I must be doing something wrong because it’s underwhelming so far
I must be doing something wrong because it’s underwhelming so far
NI don't have the F1 so I don't know what its FFB implementation is like, but.. what exactly are you expecting? FFB by itself (without TelemFFB in the picture) will completely depend on a given modules implementation and will usually consist of dynamic stick forces if the module is not FBW hydraulic and maybe AoA/Stall shake.
MIn addition to the constant effects I put in the configurator. In spitfire and 109 Only some shaking at high AoA.
Nthats all you'll get for those modules unless you are running TelemFFB. Dynamic stick forces and AoA shake.
The default settings in TelemFFB for both of those aircraft should have engine rumble, gunfire, runway rumble, g-force loading, elevator droop (simulate weight of elevator when stopped), gear/flaps/canopy/speedbrake motion, gear/speedbrake drag buffeting
The default settings in TelemFFB for both of those aircraft should have engine rumble, gunfire, runway rumble, g-force loading, elevator droop (simulate weight of elevator when stopped), gear/flaps/canopy/speedbrake motion, gear/speedbrake drag buffeting
MWhat is dynamic stick forces?
Nspring gain changes based on your airspeed.. when stopped, the controls are floppy. when near stall speed, the controls are mushy.. in flight, the spring is tight and self centering
MI’m not feeling this noticeably. I must have the settings incorrectly set
Nnext best suggestion I have is to post screenshots of your settings and effects tab in VPf configurator (maybe do it in #
support just so we stop spamming this channel)
support just so we stop spamming this channel)MFair
G!status
VHey @geezalbert,
So the last Shipped RHINO is #0204 on 2023-09-26
Average waiting time from preorder to shipped is 205 days, median is 219 days, max is 292 days
202 Rhinos are shipped in total
So the last Shipped RHINO is #0204 on 2023-09-26
Average waiting time from preorder to shipped is 205 days, median is 219 days, max is 292 days
202 Rhinos are shipped in total
Owhat time period is that over?
LA question regarding the hydraulic feel. Right now i got two 1:5 rc dampers hooked on to my vkb gunfighter and was looking to get a virpil to add mc steering dampers as it have a 3d print design available for steering dampers setup (the one mfg uses for example)
But i much rather get the VP rhino instead
Might be hard to give a general answer on but in summary if anyone here is an irl active or former pilot or have a similar diy hydrualic dampened sim joystick like me and a VP rhino i would really appreciate your opinion on how well force feedback motors emulate hydrualic feeling
But i much rather get the VP rhino instead
Might be hard to give a general answer on but in summary if anyone here is an irl active or former pilot or have a similar diy hydrualic dampened sim joystick like me and a VP rhino i would really appreciate your opinion on how well force feedback motors emulate hydrualic feeling
MOwn rhino, but never flown. Do have a damper on my pedals, and I will say the rhino software really let's you dial it in, and it feels more similar to the hydraulic damper, than to the friction dampers that VKB and Virpil use. The software lets you dial in dampening, friction, and inertia to your liking
Amy only experience with hydraulic dampers is the one on my mfg pedals
AI also tried to get different dry clutches to work but always got way too much sticktion for my taste
Aas far as I can tell the rhino is in a league of its own, the abovementioned adjustments give you the possibility to set it up pretty much to your liking
ADry clutches have a lot of stiction issues
ANyogel can help, but it’ll never fully fix it
AJust a physical limitation
ANeed a wet clutch or a rhino 
Si built my old stick gimbal using teflon sheets under a spring, had very little stiction. but rhino is sooo much better
AMy problem is that I'm extremely allergic to sticktion but I want dampening
AWell that was a problem
Athere's not much opportunity for sticktion to happen when the motors start applying dampening only after they sense movement
MHi I'm new here. Im trying to save for a F-16 setup and was wondering how much this cost?
MIm very interested in it and believe it would be amazing to have
F#?faq
MSorry
JSo Meta Connect is in 13.5 hours, we'll likely see final details about Meta Quest 3 and release date.
Meanwhile Valve has been busy with SteamVR stuff and rolled out 2.0 beta very recently. Exciting stuff happening in VR that could help improve flight sim
Meanwhile Valve has been busy with SteamVR stuff and rolled out 2.0 beta very recently. Exciting stuff happening in VR that could help improve flight sim
BNot true , despite having hydraulic controls most (if not all?) hydraulicly powered aircraft will have an artificial feel unit installed (Q-Feel) to mimic aerodynamic forces increasing on the stick as the speed increases.
BIt's to prevent over stressing the airframe
V:package: 
RHINO #0205 Has Shipped!
RHINO #0205 Has Shipped!
MNope. Most of them really don't adjust forces on the stick as the aircraft goes faster. Q-Feel is a name of the system installed in the Harrier that does that, but only in the elevator channel. Something similar is also installed in the F-4 elevator control system. But other aircraft, like F-14, F-15, F-18, A-10, F-86 etc. don't do that.
MThey only have a centering force (cam & springs), that usually moves with the trim.
MBobweights are common and they increase the force on the stick with G-loads. Personally I don't like this effect in the sim, as it can't be properly felt if you don't experience gforces yourself. Others like it, it can be tweaked in TelemFFB to your taste
MInterestingly, IL-2 also simulates bobweights in the Spitfire Mk V and Nieuport 17, which as I understand is true to real life.
BOh right, I misunderstood it then.
BIf specifically looking for an f16 it is the one aircraft this can't simulate better than anything else.
Since its using a force cm sending system with very little movement.
For that, specifically, I'd look into the realsimulator.com force sensing gimbal and grips.
But it's at least a 1k euro for the gimbal and grip.
Since its using a force cm sending system with very little movement.
For that, specifically, I'd look into the realsimulator.com force sensing gimbal and grips.
But it's at least a 1k euro for the gimbal and grip.
SHigh hopes for a new headset from valve
JWould be nice
Fwhat about the winwing f16 mfssb?
MOkay thank you. Im looking to get a VR headset and a good hotas so I might go for the Winwing Orion 2 or something
BWinwing also have a slightly less expensive force sensing base as well, but it handles it selves a little bit different than the realsim setup, granted almost half the price.
I own the winwing orion 2 and f16 throttle myself and find that great value for the viper.
I own the winwing orion 2 and f16 throttle myself and find that great value for the viper.
MIt's still not cheap haha
MMight be saving for awhile
EHi, I tried to check from FAQ but didn't have an answer. So my question is related to production amount/capacity. As we see from previous shipped Rhino the median waiting time is 218. With the current rate of Rhinos produced during little over month or so my estimated waiting time is little over one year. So the question is, are there any plans put in place to increase the production?
MIf I'm looking for budget should I do the X56 as is cheap and I'm going to use mainly VR?
BThis is not a general HOTAS discord, it is solely for the VPRhino and DIY projects around the kits etc.
Other discussion servers will likely help you better.
Other discussion servers will likely help you better.
MApologies
Fbetter ask in a discord that is dedicated to the game you are planning to play in VR. like DCS discord etc.
they usually can recommend stuff.
they usually can recommend stuff.