@Obamator Welcome! Can you let us know a bit about your technical background, what brings you to De

@Obamator Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

barafael•3/12/24, 6:46 AM

Re MQTT, an honourable mention goes out to NATS and PubNub. Those are really lightweight and powerful.

MMarvee Amasi Hello, Good day to everyone 🙌, so I'm thinking of setting up a small data acqui...

Aditya thakekar•3/12/24, 7:56 AM

Just stick with c

Ttechielew I'd say it depends on your design objectives and what you're comfortable in work...

Marvee Amasi•3/12/24, 7:57 AM

Thank you @techielew , I am actually comfortable working with C , but i just need something faster and easier to work with, with ease in debugging.

AAditya thakekar Just stick with c

Marvee Amasi•3/12/24, 7:59 AM

@Aditya thakekar , heard of tools like Cython or SWIG ?

Aditya thakekar•3/12/24, 8:00 AM

Yes

Aditya thakekar•3/12/24, 8:00 AM

Less the complication better it is. Start with simple things

AAditya thakekar Less the complication better it is. Start with simple things

Marvee Amasi•3/12/24, 8:06 AM

Okay thanks a lot @Aditya thakekar , I will just continue with C

SaßìOP•3/12/24, 9:01 AM

@pradyoth_ Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

MMarvee Amasi Hello, Good day to everyone 🙌, so I'm thinking of setting up a small data acqui...

Joseph Ogbonna•3/12/24, 9:10 AM

For a solid data acquisition setup on an RTOS, go with the main stack , your C/C++. Python might not handle the real-time stuff as well. Keep it straightforward. C is quite good and you should be able to see some example files for it than Python

Camila_99$$•3/12/24, 10:00 AM

Hi guys has anyone used FreeRTOS and encountered the problem that when i call the Function
vTaskStartScheduler();
It causes Hard fault

Does anyone have a solution to this problem?

CCamila_99$$Hi guys has anyone used FreeRTOS and encountered the problem that when i call th...

Navadeep•3/12/24, 10:27 AM

classic case. Curious to know what everyone do...

nour_oud•3/12/24, 12:30 PM

New poll, y'all. Let us know what your esp32 framework/ide of choice is: ⁠https://discord.com/channels/1130679493799977062/1199293807737450538/1217085981086449766

boualleg sabrina•3/12/24, 12:59 PM

hello everyone

Bboualleg sabrina hello everyone

nour_oud•3/12/24, 1:05 PM

Hi Sabrina

Bboualleg sabrina hello everyone

Marvee Amasi•3/12/24, 1:12 PM

Hi dear

CCamila_99$$Hi guys has anyone used FreeRTOS and encountered the problem that when i call th...

Marvee Amasi•3/12/24, 1:18 PM

@Camila_99$$ , attimes it could be issues with insufficient stack sizes , it's kind of a common problem

boualleg sabrina•3/12/24, 1:28 PM

Can we discuss the concept of the digital twin and its application in Industry 4.0?

Bboualleg sabrina Can we discuss the concept of the digital twin and its application in Industry ...

Marvee Amasi•3/12/24, 2:19 PM

Yh very multi-purposeful . Handles simulation and modeling, and also assists in data collection and analysis all in one software. I feel it's more better than using a lot of softwares to handle these individual tasks. Simulink + predix = (digital twin)^1/2 lol

MMarvee Amasi @Camila_99$$ , attimes it could be issues with insufficient stack sizes , it's ...

Camila_99$$•3/12/24, 2:20 PM

Yeah that's why I'm asking here in case someone else has faced the same problem and discovered a solution.

Bboualleg sabrina Can we discuss the concept of the digital twin and its application in Industry ...

Umesh Lokhande•3/12/24, 3:50 PM

I understand digital twin as a virtual copy of real physical devices/processes. It's Implementation allows monitoring and analysis of devices so it's useful for predictive maintenance in industries like manufacturing, energy, etc

SaßìOP•3/12/24, 3:53 PM

@Ronak Panchal Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

SaßìOP•3/12/24, 3:54 PM

@Ankara_Messi Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

UUmesh Lokhande I understand digital twin as a virtual copy of real physical devices/processes. ...

Marvee Amasi•3/12/24, 4:10 PM

aymen ammari•3/12/24, 5:29 PM

Hi everyone, anyone wanna share us some concerns or need, let us know, we would be happy to help you

SaßìOP•3/12/24, 6:20 PM

@Vizsla Geek Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

SaßìOP•3/12/24, 7:14 PM

Friendly Reminder about Upcoming Event
https://discord.com/invite/E8cajQmb?event=1215941954215612516

SSaßì @Vizsla Geek Welcome! Can you let us know a bit about your technical background...

Vizsla Geek•3/12/24, 8:12 PM

I've been chatting with Brandon... I knew him in his old OSM days. We've been talking about the community and I came to check it out. My tech background--been in editing and marketing of tech for years, starting with the really geeky publication Circuit Cellar. Not an engineer, but know the s/w side of things at a pretty solid higher level.

nour_oud•3/12/24, 8:15 PM

Welcome @Vizsla Geek! Happy to have you as a DevHead.

