VPforce Controls•3y ago

It's dcs

harryOP•9/11/23, 4:43 AM

I will try a baseline profile these days. Thank you!

harryOP•9/11/23, 5:48 AM

And no telemffb

Hharry It's dcs

walmis•9/11/23, 5:52 AM

Try flying with debug tab open, the log might give some clues

harryOP•9/11/23, 5:53 AM

harryOP•9/11/23, 2:27 PM

loaded default profile , but now my brake lever on the joystick does not work anymore and i cannot set it up again...Unfortunately i have to stop testing now

Hharry loaded default profile , but now my brake lever on the joystick does not work an...

walmis•9/11/23, 3:03 PM

Change grip to the T-50CM2 and calibrate it

Wwalmis Hi, All good, I have accepted your order 🙂

Mr. S•9/11/23, 6:53 PM

Thanks, having chosen bank transfer, I will be waiting for an invoice with an IBAN on, is that right?

Wwalmis Change grip to the T-50CM2 and calibrate it

harryOP•9/11/23, 7:59 PM

Thanks I will try in the next days

Hazzer111•9/12/23, 12:48 PM

hello, my rhino has just arrived and I have stumbled at the first hurdle. When trying to apply the stick setting on the web interface or checking the firmware I get the follow error. I have also restared the pc, removed the rhino from device manager multiple times, no joy unfortunately. Have disconnected and closed every other device/program as well

HHazzer111 hello, my rhino has just arrived and I have stumbled at the first hurdle. When t...

walmis•9/12/23, 1:54 PM

This bug happens in Win11 with the current firmware. Managed to make a one-liner workaround, but should be fixed in the upcoming firmware release.
Open up a PowerShell window as Administrator and paste the following

Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Enum\USB\VID_FFFF&PID_2055&MI_03\*\Device Parameters" -Name "DeviceInterfaceGUID" -Value "{DA10CDEF-26A6-47D9-970E-B3D561A277FA}"

Set-ItemProperty -Path "HKLM:\SYSTEM\CurrentControlSet\Enum\USB\VID_FFFF&PID_2055&MI_03\*\Device Parameters" -Name "DeviceInterfaceGUID" -Value "{DA10CDEF-26A6-47D9-970E-B3D561A277FA}"

Then unplug and plug the Rhino USB

*Reboot might be required

Hazzer111•9/12/23, 2:01 PM

Will give it a go.. But I'm on windows 10!

walmis•9/12/23, 2:02 PM

The configurator application works right?

Hazzer111•9/12/23, 2:26 PM

Yeah that loads and works fine

Wwalmis This bug happens in Win11 with the current firmware. Managed to make a one-liner...

Hazzer111•9/12/23, 2:48 PM

This worked, thank you!

harryOP•9/12/23, 6:18 PM

harryOP•9/12/23, 6:19 PM

Lost forces ahain, joystick with default profile p51 dcs

slowmover•9/12/23, 6:24 PM

Have you checked the wiring connection? Maybe there is a damaged cable?

harryOP•9/12/23, 6:38 PM

No I have not, but if I quit dcs instantly the stick moves back due to spring effect. If I press fly to reload the mission. Ffb is back and works until it quit again.

harryOP•9/12/23, 6:39 PM

harryOP•9/12/23, 6:49 PM

And again

harryOP•9/12/23, 6:49 PM

FlatSpin•9/12/23, 6:56 PM

-100 points for not using snip

Mustang 1-1•9/12/23, 6:59 PM

lol

Number481•9/12/23, 7:00 PM

win+shift+s FTW

harryOP•9/12/23, 7:00 PM

I now tested without VR - same problem.

harryOP•9/12/23, 7:01 PM

Than tested without motion, same problem.

harryOP•9/12/23, 8:00 PM

The last hour I was not using the dcs multithreading version. No problems at all. Joystick is working fine. So I will continue with the normal dcs version and hope that I will not have problems on longer flights too. Thank you @_slowmover for your help.

amadeus•9/13/23, 5:03 AM

do you guys ever have issues where DCS seems to boot up with broken ffb support, like, maybe it kinda works, but not really, and you have to quit and re-launch DCS to fix it?

ddrake1984•9/13/23, 5:46 AM

usually when my rhino isn't powered on causes that

ddrake1984•9/13/23, 5:46 AM

turning it on when in DCS means it has trouble identifying itself..

ddrake1984•9/13/23, 5:46 AM

that last sentence could be taken out of context

amadeus•9/13/23, 6:01 AM

oh i always have my rhino on prior to launching DCS :/

amadeus•9/13/23, 6:01 AM

do you use telemffb?

amadeus•9/13/23, 6:02 AM

wondering if it could be maybe somehow related to that app running before the game starts?

Aamadeus do you use telemffb?

ddrake1984•9/13/23, 6:06 AM

I do, I usually start it up before running DCS

ddrake1984•9/13/23, 6:06 AM

DCS is usually the absolute last thing I start

ddrake1984•9/13/23, 6:08 AM

Turn on VR
Turn on RHINO
Start SAP
Start Voice Attack
Start SRS
Start OBS
Start TelemFFB
Start DCS

amadeus•9/13/23, 6:15 AM

yeah, that's similar to me (albeit i don't do vr, but yeah, plug in controllers, launch gremlin/virpil link tool, opentrack, etc, then finally dcs

walmis•9/13/23, 6:24 AM

@amadeus Can you try logging this issue in the vp configurator?

amadeus•9/13/23, 6:39 AM

yeah, next time i boot up DCS, i'll have logging turned on and if it repros, post the log here

Mmark turner OK, my Virpil Z extension arrived earlier so have installed it. This involved re...

jc523•9/13/23, 6:53 PM

why did you have to re-orient your rhino base when you attached the z-extension? In order to have the stick as close as possible to my seat, I was planning to mount the rhino with the buttons forward and invert the axes.

mark turner•9/13/23, 7:49 PM

For me, with the Z extension, it was TOO far back as you describe. Z extension and buttons nearest me works perfectly now. Of course, your set up may be different, I have limited space in front due to my centre MPCD

jc523•9/13/23, 7:52 PM

when using a Virpil grip with the Rhino base, I'm assuming that the Virpil software can no longer be used to customize the grip? With the Virpil software I created button presses at the end of the travel on each axis on the thumb stick, so that it can also work as a hat. Will I lose this functionality when connecting to the Rhino?

Jjc523 when using a Virpil grip with the Rhino base, I'm assuming that the Virpil softw...

amadeus•9/13/23, 9:56 PM

correct -- you cannot use virpil software anymore for the grip or rhino base

Jjc523 when using a Virpil grip with the Rhino base, I'm assuming that the Virpil softw...

Number481•9/13/23, 9:57 PM

The virpil software won't work. but the configurator software supports adding button events to the thumb stick (at least on the Alpha).