DevHeads IoT Integration Server•2y ago

Congrats! Send pic when you have time. PS - in galway for college; where's home?

Congrats! Send pic when you have time.

PS - in galway for college; where's home?

Eelectro_coco Hey everyone I am electronics engineer and working in embedded software for 4 y...

techielewOP•3/14/24, 3:31 PM

Where do you work? What type of company?

Ttechielew Where do you work? What type of company?

electro_coco•3/14/24, 3:37 PM

i am working as IOT engineer remotely with an irish firm soon i will be out of job

OObamator So, I have a problem with connecting my Trust Webcam via an OTG hub to my Raspbe...

abhishek awasthi•3/14/24, 3:57 PM

so what kind of otg hub are you using ... is it externally powered .. ? like i saw many people have reported similar issue and they got their usb devices recognised via using a powered hub .. so you may check that ,...

OObamator Thanks for your message, but it's not a power issue. I already measured it, and ...

Obamator•3/14/24, 3:58 PM

Its a powered hub

Aabhishek awasthi so what kind of otg hub are you using ... is it externally powered .. ? like i s...

Obamator•3/14/24, 4:00 PM

Its 5.1v i measured it so its not a power issue i think

Ttechielew Congrats! Send pic when you have time. PS - in galway for college; where's hom...

BenCos18•3/14/24, 4:04 PM

Co galway
So not too bad to travel in tbh

BenCos18•3/14/24, 4:06 PM

BenCos18•3/14/24, 4:06 PM

Haven't got back home yet though

Navadeep•3/14/24, 4:07 PM

Love these Lilygo modules. I used the TTGO-TCALL exctensively for one of the agritech project.

BenCos18•3/14/24, 4:08 PM

Yep lillygo stuff is nice for sure

Navadeep•3/14/24, 4:08 PM

They're probably the first to find innovative combination of modules to build a devkit around it.

Saßì•3/14/24, 4:08 PM

@Saii Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

BenCos18•3/14/24, 4:08 PM

Have one of their smaller 433mhz lora dev boards running a tinygs reciever

NNavadeep They're probably the first to find innovative combination of modules to build a ...

BenCos18•3/14/24, 4:09 PM

Yep
Heltec is another good one just I prefer lillygo tbh

BenCos18•3/14/24, 4:09 PM

https://github.com/kizniche/ttgo-tbeam-ttn-tracker
Plan is to use it for this

GitHub

GitHub - kizniche/ttgo-tbeam-ttn-tracker: TTGO T-Beam Tracker for T...

TTGO T-Beam Tracker for TTN Mapper and TTN Tracker using US (915 MHz) and EU (868 MHz) frequencies - GitHub - kizniche/ttgo-tbeam-ttn-tracker: TTGO T-Beam Tracker for TTN Mapper and TTN Tracker us...

SSaßì @Saii Welcome! Can you let us know a bit about your technical background, what ...

Saii•3/14/24, 4:11 PM

I'm a 2nd yr engg student I'm into reverse engineering , ctfs and low level coding, just started to gain interest in embedded prog and stuff , hoping to work on with a few proj this sem break

BenCos18•3/14/24, 4:11 PM

Haha similar here just I'm a first year doing mechanical engineering

OObamator Its 5.1v i measured it so its not a power issue i think

abhishek awasthi•3/14/24, 4:11 PM

okaayy ... but whats the hub you are using .. share its name and ... voltage obviously would not the issue as core ..

SSaii I'm a 2nd yr engg student I'm into reverse engineering , ctfs and low level codi...

Navadeep•3/14/24, 4:12 PM

Next you're going to be in 1st year if reverse engineered aggressively.

SSaii I'm a 2nd yr engg student I'm into reverse engineering , ctfs and low level codi...

Navadeep•3/14/24, 4:12 PM

cheers! oh sem breaks...need you more.

Saii•3/14/24, 4:13 PM

Trueee

Aabhishek awasthi okaayy ... but whats the hub you are using .. share its name and ... voltage obv...

