Ncan you send me a screenshot of the TelemFFB window with the 'effects monitor' option selected when it is not working? Also if you could drop the log file in here too that might help.
NI think I may have figured out whats wrong... at least its the only thing that would explain what you are seeing... in the command line,
-t pedals needs to be all lowercase. -t Pedals will not work. An oversight for sure (and a simple fix in the next version).
P@jehlybean I sent 8020 an email this morning directly to the rep I dealt with last time and didn't get a response yet (they may have been off today, because typically the responses have been very quick). I'll follow up with their main number tomorrow by phone.
AGot it working. I used <pedals> (with the parenthesis, as shown in the manual). Which starts Telem in pedals mode with no problem, but obviously causes problems. Leaving the < > away, solved the problem. Thank you for your help.
RSorry, is there any tracking for this please? Just want to make sure I don’t miss any import charges and I’ve not had any update emails or anything…
BLargely in my experience the shipping company prepays any import/vat fees to expedite the handling shipping, the bill for this has come for me a few different ways, it can be added in with the shipping labels, come few days later in the mail, or lately an electronic bill just sent straight to my bank.
RJust me worrying 
Had the Rhino base sitting on my desk for a week but I’m not able to use it without a working winwing adapter (this tracking is for the replacement walmis is shipping) - so eager to make sure it’s not delayed for no reason 
Had the Rhino base sitting on my desk for a week but I’m not able to use it without a working winwing adapter (this tracking is for the replacement walmis is shipping) - so eager to make sure it’s not delayed for no reason 
RTracking received from walmis via DM. Thank you again!
B
CJust to verify, the Vkb adapter is for mkIII grips.
MCorrect
MWalmis has not yet released a MKIV adapter, as afaik, he does not have a MKIV grip on hand
CThanks! I was worried for a second that I needed to order the mkIV upgrade kit.
RHmmm... How do you assign buttons as hats when using shift register boards (generic grip or VPForce shift register board profiles)?
LAfter calibrating my stick and sending the settings to the device, the stick doesn't center. It's reading -24 in x and 166 in y. This is with Spring force enabled at 100% in both screens. How do I get these to zero out? It's resulting in a slight nose up input in DCS that I'm having to fight constantly.
LI imagine it has something to do with the assymetrical physical stops I've installed on the base to mimic the range of the F/A-18 stick
LBut what I don't understand is why the FFB isn't driving the stick to the zero position anyway
LTurning adaptive recentering will hold it in the center position if I move it there and let go, otherwise it oscillates around center at about 4Hz
LSetting the Spring Force LPF to 25Hz (Max) helps reduce the amplitude of the oscillation, but doesn't eliminate it
LOk, Adaptive Recentering + about 30% Damping and Inertia has sorted it. I don't love the feeling of the adaptive recentering though
LDefinitely going to have to do more tweaking. Hooking up to the tanker was not easy :S
LAnyone have settings they can share that makes for good "finger flying"?
WWhat grip/extension are you using? Sounds like it could be a balancing issue.
TGuys, does DCS have its own spring strength? It seems like I dial in my setting in the configurator and save it. But when I start flying a module in DCS, it feels -5% to -10% lighter with regards to spring strength.
LThanks walmis! I’m using a TM Hornet grip with the VPC 200mm Flightstick Extension so that would make sense.
LI believe so Tinman. You could try checking off “Sticky” in the configurator for Spring Force. I’m not sure if that overrides only the spring effect in DCS or all effects generated by TelemFFB though.
Ngood practice to tune the balance force settings first, so that your stick more or less stays where you put it, even with no spring force enabled... then the adaptive centering will have to work a lot less to fully center the stick and you won't feel it as much or at all...
See this post for a general how-to.. 🧰support
See this post for a general how-to.. 🧰support
LMuch appreciated! I’ll experiment with that tonight. I swear I did RTFM cover to cover 
TYeah thats what I was afraid of. But I will try. TY
NThat is the nature of FFB. DCS has native FFB support and each module has its own unique implementation.
If you enable sticky spring, you will lose the entire dynamic aspect of FFB (if the aircraft has such, aka non-FBW) including trim movement.
Don’t try to set up the rhino for a specific aircraft outside of the sim. Do it while the sim is running and you are loaded in the aircraft.
