yeah, if you run DCS by itself, you will find that your pedals react to the x axis FFB for the cycli

yeah, if you run DCS by itself, you will find that your pedals react to the x axis FFB for the cyclic. TelemFFB overrides that and just sets no springs with a configurable dampening setting

Tinman•2/27/24, 3:05 PM

Im planning on adding ffb to my collective soon, still figuring out how to connect the direct drive to the virpil collective.

NNumber481 yeah, if you run DCS by itself, you will find that your pedals react to the x ax...

Tinman•2/27/24, 3:06 PM

sweet, was testing it earlier. was trying to look for faults and didnt find any. I did have telemffb running so thats why

Tinman•2/27/24, 3:06 PM

@walmis @Number481 Thank you for your time helping me out guys, much appreciated.

Wwalmis Hi, if the motor is powered, indicated by the LED, check the communication wire ...

Dalbath•2/27/24, 3:41 PM

Thx, it seems to be the problem. I tried to unplug those wire and probably damaged the connector. I think îll have to buy a new one.

AndyHill•2/27/24, 4:18 PM

what types of screws & stuff is Rhino made with, I need to upgrade my set and I want to make sure I get suitable stuffs for screwing rhinos

Hharf4ng in a real helicopter, do force trim also work on pedals? Or only cyclic?

exil35•2/27/24, 5:01 PM

If you mean the force trim release that's only applicable for cyclics. So there is no button that you press that allows you to move the pedals more "lightly".
So no need to push the button and then move the pedals. You can just move them without hitting the button.

Tinman•2/28/24, 1:45 AM

Just to confirm, will this be able to power a stock rhino, a 1x 86BLF03 and 1x 86BLF04 together? Was afraid it might burn out the stock Rhino motors. Planning on consolidating the power supply to clear out my wire mess.

Tinman•2/28/24, 1:45 AM

https://www.amazon.com/gp/product/B07SQLJG5L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Mean Well LRS-350-24 AC/DC Switching Power Supply 350.4W 24V 14.6 A...

This LRS-350-24 AC to DC power supply safely converts alternating currents into direct currents that your electronic devices can make use of. It has a voltage of 24 V and maximum output power of 350.4 W. This part's single output can handle a current up to 14.6 A. This part has a temperature rang...

TTinman https://www.amazon.com/gp/product/B07SQLJG5L/ref=ppx_yo_dt_b_search_asin_title?i...

Fierce_Fire•2/28/24, 5:51 AM

I believe I am using that exact one to power my 2 blf04 motors so yes you should be good

FFierce_Fire I believe I am using that exact one to power my 2 blf04 motors so yes you should...

Tinman•2/28/24, 7:25 AM

can the stock rhino take 24v?

TTinman can the stock rhino take 24v?

Fierce_Fire•2/28/24, 7:32 AM

Yes, the board has a power regulator smth so as long as you stay within its spec nothing should happen to the motors

Tinman•2/28/24, 8:27 AM

Alright, tyvm

Wwalmis I'm planning to release a HW kit for MFG pedals soon, but there are DIYs out the...

mark turner•2/28/24, 11:49 AM

Thats a sale right here.....any idea of timescale Walmis?

Bob Bushman•2/28/24, 11:50 AM

Hard to say no to that

AndyHill•2/28/24, 12:17 PM

I'd estimate you'll get yours some time after I get mine

Andre•2/28/24, 1:07 PM

I have a Virpil Blackhawk Grip attached to my DIY Collective and connected to the Rhino USB Board. All buttons are recognized, but when i press any of the Hat buttons (up/down,left/right), the corresponding center press button also lights up. I currently have it set to Generic grip, but tried all the other options and there is no change in behaviour. I’ve also tried both the options Hat switch as button, and 4-way Hat.
Any ideas to get this working correctly?

walmis•2/28/24, 1:59 PM

Virpil hats need additional decoding, ~~do any of the existing Virpil grip profiles work for the blackhawk grip?~~
Can you DM me the "Generic grip (debug)" output in the Debug tab and I'll also need the mapping for the hats, table like this would be very useful. I'll add a new profile to the firmware

walmis•2/28/24, 2:06 PM

Andre•2/28/24, 2:42 PM

How do i get the Generic Grip debug output?

walmis•2/28/24, 2:42 PM

select

Generic grip (debug)

Generic grip (debug)

profile

CaiJ•2/28/24, 2:58 PM

it says MSFS isnt enabled even thouigh i have the game open? anyone know how to fix?

