest version of node 18 with same issues. It looks like its getting tripped up with sqlite? And it looks like it's trying to find xcode dependancies (i dont want to install x-code stuff, and i didn't need to before). The instructions don't say anything about new system dependancies, so I shouldn't need to. And if they are needed it should be documented (i created a bug mention for the documentation but cloudflare team said to make a bug report in SDK repo), and I did yesterday but still no response. I wondering if cloudflare staff has attempted the instructions provided on a mac m1 without x-code installed.

captainOP•8/6/23, 6:51 PM

but that said..i'm stuck and still rocking v2.20...but want to dig into constellation with some more ideas I have!

captainOP•8/6/23, 6:51 PM

so i'm bummed

Original message was deleted

captainOP•8/6/23, 7:22 PM

i understand

Original message was deleted

captainOP•8/6/23, 7:24 PM

i've actually started bringing this issue up back in Jun 19, but just recently finished a project so now i can revisit

kian•8/6/23, 7:38 PM

It looks like you just have a generic

node-gyp

node-gyp

issue

kian•8/6/23, 7:38 PM

It needs xcode's command line tools

Kkian It looks like you just have a generic `node-gyp` issue

captainOP•8/6/23, 7:39 PM

do you know why this is occuring for v3 and not v2?

kian•8/6/23, 7:39 PM

Just a dependency that requires it, it says in the log

kian•8/6/23, 7:40 PM

node_modules/wrangler/node_modules/better-sqlite3

node_modules/wrangler/node_modules/better-sqlite3

Kkian It looks like you just have a generic `node-gyp` issue

captainOP•8/6/23, 7:40 PM

is it worth me mentioning to the cloudflare staff that this should be mentioned in their installation documentation or is this irrelevant to that? Either way thanks for the response and I will try it.

James•8/6/23, 7:43 PM

Sounds similar to https://github.com/cloudflare/workers-sdk/issues/3531, and will eventually not be a requirement anymore. It should definitely be documented though until that time, I agree.

JJames Sounds similar to https://github.com/cloudflare/workers-sdk/issues/3531, and wil...

captainOP•8/6/23, 7:49 PM

checking that thread out now, thank you

JJames Sounds similar to https://github.com/cloudflare/workers-sdk/issues/3531, and wil...

captainOP•8/6/23, 9:15 PM

Any suggestions on getting around this...I have command line tools installed

captainOP•8/6/23, 9:15 PM

but it looks like somebody is referenceing this as another problem:

captainOP•8/6/23, 9:15 PM

https://github.com/nodejs/node-gyp/issues/2869

GitHub

distutils is removed in Python 3.12 · Issue #2869 · nodejs/node-gyp

distutils is deprecated with removal planned for Python 3.12. See the What’s New entry for more information. Our only current use of Python distutils is at: node-gyp/gyp/pylib/gyp/input.py Line 19 ...

captainOP•8/6/23, 9:18 PM

has anybody successfully installed wrangle v3 on m1 mac with ventura?

James•8/6/23, 9:22 PM

Make sure you have

python3

python3

installed and available - if you run it via terminal, it should enter into a python prompt

James•8/6/23, 9:23 PM

Specifically, < 3.12

Original message was deleted

captainOP•8/6/23, 9:40 PM

logs are saying i'm running:
Python using Python version 3.8.2 found at "/Library/Developer/CommandLineTools/usr/bin/python3"

Original message was deleted

captainOP•8/6/23, 9:43 PM

yes its installed and typing in python3 gives it in the terminal as 3.8.2

Original message was deleted

captainOP•8/6/23, 9:45 PM

any other ideas...i also posted the logs when using latest version of node 18 @Leo are using mac with m1 and ventura?

captainOP•8/6/23, 9:45 PM

https://github.com/cloudflare/workers-sdk/issues/3708#issuecomment-1666958523

GitHub

🐛 BUG: Possible new dependancies not documented · Issue #3708 · clo...

Which Cloudflare product(s) does this pertain to? Wrangler core What version(s) of the tool(s) are you using? 2.4 What version of Node are you using? tested v18 and v20 What operating system are yo...

Original message was deleted

captainOP•8/6/23, 9:52 PM

damn...now have to figure out 7 gigs of data to delete to have room for the install..argg

AFKGuy•8/6/23, 10:35 PM

Wrangler Tree Shaking: I'm having trouble with tree shaking my workers when I bundle via wrangler. Does this happen by default or do I have to enable it? When I run

npx wrangler deploy --dry-run --outdir dist --minify=true

npx wrangler deploy --dry-run --outdir dist --minify=true

npx wrangler deploy --dry-run --outdir dist

npx wrangler deploy --dry-run --outdir dist

I can clearly identify dead code that isn't needed for the worker. I've set all my ts modules to "esnext", but still no good. I also don't see any way to adust the esbuild config. Any suggestions?

Trixrabbit•8/7/23, 12:25 AM

Is there any way in code or in wrangler settings to prevent wrangler from truncating the console.log of an object ?

