theres no reason to touch cpu clocks on the sd
theres no reason to touch cpu clocks on the sd
Atheoretically, i guess
A
Yeah I tried to indirectly limit CPU clocks by using Manual GPU Clock and TDP Limiter together but I find I needed to set the TDP Limiter to 4 watts along with Manual GPU Clock set to 800 MHz for the CPU to not draw too much power.
Asounds like you need to report this to the plugin dev
AAlready reported the first issue to them but as for the second there is already a tracker for that issue so I didn't report it to him.
AActually there are many games which are having the issue of CPU consuming too much power. From my experience its primarily old CPU intensive games where the issue pops up but others have reported the same even in modern games like Death Stranding and Hades:https://www.reddit.com/r/SteamDeck/comments/virka3/games_where_the_cpu_uses_too_much_power/
Aboosting the gpu clock does not work?
AIts really not as efficient as directly manipulating the CPU clocks as you need to set the TDP Limiter pretty low at 4 watts in order for the CPU to not consume too much power with a Manual GPU Clock of 800 MHz.
Awelll pull it to 4w then whats the problem
AThat's pretty low power ceiling. Sure you can play ancient games with it but any modern game the TDP Limit is too low.
Aso why cant you push the gpu clock again?
Awhy keep it at 800hz?
AI'm waiting on this for CPU clock management on non-Deck devices
https://www.phoronix.com/news/AMD-Core-Perf-Boost-Linux
https://www.phoronix.com/news/AMD-Core-Perf-Boost-Linux
While not quite as exciting as yesterday's AMD XDNA driver publishing for Ryzen AI on Linux, a notable patch series out of AMD today on the Linux front is enabling AMD Core Performance Boost controls within their P-State CPU frequency scaling driver.
AThats the sweet spot for most games. You can set it higher but still it's not as good as directly limiting the CPU clocks. They should just allow people to cap the power limit of the CPU of Deck rather than the CPU+GPU as that would eliminate this problem.
Hyes you need the gpu to have a monitor output, like a ghost hdmi/displayport adapter
SGot it, running with the new HDR fork of IDD displaydriver, works great! Thanks for all your help @HikariKnight !
Hnp!
Hso you managed to get an output then?
SYeah 
SThink something is wrong with how the mouse is bound though, its very hard to use
Hremove the tablet device and add usb mouse and keyboard
SI did, but the ps/2 mouse and keyboard is added back automatically, i have added the virtio keyboard and mouse though
Hi didnt say remove the ps2 mouse and keyboard 
Hthose are required for the vm to work
SAh makes sense then
Hjust remove the tablet device then if it is there
Honce thats removed, shut down the vm and start it again then the mouse and keyboard should work better through looking glass
SI had removed the tablet device already, just saw it was set to 30hz, much better now i set it to 120
SStill a bit weird on the desktop but probably better in game, remember the same when using moonlight
TTried this out now and it still seems to not detect gyro hrmm
Aemulator?
TChiaki4deck
Atheres at least another user that has it working
Ai dont have a ps4
THrmm ye all good
E
Eoh its asking me to enroll mdk or something
Ei should read the installation guide
Ayes you need to enroll a mok key
Eoh its so small i cant read it said mok
Ashould be somewhere there
TIt's so weird gyro works when in chiaki overlay settings can see mouse move but in game beyond two souls doesn't detect :pepethinking: I might create a section in help and see if other users perhaps have a certain behavior that works in game thanks for the help before
Awhat
Aeither steam input or chiaki can have the gyro
Anot both
Tyes!
SLooking glass is amazing, as close to no-compromise linux workstation/gaming i've ever seen, VR streaming a bit stuttery but getting there
SOnce gnome gets HDR working i don't think i'll ever need windows again 
WHi any help on running system update / I just just hangs after custom layer needed
W
WLegion go
