hey guys just found out about the Rhino FFB stick. looks good
hey guys just found out about the Rhino FFB stick. looks good
FI owned the MS Sidewinder FFB for many years.
LDoes the vp rhino softwere get data like this irl chart for example from DCS to set damper,inertia and movement limits per module or is this something that would need to be self researched by the user ?
Ait's mostly up to the module makers and as you might expect, the quality varies a lot
Adon't expect anything too elaborate on the average
AThen there's the TelemFFB thing where stuff like this could be added
AThe software on the Rhino (including the TelemFFB thing) is developing pretty fast
DIt's so good you wont know until you try it. Imagine MS Sidewinder 2 FFB on steroids. It'll just about rip your arm off if you want with the sensitivity of so many more factors than even what these simulations provide in FFB ex IL2 only provides like 3 different FFB. This thing is insanely customizable. Look at all the different effects in the community config.ini that you can adjust and set. Its mind boggling once you get it. https://github.com/walmis/VPforce-TelemFFB/blob/wip/config.ini
GitHub
DCS FFB Telemetry Effects (for VPforce FFB). Contribute to walmis/VPforce-TelemFFB development by creating an account on GitHub.
F@subsonic1748 I think DCS only sets the spring per module. Damper, inertia etc has to be done by the user.
AWould you recommend to use rhino with an 20cm extension, 10cm extension or no extension at all?
AMostly the extension should be whatever best suits your setup, but the longer your stick is, the more stress you put on the motors for lesser maximum strength
Aalso do note that the rhino basically comes with a built-in extension and is very tall compared to most bases, so it's probably going to require less extending compared to whatever you've been using so far
Fhttps://discord.com/channels/965234441511383080/972180323787997255/1156159023649931274 a comparison with a more standard base
Fnote that the rotational axis is around the middle of the large pulley
FWith a 5cm extension I get a realistic Y axis throw distance. With a 70% limiter in the X axis it's great. Plenty of power too. If you use a longer extension you will also need to limit the throw angle.
LGot it 
Whats the diff between rhino softwere and telem ?
Whats the diff between rhino softwere and telem ?
MRhino software for working with DirectInput native ff from game. Telemetry derives ff signals from craft telemetry so you can have ff where devs don’t specifically support it
FBasically to get the most of you Rhino you will use the configurator to customize your settings and telem to add more effects than what the game natively gives you.
IIs there a general location to see the step files for the vp rhino base?
Athis isn't true -- games can set effects like damper/friction/periodic effects. It's just that most don't out of the box so we rely on telemffb
Athe DCS F14 module for example does actually quite a good job out of the box, the only thing it really lacks is like engine vibrations and what not
NYea this thing is a beast. Went from a msffb with the resistor mod (power doubles) with a modded stick grip to the rhino. I thought the rhino would be twice the power in reality its about 5-10 times better than the modded one I had and at most half a millimetre of play at the top of my grip I have on it. Tldr if you can afford one get it.
NSince I know everyone doesn't immediately read every new post in every channel in this discord 
...
New build of TelemFFB with goodies for MSFS and DCS: https://discord.com/channels/965234441511383080/1093558100713279508/1173264900324343909
...New build of TelemFFB with goodies for MSFS and DCS: https://discord.com/channels/965234441511383080/1093558100713279508/1173264900324343909
MSolid work on that. Now us non-3D print/full DIY workshop folks just need Walmis to release that teased MFG conversion kit haha
JReally want a TPR conversion kit
HI'm primarily DCS so not sure how much use the TPR mod would be, but I'd still jump on it
LActive side sticks potentially coming to airbus. Basically a suped up force feedback stick: https://www.youtube.com/watch?v=HpVROzJQynw
YouTubeMentour Now!
Visit our sponsor https://betterhelp.com/mentournow today to receive 10% off your first month of therapy
-----------------------------------------------------
We all know that Boeing aircraft have yokes and Airbuses have sidesticks. But could Airbus be about to change the sidesticks that they are using on their aircraft? Why would they do that,...
-----------------------------------------------------
We all know that Boeing aircraft have yokes and Airbuses have sidesticks. But could Airbus be about to change the sidesticks that they are using on their aircraft? Why would they do that,...
Asomeone check the bot if the number of rhinos ordered is now in five figures
CHave any of you tried the Rhino as a side stick for F16/Space games? Is it easy to switch configs between a shorter throw side stick and long throw center stick? Like, with the Rhino software?
DLike rhino with elite dangerous?
DIm curious to try it, not sure what FFB should be like
BI'm not even sure you can get decent telemetry from elite so I would expect it to work like a very tuneable joystick.
FI'd assume telemffb would allow the joystick to work as a normal spring/friction based joystick
Band that would be the absolute worst case scenario. It will absolutely work like an excellent stick at minimum.
V:package: 
RHINO #0248 Has Shipped!
RHINO #0248 Has Shipped!
SOnly 480 more till i get mine 
CYeah I wouldn’t expect any FFB, but I don’t like long throw extensions for space games. I’m have to try it and see if there is a way to switch configs with the software end stops
Nyou can export as many different configurator setups as you want and load them manually in the configurator or you can load them programmatically by passing
-config path/to/config.vpconf to the exe
OIt goes fast. I wasn’t expecting mine until next year, but so many folks dropped out of the queue that mine came up MUCH faster than I expected.
BI moved up about 70 spots but it's been a few months since its stabilised. And by my guess, maybe next June.
BThrew my name in late May.
A
my tracking code still only reads "Order data transmitted electronically." 
WOnce it starts tracking you will receive it the next day 
AAh, so it's just the final leg!
AMy Virpil order also arrives in time with the Z extension. 
FYou will definitely benefit from the balance spring calibration once you get it.
V:package: RHINO #0249 Has Shipped!
RHINO #0249 Has Shipped!OC’moooooon 254, my wife is going to be SO excited to gift this to me for Christmas!
JBalance spring?
