damnit... (my bad).. delete this from your config (both default and user if it exists in there)..
damnit... (my bad).. delete this from your config (both default and user if it exists in there).. this is conflicting with the ESE...
NI'll need to push an update to fix that permanently
Mtrying without that
Mstill didn't work
Nhmm.. not sure what to say... after deleting the erroneous part of the config per above, it works fine for me.
Nlook at your log again and make sure it is not still overwriting the read config from another section.. this is what your previous log said
The bad [F-15E] section was overwriting what you had in the [F-15ESE] section
The bad [F-15E] section was overwriting what you had in the [F-15ESE] section
MI'll check the most recent log
Nthat looks normal... its finding your configurator install and its picking up on the vpconf setting... cant say why its not working....
What happens if you do this from a windows command prompt?
What happens if you do this from a windows command prompt?
"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"MThe first one opened VPForce Configurator
MThe 2nd one threw a windows "how do you want to open this"
Nyou need to run it all as one command
MThat does nothing, doesn't throw an error
MDoesn't even reopen configurator when I do them both together
Nits not supposed to.. thats how you programaticaly load the profiles. That is exactly what TelemFFB does.. so it looks like the problem is not with TelemFFB
Ntry this too, and make sure it returns the right path to your configurator install..
reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /sexportPath REG_SZ C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1/configs
Nbut that shouldn't matter here since its not working straight on the command prompt either
MThat's right'
Nand if you actually cd to
C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconfand what if you import F-15E.vpfconf manually inside Configurator?
MNothing for the cd, and manually importing works
MIs there a setting or something in configurator that needs to be checked to allow an external profile switch/import?
Nbest last idea I've got before I have to turn you over to @walmis for help is to try loading this config, which I know %100 works (you can re-load from the device in configurator as long as you dont press the store button first).
Mwhat am I doing with that file?
Nput it in your configs folder and try loading it the same way you have been trying your F-15E.vpconf?
NVPforce_FFB_Configurator.exe -config .\configs\tst.vpconfMIt didn't beep or anything
Ndid any of the settings change if you open configurator? the master gain would be at zero if it was sucessful
Nactually.. delete that file.. you don't want to load it...
Mnope. it's still on my default profile
Nok.. something else is up then and you'll have to work with walmis to figure it out... the configurator piece isn't something I have any visibility into for troubleshooting
MCopy, thanks for trying
W@.mashed.potato. you don't have the beeper disabled by any chance ?
MNo sir, when manually swapping profiles, the beep happens
WTrying this on my end, gives me the beeps
WDoes the web interface work ok https://vpforcecontrols.com/usb/rhino/ ? i.e. shows axis and button information and firmware version
MNope, that's not showing anything
MIt says device connected, but does not show device firmware or axis movement
Mtried it, restarted, still not showing up on the web tool
WAnother way to try is to unplug the Rhino and use https://www.nirsoft.net/utils/usb_devices_view.html utility to uninstall all instances of the Rhino device with VendorID: FFFF via the right click menu
NirSoft
USBDeview is a software that lists all USB devices that connected to your computer, and allows you disable, enable or uninstall them.
MThat made the device not even show up in the webusb until I restarted, after restart, still no firmware displayed or axis output
WTry the hack now
Mstill nothing in the portal
Wdamn, interesting. Which windows btw? 10, 11 ?
M11
3Help!
3Motor fault encoder Magnet, Y
3Reser now works
Ris there a way to use the pot as an axis? I only see the pots being able to mapped to gain and trim functions.