Obamator•3/14/24, 4:15 PM

So ive tested this one https://www.reichelt.de/usb-2-0-4-port-micro-usb-otg-hub-schwarz-sert-125150-p242767.html?PROVID=2788 but there ive had some power issues and the same problem and now i am using https://www.amazon.de/chenyang-Adapter-Galaxy-S5-i9600-Note3-N9000-Handy-Tablet/dp/B00S6GQHWU/ref=asc_df_B00S6GQHWU/?tag=googshopde-21&linkCode=df0&hvadid=670524071912&hvpos=&hvnetw=g&hvrand=15810251273478631799&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9043267&hvtargid=pla-823664447010&psc=1&mcid=ed6d93999b6939309c52672e76458efc&th=1&psc=1 from my dad idk

Elektronik und Technik bei reichelt elektronik günstig bestellen

SERT 125150 - USB 2.0 4-port Micro USB OTG Hub schwarz

Dieser USB Hub mit Micro USB Anschluss kann sowohl an einem Raspberry Pi Zero, als auch an einem Smartphone / Tablet mit Micro USB Anschluss (OTG Funktionalität und OS-Unterstützung vorausgesetz [...]

Chenyang Micro USB Host OTG 3 Port Hub Adapter Kabel mit Strom für ...

Micro USB Host OTG 3 Port Hub Adapter Kabel mit Strom für Galaxy S5 i9600 Note3 N9000 Handy & Tablet Kann Maus oder Tastatur oder Flash-Disk oder Kartenleser anschließen. Kann zwei USB-Geräte verbinden und gleichzeitig arbeiten. Unterstützt nur FAT32-Festplattenformat für Android-Systeme. Kompati...

Obamator•3/14/24, 4:15 PM

Uhh

Obamator•3/14/24, 4:15 PM

Sorry i am german

Ttechielew This is a good one. What do you say, @Umesh Lokhande. Can we work this into the ...

Umesh Lokhande•3/14/24, 5:50 PM

Sure. In the future, we'll cover the use of Watchdog timer in MCU firmware development in EH Hour

Camila_99$$•3/14/24, 6:52 PM

Good evening guys ,
I have a PCB inside a waterproof box outdoors, and it's happened twice in a few months that I've had a short circuit because of metal filings.

Do you have any recommendations or solutions to isolate my board, add protection??

kristof-at-embeetle•3/14/24, 7:39 PM

JLCPCB has an option to cover your PCB in a protective coating

kristof-at-embeetle•3/14/24, 7:39 PM

I never did it, but I think it's some kind of epoxy

Kkristof-at-embeetle I never did it, but I think it's some kind of epoxy

Albaphet soup•3/14/24, 8:53 PM

Like as a solder mask? Or everythings epoxied down

kristof-at-embeetle•3/14/24, 8:54 PM

An epoxy liquid is poured on the assembled PCB

kristof-at-embeetle•3/14/24, 8:54 PM

Then solidifies

Albaphet soup•3/14/24, 8:54 PM

I see i see

Wwafa_ath Hello, can you help me choosing the right sensor of ligne following and color de...

aymen ammari•3/14/24, 9:07 PM

I've worked with tcs34725 before it give good results but it can be effected a lot with day light or indoor light, and you have to reprogram your MCU, so... I don't recommend it, I haven't worked with the other you can try it

Kkristof-at-embeetle JLCPCB has an option to cover your PCB in a protective coating

Camila_99$$•3/14/24, 9:19 PM

I think it could be exactly what I need

Camila_99$$•3/14/24, 9:19 PM

Thank u

Kkristof-at-embeetle An epoxy liquid is poured on the assembled PCB

techielewOP•3/14/24, 9:21 PM

https://www.linkedin.com/posts/baly-lee-6437b11bb_soldering-smtpcb-pcbassembly-activity-7170253853983006720-Bzia?utm_source=share&utm_medium=member_desktop

Baly Lee on LinkedIn: #soldering #smtpcb #pcbassembly #electronicma...

Beyond Adhesion Protecting Electronics with Potting Glue
Learn more: https://lnkd.in/gsrxTznh
#soldering #smtpcb #pcbassembly #electronicmanufacturing… | 35 comments on LinkedIn

CCamila_99$$Good evening guys , I have a PCB inside a waterproof box outdoors, and it's happ...

aymen ammari•3/14/24, 9:40 PM

You can cover it with resin epoxy it's more affordable, you just mix it and pour it in the box, don't worry anymore about over heating or short cercuit, yes you won't be able to see or work on it but it will work out, tell me what you think

Camila_99$$•3/14/24, 11:38 PM

Thank u @aymen ammari

aymen ammari•3/14/24, 11:38 PM

Saßì•3/15/24, 3:38 AM

@ayama Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/15/24, 3:39 AM

@Bacon Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/15/24, 8:05 AM

@nickk Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

GrimReaper0304•3/15/24, 9:14 AM

Hi guys, i was looking for a device based on ESP32, that can do Chat, File transfer, Voice and Video call between ESP to ESP only. Is it feasible or do i have to look at other MCUs?