For me I was completely unable to wake bluefin (GNOME) from sleep 100% of the time, and bazzite woul

For me I was completely unable to wake bluefin (GNOME) from sleep 100% of the time, and bazzite would refuse to let me past sddm like 60% of the time

puella aeternis•12/18/23, 11:46 PM

I can't seem to figure out how I'm supposed to edit my kernel cmdline? Do I just use grubby?

Ppuella aeternis I can't seem to figure out how I'm supposed to edit my kernel cmdline? Do I just...

EyeCantCU•12/18/23, 11:49 PM

rpm-ostree kargsrpm-ostree kargs can be used to add/remove kernel arguments

Ppuella aeternis I can't seem to figure out how I'm supposed to edit my kernel cmdline? Do I just...

Jilong•12/18/23, 11:51 PM

I use rpm-ostree kargs --editorrpm-ostree kargs --editor.

puella aeternis•12/18/23, 11:52 PM

Should've known it was handled by

rpm-ostree

rpm-ostree

, thanks

IIndigo Hmm sorry to hear it is still crashing. Hideous tty is indeed a consequence of s...

SummedKibbles36•12/19/23, 12:00 AM

It is the same as 535, I'm on Fedora Silverblue but I've realised a very custom system

IIndigo For me I was completely unable to wake bluefin (GNOME) from sleep 100% of the ti...

SummedKibbles36•12/19/23, 12:00 AM

GDM on my end sometimes fails to start Wayland, only Wayland

SummedKibbles36•12/19/23, 12:00 AM

And yeah lock crashes Gnome Shell for but only after the monitors fully shut off

SummedKibbles36•12/19/23, 12:01 AM

I wonder if it might be related to having a dual monitor system thonk

SummedKibbles36•12/19/23, 12:02 AM

I remember at some point not having this issue but I can't quite put my finger on it

SummedKibbles36•12/19/23, 12:04 AM

Other than these 2 things the main remaining issues I have with Gnome on Nvidia Wayland is stream freezing on direct scanout (fullscreen games) and the stream in general having a very high CPU impact also creating some sort of constant frequent stutter

SummedKibbles36•12/19/23, 12:04 AM

The correct term might be jidder but I'm not sure

puella aeternis•12/19/23, 12:05 AM

Is anyone aware of whether or not it's possible to add multiple custom modes to the same output via kernel args? Something to the tune of video=<output>:<resX>x<resY>@<refreshrate>,<sameoutput>:<resX>x<resY>@<refreshrate>video=<output>:<resX>x<resY>@<refreshrate>,<sameoutput>:<resX>x<resY>@<refreshrate>

puella aeternis•12/19/23, 12:06 AM

Kernel documentation didn't help me here

SSummedKibbles36 GDM on my end sometimes fails to start Wayland, only Wayland

IndigoOP•12/19/23, 12:30 AM

Yes, I should have specified: this was all under Wayland for me too, so at least there has been the fallback of X11

Ppuella aeternis Is anyone aware of whether or not it's possible to add multiple custom modes to ...

puella aeternis•12/19/23, 12:44 AM

this seems to work, if it's worth anything to anyone. I'm not doing any overclocking just adding resolutions that my monitor EDID lacks, despite supporting

ChaiQi•12/19/23, 2:55 AM

Since you're on @KyleGospo - I just got a new monitor and am testing out various games with 535/545. I'm having pretty horrific performance issues with specifically Dyson Sphere Program on both, with or without VRR/Freesync enabled, and different proton versions don't seem to help much. Different resolutions and refresh rates don't help, and the game seems to not be using system resources right when this monitor is plugged in, with or without another monitor. Any ideas for parts of the tech stack I haven't tested, or things which just aren't there yet upstream which could be causing this?

ChaiQi•12/19/23, 3:12 AM

Also: the system copy of Prompt is working now

CChaiQi Since you're on @KyleGospo - I just got a new monitor and am testing out various...

Kyle Gospo•12/19/23, 3:31 AM

That's very strange, I'm afraid I have no idea where to even start on that one

CChaiQi Also: the system copy of Prompt is working now

Kyle Gospo•12/19/23, 3:32 AM

That I'm glad to hear, it's like we thanks to us building it against stable GNOME rather than the nightly flatpaks

KKyle Gospo That I'm glad to hear, it's like we thanks to us building it against stable GNOM...

ChaiQi•12/19/23, 3:33 AM

Gotcha

KKyle Gospo That's very strange, I'm afraid I have no idea where to even start on that one

ChaiQi•12/19/23, 3:33 AM

Alright, I'll keep looking into it

Bartley•12/19/23, 6:08 AM

Anybody have issues with fullscreen games on bazzite gnome? They lag like crazy until you make them windowed. I've had this issue with Civ 6 as well as Red Dead Redemption 2.

