Ended up just being me completely misunderstanding the intended behavior of a helicopter's cyclic. @

Ended up just being me completely misunderstanding the intended behavior of a helicopter's cyclic. @Number481 fully explained it above. I'm all set now and loving it now that I'm not fighting how it works based on my former pre-ffb understanding of what to expect.

PPoor Yurik Ended up just being me completely misunderstanding the intended behavior of a he...

Reed•11/20/23, 3:52 AM

Excellent

silverphinex•11/20/23, 6:22 AM

I know it's a low priority but is there a way to get the RGB on the virpil constellation prime lit up with the rhino

356thFS_Piranha•11/20/23, 6:47 AM

After doing the auto calibrate my stick wants to settle far forward when playing IL2 and the only way I can bring it to center is to adjust the FFB X and Y axes. Can anyone tell me why or how to adjust it to center by using the auto calibrate or is this normal behavior?

3356thFS_Piranha After doing the auto calibrate my stick wants to settle far forward when playing...

PiNKSH!T•11/20/23, 6:48 AM

sry does the stick rest forward when the plane is 'cold & dark'

PiNKSH!T•11/20/23, 6:48 AM

but move to center when you start up & throttle a bit?

Ssilverphinex I know it's a low priority but is there a way to get the RGB on the virpil const...

amadeus•11/20/23, 8:40 AM

Currently RGB isn’t supported at the moment, it’s mostly dependent on Walmis reverse engineering an existing Virpil base

3356thFS_Piranha After doing the auto calibrate my stick wants to settle far forward when playing...

walmis•11/20/23, 9:29 AM

Are you using an asymetrical throw limiter?

356thFS_Piranha•11/20/23, 5:01 PM

The stick is loose when plan is cold and dark., but when the plane starts it settles forward of center when straight and level flight. After I adjusted the X and Y axes its close to center. Without the game running and the axes adjusted manually and with the stick on it settles just aft of center. It's game related. I only have tried it in IL2, so I don't know if it's the same for other games. I have no idea what a asymetrical throw limiter is so I don't think I'm using one.

356thFS_Piranha•11/20/23, 5:16 PM

Also when I switch to auto pilot and have auto calibrated the stick moves to the center position and when i take it out of auto pilot it again moves forward and the planes nose drops.

3356thFS_Piranha The stick is loose when plan is cold and dark., but when the plane starts it set...

Number481•11/20/23, 5:26 PM

Which aircraft in IL-2 and, is this with or without TelemFFB? I noticed, while writing the telemetry module for TelemFFB, that IL-2 tends to do some really weird things with FFB in some of the aircraft

356thFS_Piranha•11/20/23, 7:02 PM

It's with all the aircraft. Not using TelemFFB

Sleepy81•11/20/23, 10:13 PM

My order number is coming up!

i have gotten the email asking me to fill in the Google form, where I ordered the Rhino, and I have chosen PayPal as payment but have not received any message to pay yet. Does that usually take a while?

3356thFS_Piranha After doing the auto calibrate my stick wants to settle far forward when playing...

Number481•11/21/23, 1:41 AM

Just to let you know, you aren't crazy. Just verified I see the same thing with IL-2. I do not recall it doing this the last time I fired it up... suggest you submit a bug report to IL-2, if such a mechanism exists on their forums.

356thFS_Piranha•11/21/23, 5:04 AM

OK,

356thFS_Piranha•11/21/23, 5:05 AM

I have a squad mate who has the VP Force but he doesn't seeo this behavior in IL2.

356thFS_Piranha•11/21/23, 5:05 AM

It's strange.

356thFS_Piranha•11/24/23, 7:12 AM

Should you or can you use both the VP configurator and windows game controller to calibrate the joystick?

Scotia•11/24/23, 8:13 AM

I need to put in an order for a replacement vkb adapter. How do I do that?

