KI can give it a shoot, how exactly should I do that?
KI have the same PSU as in stock Rhino, Green Cell PRO 19V 9.5A 180W
WYou'd need to measure if 20V is coming to the FFB board with a multimeter
WAlso if there's no LED indication under the motor covers it is most likely power issues
KI can see green led light inside
WI suspect what youre seeing is most likely from the FFB board
WYou'd need to open it up to check
KOk, understood
YDoes vpc mongoose "cm1" supported by rhino?
Y
KOk, issue fixed. It was broken DC socket not giving + to the emergency button and the ffb board. It must fried itself yesterday. Thanks Walmis and @SR-FWinger[73]_David for all the help and support tracking that issue 
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
Syoure very welcome. now good flying again:)
Sall VPC grips are supported.
Also all TM grips.
VKB with adapter and also Winwing with adapter
Also all TM grips.
VKB with adapter and also Winwing with adapter
Sat least i got this info. please correct me if i am wrong;)
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
Yyep i have 2 alphas and 2 TM grips just wondered if the older VPC stick will work due its not listed
Sahh i get it. Walmis will have the answer. Wild guess: it whould work..
WYeah, it should work.
SI'm trying to get my preorder # for my Rhino and ship date for my VKB adapter order #907 from the bot but am only getting this response: "Sorry, I don't know what you mean, try !help" How do I get the bot to understand my request?
SIs it safe to keep the Rhino base connector for the grips unscrewed?
This is in the context of static connector on grips such as TMs and RealSimulators, where the mini-din does not stretch out or rotate. I had some damaging consequences when pairing a static connector (like the Rhino) with a static grip connector (like the Realsim/TM grips).
This is in the context of static connector on grips such as TMs and RealSimulators, where the mini-din does not stretch out or rotate. I had some damaging consequences when pairing a static connector (like the Rhino) with a static grip connector (like the Realsim/TM grips).
Fwell, try the !help command and do as the bot says.
you basically want to use the "!info [your e-mail adress]" command.
you basically want to use the "!info [your e-mail adress]" command.
SJust checked my email and now have tracking # for 907. Thanks!
FI received the new parts for replacement. Thx you very much.
SI would like to find an extension to use with the VPForce VKB adapter. It looks as though the VPC 50/75/100mm adapters might be useable for that purpose. Can anyone confirm that those extensions will accept the VKB adapter threads for mounting to the Rhino?
AI can't confirm, but the Rhino already basically has a built-in extension so if you haven't I suggest you make some actual measurements to make sure you actually need an extension
WYeah, VKB adapter will go on VPC extension without problem
SThanks!
SHas anyone had a problem where you get charged twice at payout?
Shey all, I know for sure I have seen people talk about this before however my brain can't find anything searching for it.
My question is under what setting in the configurator would cause the stick to wobble back and forth as its trying to recentre itself - I have found reducing the spring gain slows it down but i've definitely touched something months ago and can't remember what it was. sometimes now the stick will exponentially wobble itself out of control.
My question is under what setting in the configurator would cause the stick to wobble back and forth as its trying to recentre itself - I have found reducing the spring gain slows it down but i've definitely touched something months ago and can't remember what it was. sometimes now the stick will exponentially wobble itself out of control.
YHow does the shift register board work ? Is it plug and play? Does it have axis outputs?
WIt connects to the 5 pin grip connection and allows to wire up to 32 buttons
WI'd recommend loading up the default Rhino configuration - it's included in
configs directory with the configuratorYThanks is there any simple small board with at least 3 axis small enough to fit into grip supported by the base ? Im trying to avoid external wiring
WIt's possible via a microcontroller https://discord.com/channels/965234441511383080/1185807510993637386
YThat's fantastic thank you !
Wsuper random question
Wlooking at the website (I know nothing) there are two or one motors offered in a bundle
WIm guessing the motors are rotary ones, so two are needed for 4 axis?
Fthere are only 2 axes in a joystick. x and y.
FThe single motor is for diy FFB pedal mods
Wohh, thank you :)
CHi guys, im strugling with a strange situation on MSFS Fenix A320. When im move the stick on aileron axis the aircraf have a tendency to virtualy center the sidestick and back to normal position in fraction of seconds. Theres no other devices controlling aileron or pitch axis. Im really dont know wqhat is happening. This issue occurs only when TelemFFB is enabled.
EHi all, I have a weird problem with the Viggen in DCS. This only happens with the Viggen. Trim commands seem to move the stick to the opposite side. in the aircraft, the trim works as intended (left trim moves the stick towards the left) however, the stick moves to the right, which counteracts the trim in the aircraft by physically moving the stick to the opposite side. So any trim input will be nullified by the opposing forces between the aircraft stick, and the physical stick. help?
JEverything else work?
WMaybe you need to invert the trim in FFB tune menu in DCS
MYes, the VIggen is the only one in DCS where I had to invert FFB axis in DCS options
EThis worked. Thank you!
S@walmis is it possible to turnaround one (not both) of the connector plugs on the winwing adapter 180°?
I@walmis The fan on the Rhino goes ON very loud sometimes, is this ok? Sound does not bother me, I have headphones, just want to know if something can get damaged with the Rhino.
WNo, any reason to rotate them? The winwing grip has a free cable in the grip
WYeah, those fans can be a bit whiny, I'll add some tuning in the future to quiet them down a bit