ok amazing thank you - and yeah, I'll try and give it a look this weekend - if I get it working I'll
ok amazing thank you - and yeah, I'll try and give it a look this weekend - if I get it working I'll let you know as soon as I can 
RYeah even like this I’m getting FFF
WYou can test the internal connections by probing with a multimeter in diode test mode: put the positive(red) probe on GND go through other pins with the negative(black) one. It should read a diode (~0.5-0.7V) on all pins, otherwise it would indicate a broken internal connection.
Rha, well, only the VDD is reporting 0.62V - all the other ones don't seem to register at all - not even 0.0V
Rand ehhh yeah... no obvious soldering problems so I don't think I'm going to be able to fix it myself - wouldn't have guessed there was a whole circuit board in there! 
II downloaded the latest WIP from Nov 30th, it worked fine, the program did not install a virus.
There is a link in the window that says get help.
Virus got installed when I clicked on it.
There is a link in the window that says get help.
Virus got installed when I clicked on it.
IWhat it does it opens browsers in all of them with get help pages non stop.
IThat get help link its on the lower left hand corner.
WI don't recall any "get help" links anywhere in our apps.
II am still trying to fix the virus in my PC , its the latest WIP file from Nov 30th
WThis doesn't make sense
IAre you using that version of Telem FFB?
IIt had blue letters on lower left corner that said get help
NThe last version of TelemFFB was built on November 24th
Nno such text exists in TelemFFB... Are you talking about the documentation link?
INo its the window when I am playing DCS and tells the plane I am flying and all the info for the effects
I
IThat is the version I downloaded yesterday
N11/30 is the date you downloaded it.. not the date it was built.
But I am telling you , there is no "Get Help" button anywhere in TelemFFB. The only blue button anywhere in the lower left corner of TelemFFB is the documentation link I screenshotted above... all that does is open a browser to the google docs version of the documentation...
But I am telling you , there is no "Get Help" button anywhere in TelemFFB. The only blue button anywhere in the lower left corner of TelemFFB is the documentation link I screenshotted above... all that does is open a browser to the google docs version of the documentation...
Nthat right there is the entirety of what that link does
IWill try again once I fix my PC
IBy the way I was able to fly a warbird in DCS for like 15 minutes and I am very impressed with the Rhino, the realism is amazing , I fly a warbird in real life , and Rhino felt very real.
NNow I'm jealous...
NHopefully not a distraction but if a link to a virus is appearing, it could be embedded at or before the server, but the code could also be being injected at the client by an infected system trying to establish or re-establish connection to its master. If anyone else is seeing the link it would argue for server-side. But if nobody else is seeing it, it could be either injected along the way or some level of infection was already present on the client system even if antivirus software doesn’t see it.
WAlso could be a rogue chrome/edge extension injecting malicious code
BHow can I tell if I am on the pre order list...I submitted the request but the responding email said " thanks for filling out the pre order request...enter your details here" but there is no link to enter details.???
B
RYou can direct message @VPforceBot with the message:
!info youremail@email.com
!info youremail@email.com
Tdoes the winwing f16ex work with all buttons axis, and shaker while remaing recognizable to the ww software on the rhino?
Fhello hope someone can help me since yesterday mi rhino starts to pitch forward and random times and doesnt give signals to DCS, when i restart the mission everything is fine but again at random times same behavior, VPC software sends this message
F
Fwell it says FFB_RemoveEffect[11]
ISolved the problem, NO virus, a Function key was stuck in a controller , and happened just at the moment I was in the program, embarrassing but I better tell you guys to not worry about viruses in the program.
NGlad to hear you got it sorted and that it wasn't related to any malware in TelemFFB or on your system!
P@walmis hey m8, sry for the ping, when you get time could you have a look at the log for me. I've been getting x axis instability in the dcs f18 with Telem app, usually on takeoff & landings (both carrier & field) the x axis will 'rumble' with some sort of effect then the motor will cut out & I hear some beeping tone from the base, I then need to use the emergency stop on/off then the axis is back. This also happened on a long approach on a carrier landing last night, that time I could feel a few slight 'clicks' or 'bumps' in the stick before it happened. I'm thinking I likely have one of the settings wrong when I copied over old configs. Thanks for you help & time & again sry to ping I can post here or dm the log's .cvs file
II pressed reset in the config tool and now my aileron axes are reversed, how do I get them back to normal?
WI think you had this before, maybe your filter settings got restored to the old ones?
WThe reset also resets the calibration data - you need to run the "auto calibrate" and move both axes to their extents and click invert on the x axis.
To restore the stock config - import settings file from
To restore the stock config - import settings file from
configs/Rhino-defaults.vpconf
PHave I stuffed something up on here?
WAh, I see your periodic slider is very high, that could cause a bit of interference. TelemFFB recommends value of 50%
Poh thanks, I think that was supposed to be for IL2 only??
P*sry I mean having it high for IL2
WTelemFFB is developed with 50% as a default, so with slider at 100% the rumble effects will be too harsh
Pah cool, thanks I've changed that now to 50%. What about when not using telemFFB eg. playing IL2?
WSet it to your preference
WAlso if you really want high rumbles, you can lower the Periodic LPF - to 15-10Hz to keep it from going to failsafe
Poh nice, I might test it out, have a bit of a play with the slider & the LPF between 10 - 15Hz
IThanks , got it, I downloaded and installed Telem FFB, want to try Telem FFB WIP latest, how do I uninstall Telem FFB?
Nyou don't need to uninstall anything. You can just extract the new zip over top of the older TelemFFB location. Note that the very latest version has a built-in auto updater, so going forward there will no longer be a need to manually download and unzip the new versions (there have not yet been any new versions since the self updating was added)
II think I screwed something up, extracted wip version on top of the other version and now Telem FFB does not start