3356thFS_Piranha Should you or can you use both the VP configurator and windows game controller t...

amadeus•11/24/23, 8:24 AM

With the rhino, never use the windows game controller calibrator

slowmover•11/24/23, 3:49 PM

why this windows stays all time open here? i can not click X

Number481•11/24/23, 3:50 PM

because microsoft edge is a cancer

Number481•11/24/23, 3:52 PM

you can try disabling it in the edge settings.. but its %50/50 whether it honors that setting or not, in my experience...

slowmover•11/24/23, 3:54 PM

thanks mate

356thFS_Piranha•11/24/23, 4:19 PM

Thanks

Minimanzack•11/24/23, 4:51 PM

I just hooked up my Rhino to a winwing F18 stick using the winwing adapter. All buttons work except the trim hat. That is; the button works but right/left/up/down does not register. Any ideas? Thanks in advance

MMinimanzack I just hooked up my Rhino to a winwing F18 stick using the winwing adapter. All ...

Mr. S•11/24/23, 5:08 PM

check those settings in the FFB configurator software?

Minimanzack•11/24/23, 5:17 PM

Thanks! I now saw that I hadnt changed the grip type. Changed it to winwing adapter and all works flawless! Thanks @mr.s4232

I/JG7_Moto•11/25/23, 1:19 AM

Mine just shipped, is there a tutorial on how to setup the FFB Rhino?

FlatSpin•11/25/23, 2:12 AM

knowledge-base manual

I/JG7_Moto•11/25/23, 5:11 AM

Thanks

legobirds•11/25/23, 8:10 AM

Does any know how to make winwing adapter works for rhino? I have selected the winwing adapter in grip type

legobirds•11/25/23, 8:10 AM

legobirds•11/25/23, 8:11 AM

None of the buttons worked, no reaction

Llegobirds Click to see attachment

Mr. S•11/25/23, 10:41 AM

Sorry for the obvious question, but did you apply/store the profile?

NNumber481 you can try disabling it in the edge settings.. but its %50/50 whether it honors...

Jehly•11/25/23, 9:20 PM

This, did not work.

Number481•11/25/23, 9:31 PM

Microsoft.com/support?

Number481•11/25/23, 9:31 PM

1-800-EXORCIST

Jehly•11/25/23, 11:27 PM

Ha! Might as well...

NNumber481 you can try disabling it in the edge settings.. but its %50/50 whether it honors...

slowmover•11/26/23, 3:26 PM

yeap it did not nothing....

f15sim•11/27/23, 12:20 AM

Is there a wiring diagram available for the FFB kits? I finally opened the box I got a couple of months ago, and there's no docs in there at all.

FlatSpin•11/27/23, 12:32 AM

f15sim•11/27/23, 2:49 AM

Perfect @.flatspin, thank you!

f15sim•11/27/23, 2:53 AM

24v acceptable if I can't source a 20v supply?

FlatSpin•11/27/23, 3:01 AM

I think Walmis recommends the 24v 350W meanwell

FlatSpin•11/27/23, 3:01 AM

This one: https://www.amazon.com/LRS-350-24-Switching-Supply-350-4W-115Vac/dp/B07RF38JXK

Mean Well LRS-350-24 Switching Power Supply 350.4W 24V 14.6A 115Vac...

350.4W 24V 14.6A Single Output Switchable Power Supply 24 Volts @ 14.6 Amps

f15sim•11/27/23, 3:07 AM

Got it, thanks.

Sundown•11/27/23, 5:24 AM

Does anyone know if the VKB-to-Rhino adapter will work for the new Mk 4 grips/button box? If not, is there a Mk 4 adapter or will there be one on the way?

FlatSpin•11/27/23, 6:16 AM

I don't believe so.

Llegobirds Click to see attachment

�

𝔐𝔬𝔯𝔭𝔥𝔦𝔫𝔢 💀•11/27/23, 5:23 PM

Ultimately, I was not able to get my WinWing F-16 stick working with firmware version 1.0.16 (it worked with 1.0.15) despite the debug saying the adapter was fine. I switched to the Virpil Alpha grip.

Raick•11/28/23, 4:21 PM

Hey guys, good morning! The vkb ultimate grip mkv works on rhino?

Ended up just being me completely misunderstanding the intended behavior of a helicopter's cyclic. @

Similar Threads