H
HJust lost forces again
WWhich sim? (FS2020 TelemFFB/XPforce?)
Also settings look not very optimal. You can load a good baseline profile from
Otherwise everything looks ok (no motor faults, etc). You can also show the Debug tab content.
Also settings look not very optimal. You can load a good baseline profile from
configs/RHINO-defaults.vpconfOtherwise everything looks ok (no motor faults, etc). You can also show the Debug tab content.
HIt's dcs
HI will try a baseline profile these days. Thank you!
HAnd no telemffb
H
Hloaded default profile , but now my brake lever on the joystick does not work anymore and i cannot set it up again...Unfortunately i have to stop testing now
WChange grip to the T-50CM2 and calibrate it
MThanks, having chosen bank transfer, I will be waiting for an invoice with an IBAN on, is that right?
HThanks I will try in the next days
Hhello, my rhino has just arrived and I have stumbled at the first hurdle. When trying to apply the stick setting on the web interface or checking the firmware I get the follow error. I have also restared the pc, removed the rhino from device manager multiple times, no joy unfortunately. Have disconnected and closed every other device/program as well
WThis bug happens in Win11 with the current firmware. Managed to make a one-liner workaround, but should be fixed in the upcoming firmware release.
Open up a PowerShell window as Administrator and paste the following
Then unplug and plug the Rhino USB
*Reboot might be required
Open up a PowerShell window as Administrator and paste the following
Then unplug and plug the Rhino USB
*Reboot might be required
HWill give it a go.. But I'm on windows 10!
WThe configurator application works right?
HYeah that loads and works fine
HThis worked, thank you!
H
HLost forces ahain, joystick with default profile p51 dcs
SHave you checked the wiring connection? Maybe there is a damaged cable?
HNo I have not, but if I quit dcs instantly the stick moves back due to spring effect. If I press fly to reload the mission. Ffb is back and works until it quit again.
H
HAnd again
H
F-100 points for not using snip
Mlol
Nwin+shift+s FTW
HI now tested without VR - same problem.
HThan tested without motion, same problem.
HThe last hour I was not using the dcs multithreading version. No problems at all. Joystick is working fine. So I will continue with the normal dcs version and hope that I will not have problems on longer flights too. Thank you @_slowmover for your help.
Ado you guys ever have issues where DCS seems to boot up with broken ffb support, like, maybe it kinda works, but not really, and you have to quit and re-launch DCS to fix it?
Dusually when my rhino isn't powered on causes that
Dturning it on when in DCS means it has trouble identifying itself..
Dthat last sentence could be taken out of context 
Aoh i always have my rhino on prior to launching DCS :/
Ado you use telemffb?
Awondering if it could be maybe somehow related to that app running before the game starts?
DI do, I usually start it up before running DCS
DDCS is usually the absolute last thing I start
D- Turn on VR
- Turn on RHINO
- Start SAP
- Start Voice Attack
- Start SRS
- Start OBS
- Start TelemFFB
- Start DCS
Ayeah, that's similar to me (albeit i don't do vr, but yeah, plug in controllers, launch gremlin/virpil link tool, opentrack, etc, then finally dcs
W@amadeus Can you try logging this issue in the vp configurator?
Ayeah, next time i boot up DCS, i'll have logging turned on and if it repros, post the log here
Jwhy did you have to re-orient your rhino base when you attached the z-extension? In order to have the stick as close as possible to my seat, I was planning to mount the rhino with the buttons forward and invert the axes.
MFor me, with the Z extension, it was TOO far back as you describe. Z extension and buttons nearest me works perfectly now. Of course, your set up may be different, I have limited space in front due to my centre MPCD
Jwhen using a Virpil grip with the Rhino base, I'm assuming that the Virpil software can no longer be used to customize the grip? With the Virpil software I created button presses at the end of the travel on each axis on the thumb stick, so that it can also work as a hat. Will I lose this functionality when connecting to the Rhino?
Acorrect -- you cannot use virpil software anymore for the grip or rhino base
NThe virpil software won't work. but the configurator software supports adding button events to the thumb stick (at least on the Alpha).
J