I dont know the resolution of the vr1, but 3080 might be more capable than you think. Im running pic

I dont know the resolution of the vr1, but 3080 might be more capable than you think. Im running pico 4 at 3120x3120 in dcs vr cause of compression (more pixels=better image) and i get ~60fps in the air, 40 on the ground with a 3090

Jon (Bounty_V)•10/9/23, 1:13 PM

dual 2880 x 2880 screens

Fierce_FireOP•10/9/23, 1:13 PM

And I recently found out my 12600k is bottlenecking it, gpubusy was 13~15ms, actual frametime ~18 if that says anything to you

Jon (Bounty_V)•10/9/23, 1:14 PM

https://somniumspace.com/

Somnium Space

A World Beyond Reality

FFierce_Fire I dont know the resolution of the vr1, but 3080 might be more capable than you t...

Fierce_FireOP•10/9/23, 1:14 PM

This is dual 3120x3120 btw

Jon (Bounty_V)•10/9/23, 1:15 PM

They've not announced pricing yet, but its expected to be pretty expensive for highest end (possibly Apple Vision Pro pricing)

Fierce_FireOP•10/9/23, 1:15 PM

That is quite the price then

Jon (Bounty_V)•10/9/23, 1:16 PM

Anyway, I don't have money lying around anyway, which is why Somnium is hypothetical purchase for me

Fierce_FireOP•10/9/23, 1:16 PM

Fair enough

Jon (Bounty_V)•10/9/23, 1:18 PM

I won't be getting a new headset until after I upgrade my PC, which will probably turn into building a new PC. I'm on a 5950x right now but its broken and I have to run it on manual clocks which loses me a lot of performance I would otherwise get from having PBO etc. enabled. Works well enough for the basic stuff I do, and not much point in replacing the CPU, nor upgrading to latest since new stuff will be out soon enough. Not upgrading GPU until new Nvidia stuff is out which is probably 2 years out.

So by time new GPUs are out there will be at least 1 new generation of CPUs out I could upgrade to and build a whole new rig.

VPforceBot•10/9/23, 1:21 PM

:package:

RHINO #0209 Has Shipped!

JJon (Bounty_V)dual 2880 x 2880 screens

Bob Bushman•10/9/23, 1:33 PM

And those would need 50% supersampling on top. DFR and dlss will finally help, but to a somewhat unknown degree.

JJon (Bounty_V)https://somniumspace.com/

Fr4Ged•10/9/23, 1:53 PM

is this some kind of "if you have to ask for the price you can't afford it" deals?

FFr4Ged is this some kind of "if you have to ask for the price you can't afford it" deal...

Jon (Bounty_V)•10/9/23, 1:54 PM

? Just look at their twitter feed. Isn't even up for pre order yet. Just reservations. Isn't close enough to release yet.

Fr4Ged•10/9/23, 1:55 PM

sure but you should at least know the range of the costs before you reserve a spot imo

Jon (Bounty_V)•10/9/23, 1:56 PM

Literally no money down. No obligation to anything.

Jon (Bounty_V)•10/9/23, 1:57 PM

they're first and foremost a VR social platform

Jon (Bounty_V)•10/9/23, 1:57 PM

Also, the headset itself is open source 3d printed. You can buy just the important bits from them, such as pcb, lenses etc. pre built, and print the rest yourself

Jon (Bounty_V)•10/9/23, 1:58 PM

The reservations are for fully finished kits.

blave549•10/9/23, 5:54 PM

I am runnning my apparently obsolete Reverb G2 on an RTX2060 Super, if you can believe it. Most of the time it's fine in MSFS with medium settings, and DCS is no problem (but then I don't do multiplayer much so that probably makes a difference).

Lassekongo•10/9/23, 8:18 PM

Is there any channel or wiki here that contain recomended settings per dcs aircraft module ?

FlatSpin•10/9/23, 8:26 PM

knowledge-base?

Poor Yurik•10/10/23, 2:44 AM

Am I correct in my interpretation of the official Rhino diagram pdf that the dimensions of a mounting plate that would fit perfectly under the unit would be 180mm x 180.32mm?

Bblave549 I am runnning my apparently obsolete Reverb G2 on an RTX2060 Super, if you can b...

Ophelia•10/10/23, 4:03 AM

TIL my headset is "obsolete"

VPforceBot•10/10/23, 6:31 AM

:package:

RHINO #0212 Has Shipped!

VPforceBot•10/10/23, 7:41 AM

:package:

RHINO #0213 Has Shipped!