Bartley•12/19/23, 7:09 AM

It's really frustrating. If the fullscreen window isn't focused, it's perfectly fine, but as soon as I focus it becomes unplayable.

Bartley•12/19/23, 7:09 AM

Even in the gnome overview the fps smooths out nicely, but then plummets when you open the game again

Bartley•12/19/23, 7:10 AM

I might rebase back to silverblue-main and see if I still have the issue.

fiftydinar•12/19/23, 9:59 AM

@EyeCantCU I'm testing your latest changes to flatpak-setup & this is what I see.
grep command outputs nothing, with either remove or install list.

INSTALL_LIST=$(echo $FLATPAK_LIST | grep -vf - $INSTALL_LIST_FILE)
INSTALL_LIST=$(echo $FLATPAK_LIST | grep -vf $INSTALL_LIST_FILE) #it should be like this

REMOVE_LIST=$(echo $FLATPAK_LIST | grep -f - $REMOVE_LIST_FILE)
REMOVE_LIST=$(echo $FLATPAK_LIST | grep -f $REMOVE_LIST_FILE) #it should be like this

while it should output Gnome Web in Remove list (on my system).

When setup is ran, it still installs everything, but flatpak has check for installed flatpaks, so it skips it.

fiftydinar•12/19/23, 10:00 AM

I will try alternative with awk or sed

fiftydinar•12/19/23, 10:05 AM

I see the error, you added additional "-" where it's not needed.
Now with it removed, it outputs things normally

fiftydinar•12/19/23, 10:12 AM

Hmm, it still doesn't work well, now it deletes everything. I understand why
I solved the remove issue by including -o (only show matches, I would apply this to both install & remove)
but grep -vf doesn't work for some reason at all for install.
I uninstalled Calculator, but it does not appear in grep -vf for install

As far as I'm reading, grep -vf sometimes doesn't work with some piped commands. It's probably the case here with "flatpak list --columns=application"

Zelaf•12/19/23, 10:50 AM

Does Bazzite/Fedora Silverblue do anything with efibootmgr to re-add Windows on boot?

Ffiftydinar @EyeCantCU I'm testing your latest changes to flatpak-setup & this is what I see...

EyeCantCU•12/19/23, 12:19 PM

If the list is empty it falls back to the other command

EyeCantCU•12/19/23, 12:20 PM

Will update the remove list as well

EEyeCantCU If the list is empty it falls back to the other command

fiftydinar•12/19/23, 12:48 PM

yes, I solved that issue I had.

the only thing remaining I can't solve is grep -vf not working with "flatpak list --columns=application" for flatpak removal. It outputs nothing while it should.

fiftydinar•12/19/23, 12:51 PM

I originally wanted to work a bit on default-flatpaks module because currently in bling, you have to manually start flatpak-setup by deleting state version file for new changes.
With just this 1 issue remaining to be solved, I could ditch that state version file concept & enjoy in automatic update of default-flatpaks.

Ffiftydinar yes, I solved that issue I had. the only thing remaining I can't solve is grep ...

EyeCantCU•12/19/23, 12:52 PM

Do you have those Flatpaks installed?

EyeCantCU•12/19/23, 12:52 PM

If not, it should be empty

EEyeCantCU Do you have those Flatpaks installed?

fiftydinar•12/19/23, 12:52 PM

i have

EyeCantCU•12/19/23, 12:52 PM

It should use the same logic I added to install then

EyeCantCU•12/19/23, 12:53 PM

And fallback to the whole list

EyeCantCU•12/19/23, 12:53 PM

Will get that up momentarily

EyeCantCU•12/19/23, 12:53 PM

It only runs once anyway so it won't be problematic

fiftydinar•12/19/23, 12:53 PM

I thought of writing that command to text file like "installed_flatpaks" than use cat instead of echo

fiftydinar•12/19/23, 12:53 PM

but doesn't work

fiftydinar•12/19/23, 12:54 PM

To stay current, I uninstalled Sticky Notes & Calculator to test changes

EyeCantCU•12/19/23, 12:55 PM

One sec. I'll update it now

EyeCantCU•12/19/23, 12:58 PM

Hmm... Will be a couple minutes

EyeCantCU•12/19/23, 1:01 PM

Wait I remember why I didn't do this last night. If there's no Flatpaks installed, there's no Flatpaks to remove this the list should be empty regardless...

EyeCantCU•12/19/23, 1:01 PM

So I need to step through this

EyeCantCU•12/19/23, 1:05 PM

Ah. Since it's only performed once for preinstalled FPs, we only need to read it once anyway. No magic needed

EyeCantCU•12/19/23, 1:16 PM

@fiftydinar what does your flatpak manager script look like? Removal works for me?

For me I was completely unable to wake bluefin (GNOME) from sleep 100% of the time, and bazzite woul

Similar Threads

Similar Threads

Similar Threads