Thought someone said my issue of no cpu power in the performance overlay and gpu power being wrong w
Thought someone said my issue of no cpu power in the performance overlay and gpu power being wrong was fixed?
EIt's all working fine in chimeraos
Kthat was just an issue w/ mangohud
Kchanges to that are on both latest and testing, nothing gated there
EOh does it update automatically?
Kyea
Kwhatever was the newest package at build time
EWill an existing install update automatically or do I need to do something?
Kautomatic
Knext time you ublue-update/rpm-ostree update
Kor update from gamemode on a deck build
ESorry gamemode?
EI'm on a deck build
Ksteam gamemode
Kthe updater in steam also updates bazzite
ESorry not very knowledgeable on linux
EBooting it up now
EStill showing 0.0w for cpu
EAnd gpu Is like less than half what it is actually using
E
Kinteresting, what hardware?
E5600 and a 6650xt
KI'll poke around, it's for sure working on the deck
EI got no issue on chimeraos so must be fixable
Kwe're using a newer release of mangohud than chimera, which is needed for OLED atm
Kso it may just be in flux upstream
Kworth opening an issue over there just in case
ESame issue on holoiso although apparently you can fix that by installing some package to read the sensor info
EZenpower3
EGitHub
System specs: Solus Linux fully updated CPU Ryzen 5600x MB MSI MAG Mortar B550 Prior to version 0.6.7 the CPU power display worked for me, but only when "using" the INTEL RAPL power "...
EIs zenpower3 in bazziteos?
KIt's not, I'll have to add it
KGitHub
… Zen CPUs
Voltages and current are reported by Zen CPUs. However, the means
to do so is undocumented, changes from CPU to CPU, and the raw data
is not calibrated. Calibration information is avail...
Voltages and current are reported by Zen CPUs. However, the means
to do so is undocumented, changes from CPU to CPU, and the raw data
is not calibrated. Calibration information is avail...
Kthis is what broke it upstream
EWhy would the gpu be showing weird power too shows 50w at 90% load when gpu shows about 120w on chimera for same load
EIt's a 180w gpu
EWould zenpower3 be easy to install so I could test? Not sure how to install packages
EHow to install dnf in bazzite says dnf not found @KyleGospo
Vrpm-ostree, the package manager that fedora ostree systems use
EWant to install this
Ednf install goverlay
Kgoverlay is included in
:testing, you can switch to that or rpm-ostree install goverlay, then reboot
EWill it appear as a application after installing now
Konce you reboot, yes
ESays goverlay already provided use allow inactive to remove it
Tzenpower3 is a COPR
Kit's a DKMS in the copr
KI'll have to make it a kmod and add it to ublue-os/kmods
Kthen include it
T
Toh ok
