That's what I assumed as well I just marvel at ups' confidence they can time travel is all. Certai

That's what I assumed as well

I just marvel at ups' confidence they can time travel is all.

Certainly can't fault you, i got the availability notice, payment, and shipping notification with tracking number in less than eight hours.

My guess you got it out half an hour before everyone took off for christmas.

BBob Bushman That's what I assumed as well I just marvel at ups' confidence they can time tr...

walmis•12/28/23, 12:27 PM

Yeah that's about right

Bob BushmanOP•12/28/23, 12:30 PM

At least hope you and yours have had a happy holiday

BBob Bushman At least hope you and yours have had a happy holiday 🎉<a:Emoji_Tree:91865099559...

walmis•12/28/23, 12:38 PM

Thanks, had a bit of R&R during Christmas weekend. Hope yours was great too!

Dddrake1984 Got me this on the boxing day sale

Jehly•12/28/23, 1:03 PM

Actually really enjoy mine. Get SimShaker for Aviators (free) while you're at it.

DDofMan1234 I had a similar problem with my DOF Reality H6 motion platform, very tight on sp...

Virus•12/28/23, 2:36 PM

nice..is it sturdy enough?

LLeLv30_Superbus Can you drill a hole here and attach a base plate large enough for a 🦏 ? I know...

Virus•12/28/23, 2:44 PM

That plate is you highlitghed is too low, and you would not have the space to mount the rhino (it would be obstructed by the keyboard tray and by the central arm).
What I plan to do is to mount that central arm lower (to the next holes) and use a 3d printed plate which attaches directly to it.
I found this one on the internet...it's for the winwing orion 2....
https://www.printables.com/model/636215-joystick-adapter-for-next-level-racing-flight-simu
maybe someone with the skills can design a larger one for the rhino
or the same can be adapted some way. A wooden base with the same dimensions of the Rhino lower base can be screwed to it.
The alternative is to don't mount the central arm...and floor mount the rhino with a large wooden base.
It would not be optimal for me as I don't want to use extensions...but it could be a solution

VVirus That plate is you highlitghed is too low, and you would not have the space to m...

LeLv30_Superbus•12/28/23, 6:48 PM

That's what I did, I took an MDF base plate of 55 x 90 cm, some 2 by 4 and an Ikea chair (which Buttkicker broke already

). But if you can lower the round plate low enough, I'd try attaching base plate to that first

Andre•12/28/23, 6:49 PM

https://youtu.be/BUxMyIdAb6Q?feature=shared

This could be a nice base for a FFB Yoke. At 13:30 min. you can see the inside.

YouTubeRuss Barlow

New SmartFly Yoke: A Pilot's Review

A detailed review of the features and performance of the new SmartFly Yoke from Ray Dynamics in India. Similar to the Yoko+ in many ways but at a fraction of the cost could this be for you? See it in action and hear my pros and cons before a final recommendation.

Andre•12/28/23, 6:51 PM

Costs 399$ without Tax, shipping, etc.

SSwan What was the wait time? I put in a pre order a few weeks ago. I'm looking forw...

sabreman•12/28/23, 9:10 PM

I preorded mine in may of this year, so what 7ish months?

sabreman•12/28/23, 9:10 PM

Honestly way less than I thought it would be. I trully wasn't expeting it till next year

sabreman•12/28/23, 9:10 PM

And now the bottleneck to playing with it is lack of mount lol. Never thought monstertec would be the delay here

Ssabreman I preorded mine in may of this year, so what 7ish months?

Swan•12/28/23, 9:12 PM

Monster tech has been out of stock for all kinds of thing. I had to order the MiP thing from Germany.

Swan•12/28/23, 9:12 PM

I guess I have a ways out to start planning on how to set it up.

DDuchess ✈Are the mounting holes the same as Virpil, TM, etc?

sabreman•12/28/23, 9:13 PM

No, the dimentions are all diffrent. You'll need to either purchase one or make one unfrotunatly. The Virpil mouse pad "plate" is actually big enough, but you'd still need to at least drill your own holes through the steel.

Swan•12/28/23, 9:14 PM

oh boy lol

Swan•12/28/23, 9:15 PM

I thought there was an option to order the Mostertech mounting plate. Maybe I read that wrong

sabreman•12/28/23, 9:15 PM

There is. But I don't have ANY monstertech stuff so I just ordered a full table mount from them directly. They offer a rhino plate on their site.

Swan•12/28/23, 9:17 PM

Got it. I have the monstertech stuff already. I was thinking about going with the Chassis setup, but ill probably run in to problems mounting the Rhino on there.

Ssabreman No, the dimentions are all diffrent. You'll need to either purchase one or make ...

Duchess ✈•12/28/23, 9:19 PM

Ah, so it will require a custom mount?

Swan•12/28/23, 9:20 PM

I've been reading that people are having to drill holes, and modify things to make it work

Swan•12/28/23, 9:20 PM

3d printing things etc.

Duchess ✈•12/28/23, 9:21 PM

Hmmmm. I do not mind drilling to mount it to a QR4Rigs base plate.

Swan•12/28/23, 9:23 PM

You would think if monstertech has a mounting plate for it, it should fit on to whatever.

Duchess ✈•12/28/23, 9:24 PM

Like a dummy I did not order the monster tech plate when I paid for my Rhino order.

Swan•12/28/23, 9:24 PM

we can switch spots and you can have a second chance lol

Swan•12/28/23, 9:25 PM

I'm sure you can add it on to your order

Bob BushmanOP•12/28/23, 9:26 PM

And there isn't a need to cue for any of the extras.
Fedex might laugh on the way to the bank, but no need to wait another 7++ months

DDuchess ✈Like a dummy I did not order the monster tech plate when I paid for my Rhino ord...

sabreman•12/28/23, 10:17 PM

Monster tech offers a VP rhino mounting option for all their stick mounts on their website. So you can always just get that

Ssabreman Monster tech offers a VP rhino mounting option for all their stick mounts on the...

Duchess ✈•12/28/23, 10:19 PM

Ugh'. Then I have to get a quick release for the monster tech mount. Imagine if there was a common mounting system! The mind boggles!

Ace Simulations•12/28/23, 11:16 PM

Hi everyone. I build custom flight simulators and am looking at adding force feedback to one of them. What kit should I order that will be the most powerful? We have a dual linked yoke setup and will connect the motors into the control system but it will need to be rather powerful. Are these system tested for high load for 5+ minutes, or will they overheat/break? Any tips would be great.