Hey Walmis, I just tried that and it seems that it starts some sort of feedback loop that sends the

Hey Walmis, I just tried that and it seems that it starts some sort of feedback loop that sends the stick moving in all directions without any input. The effect seems to be more magnified when damper and inertia are enabled but even with just spring force it still happens.

MMustang Hey Walmis, I just tried that and it seems that it starts some sort of feedback ...

walmis•1/20/24, 5:42 PM

Yeah, it's a bit different for the big motor kit. It needs to be tuned - too high gains will cause oscillations.

MustangOP•1/20/24, 5:44 PM

Ah, ok. So Should I just start with a smaller gain or is there another solution? Because I'm also trying to tighten up the center a little bit.

walmis•1/20/24, 5:45 PM

This one works well on my Rhino:

MMustang Hey Walmis, I just tried that and it seems that it starts some sort of feedback ...

walmis•1/20/24, 5:46 PM

Set deadband to zero also

MustangOP•1/20/24, 5:57 PM

Ok will do. I'll keep messing with the settings. Thanks for your help!

JOSGEM•1/20/24, 8:54 PM

Hello, the rhino thread is worn out and when trying to attach the f18 stick it is impossible to adjust it and it oscillates. Is there any way to solve it?

Sunshine•1/20/24, 9:02 PM

Print a new one

JOSGEM•1/20/24, 9:05 PM

I have little knowledge about it. Where can I get the characteristics of the part to be printed?

Sunshine•1/20/24, 9:24 PM

@walmis, he needs this part

JJOSGEM I have little knowledge about it. Where can I get the characteristics of the par...

Sunshine•1/20/24, 9:25 PM

What I would do is copy it with some calipers, my CAD program, and go to town printing it, or make a better one out of Aluminum

Sunshine•1/20/24, 9:26 PM

But if you don't have the time, or facilities, you'll have to acquire a new one.

Bob Bushman•1/20/24, 9:26 PM

I'm sure Walmis could just send you the file itself

Fr4Ged•1/20/24, 10:25 PM

is that a wear part or unusual handling?

TonyM•1/20/24, 10:30 PM

I also feel that this part will wear out soon when switching the stick.
Maybe the best would be to have the .stl data pinned.

Fr4Ged•1/20/24, 10:33 PM

so this happens because the user switches sticks a lot?

FFr4Ged so this happens because the user switches sticks a lot?

TonyM•1/20/24, 10:39 PM

or when you insert the new stick not 100% correctly. And the probability is of course higher when you switch the stick quite often.

JOSGEM•1/20/24, 10:56 PM

I have changed sticks 4 times, one to test with the f18, another with the VPC Mongoos t50 of a friend and another with a z extension with each of them

Fierce_Fire•1/20/24, 10:59 PM

thats curious as i had a friend print a petg part to attach my vkb adapter(which is also printed tbf) and ive (un)screwed that at least 4 times as well without any damage

JOSGEM•1/20/24, 11:02 PM

Maybe the mistake was mine, which is most likely. I have near vision problems and sometimes I don't see well. I'm just trying to know if there is a way to solve it. If it's possible to print this piece again it would be great

Fierce_Fire•1/20/24, 11:04 PM

if you can get walmis to send the file and someone near that can print, or walmis just print it for you itll likely be easy to fix

Fierce_Fire•1/20/24, 11:04 PM

youll likely have to open up the gimbal though

DAPA•1/21/24, 2:39 AM

@walmis Is it possible to get the STL file for the threaded Rhino connector? I'd like to print a few spares on the off chance I go to hook up one of my sticks and mess up the thread.

TonyM•1/21/24, 3:20 AM

Same for me

@walmis

ddrake1984•1/21/24, 4:15 AM

could I get this too please, I may consider getting this printed in metal

walmis•1/21/24, 8:41 AM

Attached the printables: https://discord.com/channels/965234441511383080/1198547200058347670
If anyone requires spare parts one can request them via order form: http://order.vpforce.eu

JOSGEM•1/21/24, 11:06 AM

Thank you very much

Valmis

Mr. S•1/21/24, 3:19 PM

OK, so sometimes either my USB hub or the joystick loses connection for a second, enough to trigger the disconnect-reconnect sound on the joystick (PC does no see that but I hear the buzzer). when this happens, DCS does not reconnect the joystick even if I do a "rescan devices" from the controls settings in DCS, the only solution is to restart DCS altogether. Is there any fix to this ?

Bob Bushman•1/21/24, 3:24 PM

Try connecting directly if possible.

Bob Bushman•1/21/24, 3:26 PM

Mostly as a reoubleshooting option, also worth updating drivers for your mainboards usb controllers.

If still persisting I'd consider something like a bad cable or bad hub.

MustangOP•1/21/24, 6:01 PM

Question about helo trim within DCS: My understanding of how it should work is that when I release the trim button it basically sets that stick position as the new center. What I'm experiencing is that the stick kinda sets that new center but then still pulls part way back towards the original center when I release the trimmer.

