Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pin connector so I can

Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pin connector so I can turn the base around ( cut off etc to the front) otherwise my stick is backwards....

Mmark turner Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pi...

walmis•4/2/24, 12:03 PM

It's easy, just undo those two screws and rotate the socket. The cable inside might not let it lift up, so you might need to open the leather cover to feed in the cable a bit.

KKowalsky Guys, quick question. I got TM Hornet stick, but "CMS press", button 19 is not r...

walmis•4/2/24, 12:03 PM

Other buttons work fine?

Wwalmis Other buttons work fine?

Kowalsky•4/2/24, 12:04 PM

Yes, rest is fine. I've played with grip selection settings but no joy.

walmis•4/2/24, 12:06 PM

No clue, sounds like it could be a wiring issue/fault in the grip itself for that particular input.
It should just work.

Kowalsky•4/2/24, 12:06 PM

I know this from TM manual but I'm not sure if it's the same case with Rhino

walmis•4/2/24, 12:07 PM

could enable the "debug" grip and check if any data changes in the Debug tab window when you depress that button?

Wwalmis could enable the "debug" grip and check if any data changes in the Debug tab win...

Kowalsky•4/2/24, 12:07 PM

Will do

Wwalmis could enable the "debug" grip and check if any data changes in the Debug tab win...

Kowalsky•4/2/24, 12:11 PM

Nothing

Wwalmis It's easy, just undo those two screws and rotate the socket. The cable inside mi...

mark turnerOP•4/2/24, 12:13 PM

OK, figured itt out....

mark turnerOP•4/2/24, 12:14 PM

I had to unclip the connector to lift the plate out enough to rotate it.....

walmis•4/2/24, 12:15 PM

You need to push the cable into the tube

mark turnerOP•4/2/24, 12:16 PM

Just worked that out, cheers walmis...

KKowalsky Nothing

walmis•4/2/24, 12:18 PM

Dunno then, grip doesn't report it for some reason. I can confidently say it's not a problem on the Rhino's side, though

Wwalmis Dunno then, grip doesn't report it for some reason. I can confidently say it's n...

Kowalsky•4/2/24, 12:19 PM

Copy, thanks for help. I will try to replace it.

DuraCell•4/2/24, 2:44 PM

Any tips for my question for ac adapter disconnecting easily. Am I the only one with this issue as there is no one saying anything. Usb adapter is not loose but ac adapter is kinda loose I tied wire down below around my mount so usually it is nit dissconnected but it happened now in last few weeks 2-3 times that during usage wire dissconnects from vibrations I guess. Very frustrating spec when I was playing in VR and just all of a sudden stick goes limp.

DDuraCell Any tips for my question for ac adapter disconnecting easily. Am I the only one ...

walmis•4/2/24, 2:50 PM

Can you make a short vid demonstrating how loose it is?

mark turnerOP•4/2/24, 3:59 PM

Is there a way to offset the grip slightly ( twist it slightly to the left to allow for me mounting it centrally and using my right hand ) In my other simpit, I was using an extension and could turn it using that. In this pit, I am not using an extension. I cant angle the base either due to using the mounting plate which sits at a right angle on a cross member.

Fr4Ged•4/2/24, 4:42 PM

depends on the grip I guess.
you can fasten the Virpil Constellation Alpha however you want to

DuraCell•4/2/24, 6:16 PM

Wwalmis Can you make a short vid demonstrating how loose it is?

DuraCell•4/2/24, 6:16 PM

Here is is

Fierce_Fire•4/2/24, 6:33 PM

isnt that not in all the way?

Fr4Ged•4/2/24, 6:34 PM

my cable isn't that much different. my plug goes in 3/4 of they way but it does not wiggle that much.
I did not force wiggle it like you did though.

DuraCell•4/2/24, 6:37 PM

it is all the way in

Fr4Ged•4/2/24, 6:38 PM

exactly

Fr4Ged•4/2/24, 6:39 PM

your connector looks to be worn out a bit though.
did you pull the cord or something?