OOphelia TIL my headset is "obsolete"

dco0l•10/10/23, 11:05 AM

Once you get the FOV mod I'd say it's still pretty much one of the best. The clarity on the Reverb is just superb. I've seen some comparisons to some Pico headsets that have a higher resolution but the clarity is quite a bit worse so you don't gain anything and you'd lose some FPS

GeezAlbert•10/10/23, 8:19 PM

!status

GGeezAlbert !status

VPforceBot•10/10/23, 8:19 PM

Hey @geezalbert,
So the last Shipped RHINO is #0212 on 2023-10-10
Average waiting time from preorder to shipped is 206 days, median is 219 days, max is 292 days
211 Rhinos are shipped in total

PPoor Yurik Am I correct in my interpretation of the official Rhino diagram pdf that the dim...

walmis•10/11/23, 9:36 AM

Yep, that's correct

VPforceBot•10/11/23, 9:44 AM

:package:

RHINO #0214 Has Shipped!

GeezAlbert•10/11/23, 7:49 PM

!status

GGeezAlbert !status

VPforceBot•10/11/23, 7:49 PM

Hey @geezalbert,
So the last Shipped RHINO is #0214 on 2023-10-11
Average waiting time from preorder to shipped is 206 days, median is 220 days, max is 292 days
212 Rhinos are shipped in total

GeezAlbert•10/11/23, 7:53 PM

Hello I’m wondering if anybody is selling their design using the diy motor kit

GGeezAlbert Hello I’m wondering if anybody is selling their design using the diy motor kit

PiNKSH!T•10/12/23, 3:13 AM

Hey m8 I can't say for sure but I haven't seen anyone asking money for the diy design plans/files, though I think ppl were working on offering diy kits to go with the motor kits from vpforce. Check out #

showcase & #

diy-builds for the ppl that have made their own & ask if they have plans/files.

VPforceBot•10/12/23, 8:34 AM

:package:

RHINO #0215 Has Shipped!

VPforceBot•10/12/23, 9:04 AM

:package:

RHINO #0216 Has Shipped!

PPiNKSH!T Hey m8 I can't say for sure but I haven't seen anyone asking money for the diy d...

GeezAlbert•10/12/23, 11:42 AM

Thanks man

VVPforceBot :package: 🇳🇿 **RHINO #0216** Has Shipped!

TrigaNZ•10/12/23, 6:01 PM

Another Kiwi !

RReed Click to see attachment

Fierce_FireOP•10/12/23, 6:23 PM

What is that extention made of? Is it a custom or a readily available part?

Fierce_FireOP•10/12/23, 6:35 PM

@walmis I read that the VKB adapter has 6 set screws to connect it to a DIY extension solution, is this correct and if so, where would they be located? And also, if one were to use tubes to mount the adapter, what would be a recommended inner diameter for these? Thanks.

FFierce_Fire What is that extention made of? Is it a custom or a readily available part?

Reed•10/12/23, 7:57 PM

from ebay. its al.

Fierce_FireOP•10/12/23, 7:57 PM

Any idea what it might be called?

Fierce_FireOP•10/12/23, 7:58 PM

Hmm I think i found it

Fierce_FireOP•10/12/23, 7:58 PM

thank you

GGeezAlbert Hello I’m wondering if anybody is selling their design using the diy motor kit

N7783L•10/12/23, 8:10 PM

What @PiNKMuD said but there are designs pinned in this Discord in the diy-builds channel. Links to the necessary files point to Github repositories. There you can find the link to pull it all down as a zip file.

@Subsonic (Protomaker) posted this one: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed/tree/main

And @Number481 posted this about adding force feedback to pedals: https://github.com/Number481/VirpilACE-VPForce-Mod

@Subsonic (Protomaker) - How is your 3D printed version holding up? Nice looking work!

GitHub

GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, ...

3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, parts...

GitHub

GitHub - Number481/VirpilACE-VPForce-Mod: DIY VPForce 86BLF-03 kit ...

DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals - GitHub - Number481/VirpilACE-VPForce-Mod: DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals

NN7783L What @PiNKMuD said but there are designs pinned in this Discord in the diy-build...

GeezAlbert•10/12/23, 8:10 PM

thanks! very kind of you

N7783L•10/12/23, 8:14 PM

The one Subsonic posted looks exactly like the full Rhino but I haven’t really dug into it yet.

GeezAlbert•10/12/23, 8:20 PM

ill have a look

NN7783L What @PiNKMuD said but there are designs pinned in this Discord in the diy-build...

Subsonic•10/12/23, 9:23 PM

3d Printed unit is holding up just fine. No creaks or tweaks.
Use Carbon PETG for the gimbal and stick assembly and should work fine and last a long time.

NN7783L The one Subsonic posted looks exactly like the full Rhino but I haven’t really d...

Subsonic•10/12/23, 9:24 PM

It is essentially, with a few minor differences such as the gimbal/stick and fan locations.

I dont know the resolution of the vr1, but 3080 might be more capable than you think. Im running pic

Similar Threads