Hey @kingrom, you'll found multiple examples on the idf epo, please take a look, https://github.com/

Hey @kingrom, you'll found multiple examples on the idf epo, please take a look, https://github.com/espressif/esp-idf/tree/master/examples

GitHub

esp-idf/examples at master · espressif/esp-idf

Espressif IoT Development Framework. Official development framework for Espressif SoCs. - espressif/esp-idf

Bboualleg sabrina guys can you suggest to me an environmental project using stm32 with Ai

wafa_ath•3/19/24, 8:24 AM

I suggest doing soil analysis using NPK sensor with stm32 and analyst the data with machine learning models... That would be great project

Bboualleg sabrina guys can you suggest to me an environmental project using stm32 with Ai

aymen ammari•3/19/24, 8:26 AM

I suggest something related to agriculture and plants as wafa said

aymen ammari•3/19/24, 8:31 AM

Or How about building a smart plant disease detection system using STM32, You could integrate image processing capabilities into the STM32 microcontroller using a lightweight AI model, such as a convolutional neural network (CNN). The system could be equipped with a camera to capture images of plant leaves, and the STM32 would analyze these images in real-time to detect signs of diseases or pests. Depending on the detected issues, the system could trigger alerts, provide recommendations for treatment, or even autonomously administer treatments such as spraying pesticides or applying fertilizers. This project combines the power of AI for image recognition with the real-time processing capabilities of the STM32 microcontroller to aid in crop protection and management

Yyoucef_ali Hey @kingrom, you'll found multiple examples on the idf epo, please take a look,...

Donald Will•3/19/24, 9:32 AM

Thank you for the source. Do you have project base example ?

DDonald Will Thank you for the source. Do you have project base example ?

youcef_aliOP•3/19/24, 9:36 AM

you can start with this sample programme of lvgl, you'll find LVGL and Freertos combined, I usggest that you start with this ti get fammilar with esp-idf and lvgl: https://github.com/lvgl/lv_port_esp32/tree/master

GitHub

GitHub - lvgl/lv_port_esp32: LVGL ported to ESP32 including various...

LVGL ported to ESP32 including various display and touchpad drivers - lvgl/lv_port_esp32

MMarvee Amasi So I heard about this watchdog timer thing, with lots of processes, it's kinda ...

Joseph Ogbonna•3/19/24, 10:01 AM

In an RTOS, use the watchdog timer to monitor tasks' execution. Each task should periodically reset the watchdog timer to prevent it from timing out. If a task fails to reset the timer within its allotted time, it indicates a fault, triggering appropriate error handling. Sending signals with task IDs could aid in identifying which task caused the watchdog timeout, improving debugging.

Bboualleg sabrina guys can you suggest to me an environmental project using stm32 with Ai

Camila_99$$•3/19/24, 10:16 AM

Hi Sabrine i suggest you to develop a handheld water quality tester with STM32 that measures parameters like pH.

Camila_99$$•3/19/24, 10:18 AM

And use Ai algorithms to analyze the data and provide instant feedback on water quality.

Camila_99$$•3/19/24, 10:29 AM

Morning everyone

I am trying to control a set of relays with the GPIO of an esp8266. I have installed espeasy, and I can control the GPIO with an HTTP command. I would like to be able to do this with MQTT. My broker is a Raspberry Pi, and the test signals are passing well with the protocol. Now, I would like to achieve this with espeasy without using Jeedom or other home automation assistants.
Has anyone tried this before????Because I can’t find any tuto similar to my project.

CCamila_99$$Morning everyone 😌 I am trying to control a set of relays with the GPIO of an e...

wafa_ath•3/19/24, 11:43 AM

Morning camila ,as much i understand maybe using firebase for hosting the data and with this u can use mqtt

CCamila_99$$Morning everyone 😌 I am trying to control a set of relays with the GPIO of an e...

boualleg sabrina•3/19/24, 1:45 PM

I think you can do it without home automation assistants

Bboualleg sabrina I think you can do it without home automation assistants

Umesh Lokhande•3/19/24, 2:00 PM

Yes, I agree with @boualleg sabrina. If RPi is running MQTT broker s/w and acting as an IoT Server. Then connect your home devices as a client and control them. This way you can avoid all third-party services. The only limitation is you won't have access from outside of your home network. There is a way out but I'd not recommend RPi to make it public access for security reasons.

Camila_99$$•3/19/24, 2:04 PM

But what do you think about Tosmota ?

CCamila_99$$But what do you think about Tosmota ?

Umesh Lokhande•3/19/24, 2:13 PM

Maybe it's good. I haven't tried any pre-built home assistant

CCamila_99$$But what do you think about Tosmota ?

boualleg sabrina•3/19/24, 2:21 PM

I don't have a clear idea about it but I'll look for more informations.

Camila_99$$•3/19/24, 2:28 PM

Yeah ok

Camila_99$$•3/19/24, 2:28 PM

Thank you guys

JJoseph Ogbonna In an RTOS, use the watchdog timer to monitor tasks' execution. Each task should...

Marvee Amasi•3/19/24, 3:07 PM

Oh thanks so much , I have figured it out now

Saßì•3/19/24, 4:34 PM

Friendly reminder about Upcoming Event
ABOUT TO DISCUSS ON

When to Use an OS/RTOS
https://discord.com/invite/DPGdgr73?event=1218923815371935874

Ttechielew Hi Al Aqel, welcome! Great to learn your interests! Well I’m not sure how extens...

Al•3/19/24, 11:04 PM

Thank you so much for the feedback. I'm looking to dive into

Low level drivers for hardware in general to work with something like a linux distro
Re-imagining how those drivers are visualised and shown to average users

Yyoucef_ali you can start with this sample programme of lvgl, you'll find LVGL and Freertos ...

