This also happens to me, occasionally. I can’t seem to reliably replicate it. Rather random.
This also happens to me, occasionally. I can’t seem to reliably replicate it. Rather random.
LI tried it without Telem, switched windows and the same thing happened. Only way I could make it work is by having everything set up such that I didn’t have to switch windows anymore.
AI’ve also had that happen maybe 1x or 2x but it was under heavy motor effect and I got an encoder error. Realized the telemffb settings are based of 50% periodic gain adjusted and hasn’t happened since
ANever tabbing windows tho
DOops, I accidentally cracked the joystick thread connection. when MSFS 2020 starts the rhino in game, The stick immediately dives the y axis into the end stop and with the 10 cm extension (aluminum) attached to a virpil warbird. Wow, the rhino is powerful! How do I order a replacement part and when is the proper time to turn the power on the rhino? I just super glued it back on, gonna wait until tomorrow to rethread the stick.
SIn DCS I feel like the force is to weak around the center when flying the AH-64. I.e. when I force trim the stick there is basically no force on the stick around the first few degrees of movement. Is there some way to add a “baseline” friction so that there will be more force around the center of movement? Using telemFFB. From what I understood there is now way of changing the FFB of DCS itself as it’s run by the DCS module, but maybe there is a way to ad an effect “on top” of the DCS FFB?
OI've had my Rhino for a few weeks now and really enjoying it in DCS but I'm a little concerned about the fan noise when it kicks in. I've made a video - is this the normal amount of fan noise or is there a problem with mine?
ASounds like a fan blade is hitting something. The grille perhaps?
WYeah, sounds like it's touching the grill a bit. Grab a + screwdriver and try to tweak the tension on those fan/grill screws
HHi, which side is front and back? The red knob should it be near us? Or the opposite? Thanks.
TThe red knob should be near. Though you can change it in software if it makes mounting easier
DEither way, you can invert
HDoes not change anything for me. Just that I mounted that in my cockpit the wrong way so had to mount it the other way. 
HThe configurator is just that, a configurator? The device does not need any driver?
Is the 1.0.16 firmware the latest available? As the "update" is not active.
Also, I have a virpil grip, the constellation delta prime. I should use the virpil T50CM2 profile? Thanks
Is the 1.0.16 firmware the latest available? As the "update" is not active.
Also, I have a virpil grip, the constellation delta prime. I should use the virpil T50CM2 profile? Thanks
OThanks. Loosening the screws a little seems to have fixed it. The fan grill does shift ever so slightly now - do I need to concerned about dust ingress? If so I could put a little tape around the edges.
3To get the red button to face away from you,
do you just click on both the Xand Y axis invert in the configurator?
do you just click on both the Xand Y axis invert in the configurator?
3I have a thrustmaster warthog stick. How do i turn it the opposite way? Id the connection reversible?
3is
PI think you have to reverse the axies in the sim or in the configurator. Sorry, I can only answer theoretically as I'm still waiting for my Rhino.
AIn plug the stick. Take off. Turn 180. Put the plug back in and tighten stick. assuming you’re using a cable in between the stick and base
AI have mine on like 200mm of extension with a extended cable so I can twist mine around if I need be
3Thanks for the relies.
3Problem is I'm not using an exstention and thus not using a cable.
3Wondering how I can turn thre plug in the stick, or turn the female receptacle in the base?
Nyes.. you can unscrew the connector from the rhino and flip it around.. https://discord.com/channels/965234441511383080/972180323787997255/1100787013864669254
3Great!!
3Thanks
Anot sure to post this here or in https://discord.com/channels/965234441511383080/1093558100713279508 but I'm having some issues with getting telemFFB to work, tried both the latest wip and stable and both seem to get DCS telemetry and send effects, but I don't actually feel any of the effects, even after turning some of them up in the config, afaik the log looks like it should be sending effects:
ATelemFFB.lua exists in the savedgames script folder, entry is also added to Export.lua
ADo the native DCS effects function?
AYeah
AI'm mainly using the gun effect on F-14 as a testing point with it set to 100% in the config, but none of the effects can be felt
ASo effects work, the connection from DCS to telemffb is also fine...
AWell, I'll hand this problem to those who are more knowledgeable than me 
AYeah I'm baffled too
Nwhats your periodic effects slider set to in configurator?, is your potentiometer tied to the periodic effects (and is it turned up?)...
AI've got the pots set up for master gain and sprint gain:
Neffects are designed with periodic slider set at %50 (so please for the love of all that is holy turn the settings back to their original values in the TelemFFB config file or you will blow your arms off)
Aoh christ
Aperiodic is set at 0, that's probably it
Nthat would be it.. yeah
AD'oh ahahah
Afantastic, thanks for the help, not sure how I overlooked that 
Nyou dont know what you dont know until you know... ya know?
Aalso gun effect set to 100 is very exciting
AI had to improve my mount a bit after I lost my wings in the F-16 for the first time 
AMy whole pit was shaking. I also combined this with a JetSeat, so that my ass and back were also shaking. It was a bit unnerving, but fun.
Nmight be cool if you were in the side gunner seat in the Huey though
3Is it odd that my stick calibrated the Y axis at -22 min?
AYour y center is a bit on the low side at 1614