DevHeads IoT Integration Server•2y ago

I already have one i'm looking for an other one

Yyoucef_ali I already have one i'm looking for an other one

Navadeep•4/22/24, 6:10 PM

what is not in this are you looking for?

youcef_aliOP•4/22/24, 6:12 PM

Zed board is expensive, i'm looking for 1 considerable board price

Okpara Elvis•4/22/24, 6:20 PM

I am Elvis Embedded software Engineering(beginner)

I hope am welcomed here

OOkpara Elvis I am Elvis Embedded software Engineering(beginner) I hope am welcomed here

nour_oud•4/22/24, 6:36 PM

Welcome @Okpara Elvis

OOkpara Elvis I am Elvis Embedded software Engineering(beginner) I hope am welcomed here

Joseph Ogbonna•4/22/24, 7:09 PM

Your welcome.

Yyoucef_ali Zed board is expensive, i'm looking for 1 considerable board price

techielew•4/22/24, 7:17 PM

What's the price range? Unfortunately any zynq dev board isn't going to be cheap...

Mahmoud Hafez•4/22/24, 7:55 PM

I am Mahmoud ,I am student

MMahmoud Hafez I am Mahmoud ,I am student

Camila_99$$•4/22/24, 8:31 PM

Welcome Mahmoud

Ttechielew What's the price range? Unfortunately any zynq dev board isn't going to be cheap...

youcef_aliOP•4/22/24, 10:16 PM

Arround 200$

Yyoucef_ali Arround 200$

techielew•4/22/24, 11:16 PM

Looked into Kria? There are versions that get close to your price point..

Saßì•4/23/24, 3:24 AM

@Okpara Elvis @Maria BENMAMMAR @ahmeddrioueche Hi, welcome to the community! We'd love to hear more about you. Could you introduce yourself and share your profession with us?

MQ-FAE•4/23/24, 6:02 AM

Hello, I made some arm64 board with open source BSP, which channel can post relate information? thx

electro_coco•4/23/24, 6:23 AM

has anyone doing freelance embedded work sucessfully on fiver or upwork i am failling to crack that

Eelectro_coco has anyone doing freelance embedded work sucessfully on fiver or upwork i am fai...

techielew•4/23/24, 11:14 AM

I was actually just looking for an embedded engineer yesterday at on upwork. It works but I assume you hey the top rated pros are actually consultancies and customers don’t usually get further than the first few. Probably hard to break in. Start with a niche and expand?

MMQ-FAE Hello, I made some arm64 board with open source BSP, which channel can post rela...

techielew•4/23/24, 11:16 AM

That’s awesome! You can put in #projects-and-self-promotion if you’re just wanting to share that you did it or the #mcu-mpu-and-firmware forum if you have a discussion topic.

Looking forward to it!

Ttechielew I was actually just looking for an embedded engineer yesterday at on upwork. It...

electro_coco•4/23/24, 11:36 AM

I dont know the field of embedded is very different skills i have are always different that what customer wants
It cannot be like oh i am a graphics designer or web designer where you do almost same work for everyone
Btw you can hire me i am jobless right now

Eelectro_coco I dont know the field of embedded is very different skills i have are always dif...

techielew•4/23/24, 11:51 AM

That’s why I think some of the top freelancers on upwork for example are probably consultancies. They list a super broad range of skills across many architectures.

Ttechielew That’s why I think some of the top freelancers on upwork for example are probabl...

electro_coco•4/23/24, 11:53 AM

Exactly a single individual cannot compete with them

Eelectro_coco Exactly a single individual cannot compete with them

techielew•4/23/24, 11:54 AM

That’s why I say pick something niche to start (if you have a super niche skill you can market). Then gain some visibility in the platform and start adding in your more general skills.

Eelectro_coco Exactly a single individual cannot compete with them

techielew•4/23/24, 11:54 AM

What’s your “background” or “skillset” that you are trying to market?

Ttechielew What’s your “background” or “skillset” that you are trying to market?

electro_coco•4/23/24, 11:56 AM

Well i can do bare metal c c++ also python as well
But those dont put food on table
Designed few pcb as well but people already are fighting over pcb design
I have given up on freelance market and hate it almost
I was rated level two on fiverr until a bad customer gave very bad review and fiverr algo punished me very very hard and profile went down ever since

electro_coco•4/23/24, 11:57 AM

Sensor integration
Algo iot esp32 arduino stm32

electro_coco•4/23/24, 11:57 AM

Pcb design with emc and emi controlled

Eelectro_coco Well i can do bare metal c c++ also python as well But those dont put food on t...

techielew•4/23/24, 11:59 AM

Have you done any RTOS work (FreeRTOS, Zephyr, etc?)

electro_coco•4/23/24, 11:59 AM

FreeRtos yes

electro_coco•4/23/24, 11:59 AM

Zeyphr gave it try but its Linux based structure confuses me i have to learn it

Eelectro_coco FreeRtos yes

techielew•4/23/24, 12:01 PM

Want to do some FreeRTOS demos for the community? We can start at basic and work our way forward. Could be a good way to market yourself/skillset.