Donald Will•3/20/24, 1:55 AM

Hi , actually i am done port the esp32 to lvgl but i am not familiar how to display the flow sensor reading to display concurrently need to handle lvgl. The flow sensor is sending the hex code it interface with esp32-s3 via modbus how can i handle the reading and display it on the tft display ?

Accur4te•3/20/24, 2:11 AM

Is there any good and robust alternatives to relays ? I am trying to deploy and system in a Harsh environment but my replay are stoping after certain time cause of rusting and many other factors can anyone suggest an alternative?

Saßì•3/20/24, 4:25 AM

@Jamin Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/20/24, 4:26 AM

@RahulKhedkar Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/20/24, 4:28 AM

@Samsug Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/20/24, 4:28 AM

@Jamin Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/20/24, 4:29 AM

@kirkle Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Saßì•3/20/24, 4:29 AM

@stylefox Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

AAccur4te Is there any good and robust alternatives to relays ? I am trying to deploy and ...

Umesh Lokhande•3/20/24, 5:18 AM

Check with Solid State Relays and Optocoupler ICs which may help you in harsh environments where you've electrical noise or high-voltage spikes

gKarthikSai•3/20/24, 5:47 AM

Hello everyone......I have a MacBook so can't install vivado design suit (not available for Mac and it's like 300gb I don't have the storage for it ), I'm using eda playground on web

gKarthikSai•3/20/24, 5:50 AM

Any good utube tuts for the same

UUmesh Lokhande Check with *Solid State Relays* and *Optocoupler ICs* which may help you in hars...

Accur4te•3/20/24, 5:51 AM

ok thanks i will give it a try

Manuel•3/20/24, 6:02 AM

In vivados xdc-files, is it possible to do calculations? So e.g. instead of providing a clock period I could provide the frequency and calculate the period from it?

MManuel In vivados xdc-files, is it possible to do calculations? So e.g. instead of prov...

techielew•3/20/24, 6:31 AM

@Navadeep dyk?

GgKarthikSai Hello everyone......I have a MacBook so can't install vivado design suit (not av...

Marvee Amasi•3/20/24, 6:44 AM

@gKarthikSai hi , If Vivado Design Suite isn't available for your Mac, and you don't have the storage for it anyway, you're doing the right thing by using EDA Playground online. Keep using it for your design needs

MManuel In vivados xdc-files, is it possible to do calculations? So e.g. instead of prov...

Navadeep•3/20/24, 7:10 AM

yes, this is something very possible. In your example, you can be -divide_by like this

reference(chapter 3): https://www.xilinx.com/support/documents/sw_manuals/xilinx2022_1/ug903-vivado-using-constraints.pdf

NNavadeep yes, this is something very possible. In your example, you can be -divide_by lik...

Manuel•3/20/24, 7:16 AM

Oh, no I don't want to derive a clock from another, but do actual calculations where the result can be stored to a variable. Using this for a clock was just an example.

Navadeep•3/20/24, 7:26 AM

Okay, I don't see a way to do math operations like that and variable assignments within .xdc

Manuel•3/20/24, 7:30 AM

Ok, I feared that there is no way. Thanks nonetheless

DDonald Will Hi , actually i am done port the esp32 to lvgl but i am not familiar how to disp...

youcef_aliOP•3/20/24, 7:39 AM

Did you already connect your sensors with your board and are you receiving data from your sensor ?

Yyoucef_ali Did you already connect your sensors with your board and are you receiving data...

Donald Will•3/20/24, 7:40 AM

Is a hex code

youcef_aliOP•3/20/24, 7:42 AM

Would you please share it with us

Yyoucef_ali Would you please share it with us

Donald Will•3/20/24, 7:57 AM

may i know how to display the flow sensor reading to the display via lvgl gui framework ?

DDonald Will may i know how to display the flow sensor reading to the display via lvgl gui fr...

youcef_aliOP•3/20/24, 8:00 AM

But first you need to extract data from your hex code, put it in a variable and display it,

Saßì•3/20/24, 8:10 AM

@stylefox Welcome! Can you let us know a bit about your technical background, what brings you to DevHeads, and what you're looking to learn/contribute?!

Yyoucef_ali But first you need to extract data from your hex code, put it in a variable and ...

Donald Will•3/20/24, 8:22 AM

But i need to concurrent to display the data and reading the flow rate do i need to set task 1 for lvgl and task 2 for reading the sensor in a freertos environment

youcef_aliOP•3/20/24, 8:25 AM

Yes I suggest first ensure that you are reading the right value, ensure each task separately and combine everything together

Yyoucef_ali Yes I suggest first ensure that you are reading the right value, ensure each tas...

Donald Will•3/20/24, 8:35 AM

i am very new to freertos do you have any example code or project ?

DDonald Will i am very new to freertos do you have any example code or project ?

youcef_aliOP•3/20/24, 8:43 AM

Check this video https://youtu.be/Yhg9maZjqiw?si=j4Icy-EpzxjJpUQp

YouTubeOL Workshop

ESP-IDF#6: Part-1 | Creating a FreeRTOS task on ESP32 | ESP-IDF |...

#espidf #esp32 #task #freertos

Part -2 here:
https://youtu.be/2Bjbg9UK4N4

youcef_aliOP•3/20/24, 11:37 AM

In Zynq SoC the DMA is writing in memory with big-endian there is a way to change it to little endian, i found big trouble locating my header in a memory when is written in different memory case

Hey @kingrom, you'll found multiple examples on the idf epo, please take a look, https://github.com/

Similar Threads

Similar Threads

Similar Threads