NAll the telemetry for DCS is generated by the export script. That file hasn’t changed in some time. It pulls a lot of generic telemetry and some aircraft specific telemetry. There is no special telemetry it is pulling for the A4 (generally mod aircraft are pretty thin in available data).
If you have the A4 added to your user config as a Jet, you should see the same available effect settings as any other DCS jet. Whether they work or not will depend on the telemetry (or lack thereof) from the A4.
If you have the A4 added to your user config as a Jet, you should see the same available effect settings as any other DCS jet. Whether they work or not will depend on the telemetry (or lack thereof) from the A4.
DAh very cool thanks for that update ill work with the A-4 team to get that telemetry hooked up
Janyone having trouble with the auto update for the latest version of TelemFFB ? ver e340c3dc ? downloading real slow and making hundreds on lines of ...downloading C;\users:....\temp.zip in a command line screen.
NThe DL log lines are there whether or not the download is being slow. They just scroll by really fast normally.
I’ve seen the DL site act slow before myself (whether manual download or via updater).
I’ve seen the DL site act slow before myself (whether manual download or via updater).
J30 minutes of download and the application closed down, its attempting to download again. same problem with the manual download. I'm guessing its a github issue
DIs webpage down? I want to order DIY kit. How can i do it?
Fworking for me
DDIs it adress? It returns 403 error for me
AGoogle Docs
Order request for VPforce products.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.
Once the order is ready to be fulfilled an invoice will be sent to the provided email address.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.
Once the order is ready to be fulfilled an invoice will be sent to the provided email address.
Ayeah the website seems to be downish maybe
Abut the order form forks
RHey Guys I need help I have a notification to go to this website and connect my VP Force. When I do this website pops up and says forbidden.
SI have the Brunner stick base, just ordered a DIY kit because I want to play with the different DirectX systems. I love flying the F15E but find the autopilot in the SE doesn't jive well with FFB. The center is too mushy and effects what the autopilot does. Works well when the terrain following radar is coupled though. How does the Rhino fair with the F15E?
WThis is more #
general question
general question
DThis is the answer i got back from SSA dev
"SSA uses mostly 3d model arguments from DCS. so it read the values from the 3d model... some are extracted via the export.lua interface..."
"SSA uses mostly 3d model arguments from DCS. so it read the values from the 3d model... some are extracted via the export.lua interface..."
Panyone got this seat & use it with the Rhino? how did you go with the seat thickness? did the Rhino floor mount ok still?
RYou will have to the Rhino below the seat. The cut out in the seat is not wide enough.
Phave you got this one? how thick is that part of the seat?
RI have the Boeing edition, which is the same as this seat, except color and branding. By thickness, do you mean the height of the seat cushion?
Pyeah, how thick is the seat coushion where the cutout is, if not too much trouble how big is the cut out too?
Pcheers for you're help
RI'll let you know the exact dimensions once I get back to my office. I won't be able to get you the original cut out width, as I already cut mine. But from what I remember, it was relatively easy as long as you have a long serrated knife (or even better, one of those hot foam cutter). The cushion cover is velcroed, so the foam is easy to access.
Poh that's good the foam is easy to get too, I'll take it too "Clark foam & rubber" if I have too, oooh I could get the whole foam thing cut right down, then have room for the HF8 with a gel type foam over top???? 
RYep, you can definitely do that - in fact, I am planning to do that if/when I get the HF8.
Plikely tomorrow I'm going to order the; TR160, NLR Flight seat & the NLR HF8. I saved for the 4080, but thethere were no sales at end of year plus 4080 super is coming out in a few weeks now & I wana see the real price here in Aus, I mean I can run my games/sims atm fine, I have shit/ no real mounts through, so going to get this stuff instead & re save for either the 4080 super, or 4090. Cheers for your help m8
RWith all the improvements to teleFFB there hasn’t been a firmware update that I’ve missed is there? I went to the website and just confirmed I’ve got the latest from where it looks like September was the last update.
RHere you go. Looks like it's around 140mm thick. Also, notice the steel seat pan also has a cut out - depending on how you are mounting your rhino, you may need to cut/grind a bigger opening.
R
Pcheers m8, thanks for those pics, one last thing, how far back is that metal plate from the seat edge, is it the same size as the foam cut out or in it a bit bigger? Thanks again m8
Poh sorry, I see the last pic is the bottom of the seat, the metal part you were refering too, cheers
Pit's covered by material is it?
Pwhat sort of extension do you use?
RYou mean the seat pan? Yes, it's covered with that black fabric. That's glued in, so it's a little anoying if you are drilling through it (drill bits will bind and may even break).
Pahh ok, can hopefully cut the material & use glue to stop it threading apart, or if it's the right type of material can burn a small hole for drill
Phopefully I can undo the black material from the seat pan, cut the cut out a bit bigger then re-glue the fabric in place
P& did I understand correct that the seat cushion cover comes off?
RI built my own gimbal. The extension is just enough so that the grip clears my thighs.
Pie. the green & black cover on the seat
RYes the cushion cover is velcroed it comes right off.
Poh you cut it out so the whole rhino base fits in? ok, my rhino will still be 'floor' mounted & only the extension coming up to the cut out
PI see the velcro on the seat pan material for the seat cushion, but sorry to ask again just to be sure the actual cover material on the seat cushion itself, does that come off to reveal the foam underneath? sry to ask again just wana be clear
Plikely ordering things tomorow morning
RHere is how it’s mounted. My gimbals size is smaller than the rhino and the way I had it mounted I didn’t have to cut the steel seat pan, just the cushion. YMMV
RYep it’s right off.
Pperfect thanks m8
Palmost like it was made for us do cut it larger
Pthey should of made the cut out in the seat pan over sized for that reason too
Pok I think I've got the best idea about that seat I'll get without it here, cheer for all the help m8
P