As a simplified explanation, if DCS says “set %85 spring strength”, that %85 is not related to the maximum force your joystick can output, it is related to the maximum force you have configured in vpf configurator.
So if you had your slider at %50, and DCS said “set %85”, that actually results in %85 of %50.
If you enable sticky spring, you will lose the entire dynamic aspect of FFB (if the aircraft has such, aka non-FBW) including trim movement.
Don’t try to set up the rhino for a specific aircraft outside of the sim. Do it while the sim is running and you are loaded in the aircraft.
As a simplified explanation, if DCS says “set %85 spring strength”, that %85 is not related to the maximum force your joystick can output, it is related to the maximum force you have configured in vpf configurator.
So if you had your slider at %50, and DCS said “set %85”, that actually results in %85 of %50.
NIf you want to go as far as having different configurator profiles for different aircraft, you can accomplish that with TelemFFB which can dynamically load profiles when you load into an aircraft.
S@walmis I just sent you a message, am I still good to go ahead and pay for my Rhino or have I lost my space? Client took ages to finally pay.
FDM?
JSuddenly got a super weird thing where my stick will connect, motors will center, then immediately disconnect. If I restart the computer, it's fine.
SHey all, not sure where to post this. I got a message from the BOT that I need to fill out a form and that I was also emailed this information. I looked in my inbox and I was unable to find anything besides my initial request a year or so ago. I have filled the form, but I still haven't gotten anything from the bot or via Email. I just want to make sure that whoever is running the orders is aware that I am still here and still interested in purchasing one. I just don't want to lose my spot in the queue after waiting all this time. Just not really sure how to go about this convoluted process. Feel free to DM me or respond here and I will respond once I see it.
Nlong time no see on the varjo discord (that place went downhill 
).. walmis will be able to confirm %100 your status.. but if you message the bot with
).. walmis will be able to confirm %100 your status.. but if you message the bot with !info <your email> and get a return with your position in line.. I think you should be good to goSDude for real.. once they lowered the price, the floodgates opened. Walmis reached out and I think we will get this all squared away. Just trying to give dude money haha
SI am also on the BSB now, my Aero is officially collecting dust. Just using it as a backup. I just can't go back.
OThe BSB is that much better than the aero? Even without eye tracking?
NI think it’s going to depend a lot on your use case. If you dont play any games that support quad views , eye tracking doesn’t buy you anything.
NIf you take away eye tracking as a benefit of the aero, the OLED panels and sheer lightweight size of the BSB sound pretty attractive.
OI pretty much only play DCS
Nthe aero (and the crystal) are arguably the best headsets available for DCS as it supports quad views.. you can get better performance and better resolution than pure stereo mode.. but its literally the only title (other than pavlov) that supports quad-views (and even then, its only fully supported with the extensions written by the openxr toolkit author)... DCS's quad-view implementation is half-assed.. like most of DCS.
SFor DCS, yes, stick with the Aero. But for everything else. I would pick the BSB everytime.
JI’ve been waiting for the big screen vr to come out
D@theshazman I've been waiting for someone like you to finally own one! How bad is it with BSB for DCS ... If you downed the resolution a bit would it make a difference? Do you have a 4090? Do you think with a 3090ti i could just lower the resolution a bit? Im really excited about that headset. Much more over Varejo. Would a 13900k or high end amd processor help the cpu part of the load? What about fixed foveated rendering with openxr? Although i think I saw that not as an option yet for open xr.
THey guys, what temps should I start to worry about the Rhino's motors?
TAlso, should I worry bout dust and pet hair clogging stuff in the base?
WYou shouldn't worry about the temps, it's self-regulating.
You can open the back anually and blow out the dust with compressed air
But it shouldn't cause any issues.
You can open the back anually and blow out the dust with compressed air
But it shouldn't cause any issues.BDidn't find any winding temps for this but intended ambient range is 50c, at which the fans are set to start.
Commonly with electrical motors max winding temp is about 125c.
For our use case that would take pulling max torque for a substantial amount of time, I'm guessing 3-5x the length of a normal dogfight without any pauses in between, if at all.
So I'm not really worried about the temps.
Commonly with electrical motors max winding temp is about 125c.
For our use case that would take pulling max torque for a substantial amount of time, I'm guessing 3-5x the length of a normal dogfight without any pauses in between, if at all.
So I'm not really worried about the temps.