I've got instant trim set within DCS as recommended by the manual and have tried this with the Hind and Ka-50. Am I just misunderstanding how trim should work or is it a settings issue on my end?

MMustang Question about helo trim within DCS: My understanding of how it should work is t...

Number481•1/21/24, 6:03 PM

what you describe sounds like what happens when you have axis curves set in DCS. Curves+FFB don't get along.

NNumber481 what you describe sounds like what happens when you have axis curves set in DCS....

MustangOP•1/21/24, 6:13 PM

Ah yeah that fixed it, thanks for your help! I'm so used to adding curves that I didn't even think about it being a problem.

Duchess ✈•1/21/24, 6:48 PM

Yeah, I have had to (and gladly) get rid of any curves within DCS.

AndyHill•1/21/24, 6:54 PM

luckily the rhino offers massive movement range, which should at least help with non-curved operation

Bob Bushman•1/21/24, 7:16 PM

And you can map and scale these as you wish in configurator, and switch as needed with a few clicks.

JOSGEM•1/21/24, 8:22 PM

Hello, there is no way I can get TelemFFB to work, the only thing I get is the waiting for data message. I have reinstalled everything, deleted the registry key but it's still the same. I guess I'm missing something.In Il2 it works perfect.The issue is only in DCS

BBob Bushman Mostly as a reoubleshooting option, also worth updating drivers for your mainboa...

Mr. S•1/21/24, 8:32 PM

I'd exclude that. It does not happen with any other device and I already did some intensive troubleshooting to find out I was using an insufficient power source for the USB. This one time the issue was the whole M/B USB went down for a second (so every USB peripheral got disconnected and reconnected). Every other one came back as available in DCS but the Rhino. So to my mind that says two things
1) problems with the USB subsystem in the m/b (drivers, chipset dying, w/e) BUT
2) notwithstanding that the Rhino doesn't seem to be able to come back alive (in DCS, because the system sees it alright) from a disconnect. So despite having a potential USB chain problem (chipset, drivers, cable, hub, power source you name it) the Rhino still refuses to resuscitate in DCS when it "plugs back in" eventually.

Mr. S•1/21/24, 8:35 PM

I'ma dive in and give it another whirl, see if it happens again.

Bob Bushman•1/21/24, 8:39 PM

As I've got a cat fond of chewing cables, I can attest a bad cable can indeed bring dowm the whole system as a safety precaution.

Cant recommended usb treeviewer more.
https://www.uwe-sieber.de/usbtreeview_e.html
If anything drops out and reconnect it will be marked on the tree and has helped diagnose a few almost similar cases, but its a common synptom with a whole bucket of varying causes so can't just say "its x" guaranteed.

Mr. S•1/21/24, 8:39 PM

No. I have just tried it. The Rhino and the VPC Rotor TCS plus are both connected to the same hub.

Mr. S•1/21/24, 8:40 PM

with DCS running, if I unplug and re-plug the collective, it comes back for the system and DCS.

JJOSGEM Hello, there is no way I can get TelemFFB to work, the only thing I get is the w...

Number481•1/21/24, 8:40 PM

Assuming you have allowed TelemFFB to install the export script for you, Check the DCS logs to see if there is anything causing the script to fail.

It’s possible there’s a conflict with something else in your setup which is causing it to fail (and therefore not send any telemetry)

Mr. S•1/21/24, 8:40 PM

when I unplug and plug back the Rhino, the system sees it ok but it stops existing for DCS

NNumber481 Assuming you have allowed TelemFFB to install the export script for you, Check t...

Mr. S•1/21/24, 8:41 PM

hm, on this last test TelemFFB wasn't even running.

Mr. S•1/21/24, 8:41 PM

but ok, let me have a look at it. Any keyword I might want to look for?

MMr. S hm, on this last test TelemFFB wasn't even running.

Bob Bushman•1/21/24, 8:42 PM

He was responding to a completely different person

BBob Bushman He was responding to a completely different person 😅

Mr. S•1/21/24, 8:42 PM

Ah I see that now. Sorry

MMr. S hm, on this last test TelemFFB wasn't even running.

Number481•1/21/24, 8:42 PM

That was a reply for @JOSGEM

MMr. S Ah I see that now. Sorry

Bob Bushman•1/21/24, 8:43 PM

It happens.

Mr. S•1/21/24, 8:44 PM

but yeah, the log was a good idea nonetheless. In there I see


2024-01-21 20:38:04.857 INFO    APP (Main): Device unplugged: [USB] Rhino FFB DFU
2024-01-21 20:38:07.210 INFO    APP (Main): Device plugged: [USB] Rhino FFB DFU


2024-01-21 20:38:04.857 INFO    APP (Main): Device unplugged: [USB] Rhino FFB DFU
2024-01-21 20:38:07.210 INFO    APP (Main): Device plugged: [USB] Rhino FFB DFU

But still, no input in game even after it registers the reconnection.
Something to do with FFB maybe?

Hey Walmis, I just tried that and it seems that it starts some sort of feedback loop that sends the

Similar Threads