DuraCell•4/2/24, 6:40 PM

there is around 3 mm more but I cant put it in more and it just slides out easily and wiggles like that from day 1, thought that is weird from the start but started bothering me now once it dissconect during play even tough I secured the wire so it dosen't get pulled

DuraCell•4/2/24, 6:41 PM

if it looks worn its only looks like that in vid it is pristine

FFr4Ged your connector looks to be worn out a bit though. did you pull the cord or somet...

DuraCell•4/2/24, 6:42 PM

where does connector looks worn?

DuraCell•4/2/24, 6:43 PM

As I said it is same feeling of connection from day 1

DuraCell•4/2/24, 6:43 PM

it is not all the way in, wiggles and slides out easily

Fr4Ged•4/2/24, 6:44 PM

the socket has some metal springs keeping the plug tight. mine does not wiggle that much.
but you are as deep in as possible.
the plug is just longer than the socket is.

Number481•4/2/24, 6:48 PM

looks like these little spring tabs need to be bent back out a little to create some tension on the outer plug barrel

DuraCell•4/2/24, 6:53 PM

So Should I try and bend them a bit?

Number481•4/2/24, 6:56 PM

its what I would try... but I've also never been a very good role model so....

DuraCell•4/2/24, 7:00 PM

Ok helped a bit I think still loose but less slidy feel I think It will be fine will see after some testing.

Vitalii Muravytskyi•4/2/24, 7:56 PM

Hi @walmis , I have received a DIY kit and trying to connect everything together. WebUSB connects well and I can move a point (one axis is reversed) but Configurator app says USB: Disconnected and both motors offline. Tried a different cable - no luck. Joystick is detected by Windows once I plug the USB in.

smitty•4/2/24, 8:10 PM

did you hook up 20V power?

VVitalii Muravytskyi Hi @walmis , I have received a DIY kit and trying to connect everything together...

walmis•4/2/24, 8:11 PM

Sounds like windows serial driver is not functioning. Which Windows version are you using?

Wwalmis Sounds like windows serial driver is not functioning. Which Windows version are ...

Vitalii Muravytskyi•4/2/24, 8:23 PM

I use Win10, 20V Power is connected
Weird, but I can even bind controls in Condor2 sim to Rhino

Vitalii Muravytskyi•4/2/24, 9:15 PM

After creating and executing .bat file for launching with

-serial

-serial

option everything seems fine now.

Mmark turner I had to unclip the connector to lift the plate out enough to rotate it.....

OZ67•4/3/24, 9:18 AM

I just turned the plug around on the stick not the Rhino base , but that was with thrustmaster, yours maybe different situation.

NNumber481 Were you able to get the new version started with only the pedals selected in th...

yzhanping•4/3/24, 12:04 PM

This method is really good and solved my problem. Now the software is working fine

BigBANGtheory•4/3/24, 4:56 PM

hey everyone I came across an issue today in DCS Apache (could relate to other modules) with the force trim... what I noticed is if I set an axis tune S curve on the cyclic it messes with the FFB effects when you trim release (set a new trim position). The joystick and ffb want to return your stick to the centre by a small amount, the physical centre not the trimmed position. When I remove the curves within DCS to linear the Rhino and ffb behaves as I would expect with the spring accepting the new centre.... Is this normal or am I doing something wrong?

BBigBANGtheory hey everyone I came across an issue today in DCS Apache (could relate to other m...

Number481•4/3/24, 5:23 PM

it is normal. Axis curves are not compatible with FFB

BigBANGtheory•4/3/24, 8:26 PM

ty @Number481 that is very useful information

plehmann•4/4/24, 1:14 AM

not too sure if this is the correct channel ...but...

plehmann•4/4/24, 1:14 AM

DEfender just spazzed out and nuked telemffb

plehmann•4/4/24, 1:15 AM

plehmann•4/4/24, 1:17 AM

another in a long line of defender sapazzes I guess from praydog UEVR and github trojans its all been a bit of a mess recently ( praydog takes pancake games to VR in openXR) really cool...but I digress... anyone else have this happen ? I've put and exclusion now into defender for the telem location.

Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pin connector so I can

Similar Threads

Similar Threads

Similar Threads