Ttechielew Want to do some FreeRTOS demos for the community? We can start at basic and work...

electro_coco•4/23/24, 12:01 PM

I was thinking of start twitch stream about rtos and other stuff

techielew•4/23/24, 12:01 PM

We started some of these with Umesh and Navadeep and Petr, then Embedded World blew up the schedule, but now picking back up.

Eelectro_coco I was thinking of start twitch stream about rtos and other stuff

techielew•4/23/24, 12:02 PM

If you want to do it with DevHeads we’re happy to support with resources etc

techielew•4/23/24, 12:02 PM

We can also promote

Ttechielew If you want to do it with DevHeads we’re happy to support with resources etc

electro_coco•4/23/24, 12:02 PM

Ok you can guide me about it

Eelectro_coco Ok you can guide me about it

techielew•4/23/24, 12:03 PM

Sure I’ll DM you a little later today or tomorrow

electro_coco•4/23/24, 12:03 PM

techielew•4/23/24, 12:12 PM

Hi all,
Since we made a bunch of updates to the server last week we want to get a feel for how everyone is doing with them. So, we've created a form for you to leave your feedback/suggestions. More in the #announcements channel: https://discord.com/channels/1130679493799977062/1130679493799977066/1232302580147945482

We're looking forward to hearing what you think!

Iinfo3917 Hi , Myself Dileep , can anyone provide me with information or video content on ...

Umesh Lokhande•4/23/24, 12:42 PM

Heres YT Channel to learn

OpenCV

OpenCV

Cascades Model

Cascades Model

Algorithm

Algorithm

, and other topics around, image and video processing. Visit https://www.youtube.com/@PyImageSearch/videos. You may find this useful.

YouTube

PyImageSearch

PyImageSearch is your go-to resource for understanding and mastering topics relating to machine learning, deep learning, and computer vision. We cover various topics, from OpenCV functionalities to the most recent research advancements in Deep Learning. All our tutorial articles and the discussed code are FREE on our website: https://www.pyimage...

wafa_ath•4/23/24, 4:46 PM

Good afternoon. Am getting alot of ads lately from flux (for designing PCB ) they said they use AI and make it easier, did anyone tried it before... What do u think about it . @PCB & Analog

Francis_Victor•4/23/24, 5:03 PM

Hello beautiful people

Saßì•4/23/24, 5:06 PM

@Francis_Victor @Firazol Hi, welcome to the community! We'd love to hear more about you. Could you introduce yourself and share your profession with us?

Francis_Victor•4/23/24, 5:09 PM

Hello beautiful people, my name is Victor Francis, I am skilled in IoT, web development, Machine learning anr embedded systems just to name a few. I am one of the engineers working on the first African humanoid robot and am excited to be in this community. I look forward to collaborating and making friends here

FFrancis_Victor Hello beautiful people, my name is Victor Francis, I am skilled in IoT, web deve...

Saßì•4/23/24, 5:12 PM

We are so glad for your presence here !! Looking forward to see you in our office hours event !!

Saßì•4/23/24, 5:13 PM

Friendly reminder about Upcoming Event
Save the Time & Date
https://discord.com/invite/HSwM5TJ4?event=1230955938043789334

FFrancis_Victor Hello beautiful people, my name is Victor Francis, I am skilled in IoT, web deve...

techielew•4/23/24, 8:20 PM

@Francis_Victor you have to share us a link/details to the African humanoid robot! We're super happy to have you and your expertise in server!

Wwafa_ath Good afternoon. Am getting alot of ads lately from flux (for designing PCB ) the...

Joseph Ogbonna•4/23/24, 8:52 PM

Haven't tried it yet, but with the reviews am seeing, it's amazing Indeed

techielew•4/24/24, 4:03 AM

@Event Pings, ahead of our next raffle announcement we've got a couple server activities!

First, a weekly coding challenge:

✅-code-reviewCoding Challenges < C >

techielew•4/24/24, 4:04 AM

Next, is a poll, as well as a clue, about the future of DevHeads! So, pick your favorite DevKit! @Giveaway Pings

https://discord.com/channels/1130679493799977062/1199293807737450538/1232541420787732570

Ttechielew @Event Pings, ahead of our next raffle announcement we've got a couple server ac...

techielew•4/24/24, 4:05 AM

Now we wait and see.. :monkaHmm:

Saßì•4/24/24, 2:06 PM

Friendly reminder about Upcoming Event
Save the Time & Date
https://discord.com/invite/HSwM5TJ4?event=1230955938043789334

Swapy•4/24/24, 3:47 PM

Saßì•4/24/24, 5:02 PM

@Swapy @�� @afranv @amr Hi, welcome to the community! We'd love to hear more about you. Could you introduce yourself and share your profession with us?

I already have one i'm looking for an other one

Similar Threads

Similar Threads

Similar Threads