Satan•3/12/24, 8:20 PM

Hello! Is here anybody familiar with sensor MICS-6814? That´s sensor for CO,NO2 and NH3.

SSatan Hello! Is here anybody familiar with sensor MICS-6814? That´s sensor for CO,NO2 ...

Satan•3/12/24, 8:20 PM

https://cz.mouser.com/ProductDetail/Amphenol-SGX-Sensortech/MICS-6814?qs=YCa%2FAAYMW01pNK%252BnW3Jo7g%3D%3D

Satan•3/12/24, 8:21 PM

It has got very confused datasheet and wiring. If here someone who has a few experience with that, I will be glad, thank you.

Chimmuanya Okere•3/12/24, 9:36 PM

Currently working on the power section of my schematics design. Am using a voltage regulator of 3.3v 500mA. The total power(current) of the board at full load (when operating at full capacity) is 470mA, and the regulator has a drop out or leakage current of about 50mA.
Will it still be ok for me to use this regulator or I should change to another. But the device will not always operate at full capacity, just once in a while. Will it cause any issue on the board. @PCB & Analog @MCU, MPU & Firmware

SSatan It has got very confused datasheet and wiring. If here someone who has a few exp...

techielew•3/12/24, 9:50 PM

what specifically are you looking for help with? the interface?

CChimmuanya Okere Currently working on the power section of my schematics design. Am using a volta...

techielew•3/12/24, 9:51 PM

@ShreeshaN can probably help in a few hours

VVizsla Geek I've been chatting with Brandon... I knew him in his old OSM days. We've been ta...

aymen ammari•3/12/24, 10:15 PM

Welcome to the server vizsla

SSaßì @Obamator Welcome! Can you let us know a bit about your technical background, w...

Obamator•3/12/24, 10:16 PM

Hi, my name is Marvin. My hobby is programming and some other tech-related stuff

I am not a pro, but I know some things in some areas. I joined this server to help people if I can and ask questions if I need help.

CChimmuanya Okere Currently working on the power section of my schematics design. Am using a volta...

aymen ammari•3/12/24, 10:21 PM

For butter results and the regulator won't heat up you have to add at least 25-30% that means you're consuming 450mA you should use 563mA - 585mA more is better , also it is recommended to use a heat sync with some thermal paste on it, because the heat effects regulator by time

OObamator Hi, my name is Marvin. My hobby is programming and some other tech-related stuff...

aymen ammari•3/12/24, 10:27 PM

You're welcome Marvin, always remember that we are here to help each other, don't hesitate or be shy from asking, even little questions

Ttechielew what specifically are you looking for help with? the interface?

Satan•3/12/24, 10:29 PM

Hi, I have problem about bad voltage coming from the sensor.. If i convert it to ppm I will get 400 ppm CO, that´s not possible. Do you want to see my diagram?

Camila_99$$•3/12/24, 10:37 PM

Hum it sounds like there could be a hiccup with your sensor. Have you tried double-checking its calibration and connections?

CCamila_99$$Hi guys has anyone used FreeRTOS and encountered the problem that when i call th...

nour_oud•3/12/24, 10:54 PM

I think this article will be helpful for that issue https://www.freertos.org/Debugging-Hard-Faults-On-Cortex-M-Microcontrollers.html

FreeRTOS

Debugging and diagnosing hard faults on ARM Cortex-M CPUs

Debugging hard fault exceptions on ARM Cortex-M3 and ARM Cortex-M4 microcontrollers

CCamila_99$$Hum it sounds like there could be a hiccup with your sensor. Have you tried doub...

Satan•3/12/24, 10:59 PM

Satan•3/12/24, 11:00 PM

I think problem will be with resistors (560k,470k and 10k)

Ben•3/12/24, 11:16 PM

Hi all, I'm currently working on a computer vision project. I've written code to measure distance using a single camera, but it's not performing well. I need some assistance in adjusting some parameters. Can anyone help me with this?

vyomagami•3/13/24, 1:41 AM

Hi all, can anyone suggest me autofocus camera module with USB protocol

SSatan Click to see attachment

techielew•3/13/24, 2:51 AM

Another one @ShreeshaN, @Umesh Lokhande or @Aditya thakekar may be able to assist with

SSatan Click to see attachment

Aditya thakekar•3/13/24, 2:53 AM

Which sensor

Aditya thakekar•3/13/24, 2:56 AM

If the data sheet of the sensor you shared is what you are using

Vvyomagami Hi all, can anyone suggest me autofocus camera module with USB protocol

techielew•3/13/24, 2:56 AM

What's the use case? And what stage of development are you in? If you're looking for a USB-based eval module, you could check out Arducam: https://www.arducam.com/?s=usb&id=98994. They have a decent selection of affordable evks. If you are looking for something more professional it may be good to look into a higher end camera and combine it with a carrier. Connect Tech Inc creates such carriers and they have partnerships with commercial-grade camera manufacturers. lmk which direction you're thinking.

Arducam

You searched for usb - Arducam

Aditya thakekar•3/13/24, 2:56 AM

They have clearly mentioned all resistor values. Plus it is 3 in one.

@Obamator Welcome! Can you let us know a bit about your technical background, what brings you to De

Similar Threads

Similar Threads

Similar Threads