Andre•2/28/24, 2:59 PM

Here is the CSV file. Is that the correct Debug file?

samples.csv616.64KB

Grip_buttons.txt274B

Andre•2/28/24, 3:05 PM

Btw: the #2 Button also acts as the Hat buttons. When pressing Up. both Up (13) and Press (12) are lighted.

walmis•2/28/24, 3:06 PM

Also please include the Grip debug data as shown

CCaiJ it says MSFS isnt enabled even thouigh i have the game open? anyone know how to ...

Number481OP•2/28/24, 3:11 PM

1.) You'll want to grab the latest 'WiP" version (see pinned messages here: https://discord.com/channels/965234441511383080/1093558100713279508)
2.) Check out the manual (Section 4.2) https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.ghj8phqmqr7y

While the WIP version is linked in the doc and the github readme, its not always obvious that you probably want that version

Wwalmis Also please include the Grip debug data as shown 🙂

Andre•2/28/24, 3:16 PM

You mean a printscreen of the debug window? Isn't that the same as the samples.csv? Sorry for being a noob..

Andre•2/28/24, 3:16 PM

Tinman•2/28/24, 3:19 PM

@walmis Hello. I think the F03 motor I purchased is DOA.

NNumber481 1.) You'll want to grab the latest 'WiP" version (see pinned messages here: http...

CaiJ•2/28/24, 3:20 PM

Got it thank youi

Tinman•2/28/24, 3:21 PM

I turned off my system and swapped with the F04 and it gave all the expected readings on the left panel. Also twisted the axis and showed movement.

Tinman•2/28/24, 3:21 PM

When I switched back to this F03 motor, this is what I get

Tinman•2/28/24, 3:23 PM

Tinman•2/28/24, 3:25 PM

walmis•2/28/24, 3:27 PM

Can you check the motor IDs?

Tinman•2/28/24, 3:27 PM

hold on

Tinman•2/28/24, 3:31 PM

walmis•2/28/24, 3:31 PM

So yeah, this one is with Pitch id

walmis•2/28/24, 3:32 PM

You need to disable X and enable Y in the configurator

Tinman•2/28/24, 3:32 PM

Working now! Tyvm!

Tinman•2/28/24, 3:32 PM

TonyM•2/28/24, 6:20 PM

BTW, is there any information concerning the date when we will be able to preorder/order the FFB kit for the MFGs pedals?

MashedPotato•2/28/24, 6:24 PM

Last news was late Feb due to a parts shortage on the bigger motors, so hopefully any day now

Col. Sanders•2/29/24, 9:12 AM

Looking to get an extension cord for my vkb adapter. Not sure what type of cable it is. Any help?

CCol. Sanders Looking to get an extension cord for my vkb adapter. Not sure what type of cable...

walmis•2/29/24, 2:09 PM

It's a GX12 cable

mark turner•2/29/24, 5:19 PM

Hi, a few weeks back, I set up VP Force config with some differing profiles for various modules. I had this working nicely, so when I flew the F14,. it loaded my F14 profile, the F5 , the F5 profile etc. However, it now appears to have stopped working.....Telem FFB does not register the correct module on the GUI anymore for example, I just flew in the Hornet and Telem FFB b was saying it was an F14.....it appears stuck on F14....any ideas what might be going on and how I might be able to unfuck it? Thanks! I have checked and in the system/edit sim section, each jet has the correct vpconf file selected at the bottom.....

Mmark turner Hi, a few weeks back, I set up VP Force config with some differing profiles for ...

Number481OP•2/29/24, 6:27 PM

can you create a support bundle (help menu) and post that here, or post your userconfig xml file? Sounds like maybe you have an overzealous match string set up

Also a screenshot of TelemFFB when you are in a aircraft like the F18, but TelemFFB is loading the config for the F14

Caprice•2/29/24, 8:06 PM

Hey @walmis I just received a 2nd rhino order near completion message, I must have been signed up twice somehow. I wanted to know that this 2nd order could be cancelled and pushed out to the next lucky customer.

NNumber481 can you create a support bundle (help menu) and post that here, or post your use...

mark turner•2/29/24, 8:11 PM

Sure, just had a look but could not find the xml file....can you point me?

smitty•2/29/24, 8:31 PM

Mmark turner Sure, just had a look but could not find the xml file....can you point me?

Number481OP•2/29/24, 8:46 PM

You can create the support bundle per above (which includes config and logs) or you can open the config directory from the system menu

yeah, if you run DCS by itself, you will find that your pedals react to the x axis FFB for the cycli

Similar Threads

Similar Threads

Similar Threads