Original message was deleted

captainOP•8/7/23, 12:25 AM

i created this issue: https://github.com/cloudflare/cloudflare-docs/issues/10230

GitHub

Wrangler install and upgrade documentation missing noting new depen...

Which Cloudflare product does this pertain to? Workers Existing documentation URL(s) https://developers.cloudflare.com/workers/wrangler/install-and-update/ What changes are you suggesting? New depe...

TTrixrabbit Is there any way in code or in wrangler settings to prevent wrangler from trunca...

James•8/7/23, 12:49 AM

This was a regression with wrangler 3 unfortunately. I’d recommend sharing your experience: https://github.com/cloudflare/workers-sdk/issues/3591

GitHub

🐛 BUG: Regression with console.log-ing objects · Issue #3591 · clou...

Which Cloudflare product(s) does this pertain to? Wrangler What version of Wrangler are you using? 3.2.0 What operating system are you using? Windows Describe the Bug Deep objects are no longer log...

JJames This was a regression with wrangler 3 unfortunately. I’d recommend sharing your ...

Trixrabbit•8/7/23, 12:53 AM

I don't know if it is the same issue, but wrangler logs my objects with

...

...

right in the middle. I don't think it is related to nested objects, but could be
e.g.

console.log(JSON.stringify(authObject));

console.log(JSON.stringify(authObject));

{"adapter":{},"sessionCookie":{"name":"auth_sessio…ubdomains":[],"experimental":{"debugMode":false}}

{"adapter":{},"sessionCookie":{"name":"auth_sessio…ubdomains":[],"experimental":{"debugMode":false}}

James•8/7/23, 12:54 AM

Interesting, sounds similar. What happens in wrangler 2 vs 3?

Trixrabbit•8/7/23, 12:54 AM

I've only used wrangler since v3 :/ no idea

TTrixrabbit Hey! I'm new using wrangler and so far I love it. I'm having a small issue in de...

Trixrabbit•8/7/23, 3:58 AM

For anyone stumbling on this, I made up a janky workaround using nodemon, there must be a better way to dev, but I couldn't find anything that worked.

// package.json
  "scripts": {
    "build:watch": "nodemon --watch src -e ts,svelte --exec \"vite build; touch reload.trigger\"",
    "wrangler": "nodemon -e trigger --exec \"rm reload.trigger; wrangler pages dev .svelte-kit/cloudflare \""
  },

// package.json
  "scripts": {
    "build:watch": "nodemon --watch src -e ts,svelte --exec \"vite build; touch reload.trigger\"",
    "wrangler": "nodemon -e trigger --exec \"rm reload.trigger; wrangler pages dev .svelte-kit/cloudflare \""
  },

I run

npm run build:watch

npm run build:watch

and

npm run wrangler

npm run wrangler

in 2 terminals. The first one build the app and create an empty .trigger file in the working directory. The other one watches for .trigger files (made up extension) and restarts wrangler then delete the .trigger file.
I was playing around with nodemon delays, but this seems more syncrhonous. This is the first time I used nodemon, I know it is janky.

kian•8/7/23, 7:51 AM

Most errors aren’t related to any code in Wrangler itself, just incompatibility with node-gyp and your workstation (missing xcode on macOS, some Python versions, etc) - what’s your specific error?

Euller Cristian•8/7/23, 12:03 PM

Hey Guys,

I have a question about workers, I need my worker to have two routes mysite.com.br and staging.mysite.com.br, I configured this in my wrangler.toml but when I type wrangler deploy --env staging

it creates a new app/worker and actually I just want a route from the same worker. May you help me please?

Vero•8/7/23, 3:28 PM

Heyo @Wrangler office hours will start in 30 min, join us MeowHeartCloudflare

https://discord.gg/cloudflaredev?event=1133767196494008442

heftymouse•8/7/23, 3:59 PM

hey yall i have an astro website on cloudflare pages that uses d1, is there any way i can use astro's dev server with the pages dev mode

heftymouse•8/7/23, 3:59 PM

currently making any ui changes with the backend working is very painful

James•8/7/23, 4:00 PM

You can use the "proxy" mode of pages dev... but it's still pretty painful unfortunately

JJames You can use the "proxy" mode of pages dev... but it's still pretty painful unfor...

heftymouse•8/7/23, 4:05 PM

ahh that's a shame, thanks though

heftymouse•8/7/23, 4:05 PM

i guess i'll have to just read a json file with a dump of the db

Hheftymouse i guess i'll have to just read a json file with a dump of the db

Trixrabbit•8/7/23, 4:52 PM

I'm not sure if I understand your question correctly, but I believe you can build your astro application locally and connect to your remote D1 using wrangler pages dev --d1=<your d1> --remotewrangler pages dev --d1=<your d1> --remote

Hheftymouse i guess i'll have to just read a json file with a dump of the db

Trixrabbit•8/7/23, 4:53 PM

If your DB schema is all done via migrations, you can also create a lot D1 that mimics your remote D1. You would need to seed some data into that instance though.

hi everybody, still strugling to update from v2 to v3. In previous iterations of v2, upgrading was s

Similar Threads

Similar Threads

Similar Threads