S
Cyes its working for me now
Ci guess i had to wait a bit longer
Ckids these days, so impaient 
thank you for the help !
thank you for the help !
MI need to send files to my bucket, files larger than 300mb, any suggestions? I've already tried with workers and S3 api and nothing works
Cyou mean upload? I would just use rclone, which uses the S3 Compat API, works well
C
MI'm using
are these objects sorted in any way? alphabetically or maybe by
listare these objects sorted in any way? alphabetically or maybe by
uploaded field? can I request them to get sorted? (didn't find any option for that in R2ListOptions, but wanted to double check)
MI get this error:
Failed to copy: multi-thread copy: failed to write chunk: failed to upload chunk 4 with 5115088 bytes: NoSuchUpload: The specified multipart upload does not exist.
Failed to copy: multi-thread copy: failed to write chunk: failed to upload chunk 4 with 5115088 bytes: NoSuchUpload: The specified multipart upload does not exist.
IHello everyone 
Not sure if this is the best place to ask, but is there any way to know if I'm being throttled when uploading large files (between 700MB-1GB) to R2?
I'm currently making the very first backup of one of my drives and during all afternoon yesterday to today's morning I was only limited by my connection speed (between 300Mbps up to 400Mbps if ISP was feeling giving), but this morning started seeing a hard transfer speed of ~100Mbps.
I believe this is on R2 side because I can still do multiple transfers from my homelab to the internet and can see the network card speed go up to 300Mbps if necessary.
Thanks in advance
Edit: I'm using rclone btw
Not sure if this is the best place to ask, but is there any way to know if I'm being throttled when uploading large files (between 700MB-1GB) to R2?
I'm currently making the very first backup of one of my drives and during all afternoon yesterday to today's morning I was only limited by my connection speed (between 300Mbps up to 400Mbps if ISP was feeling giving), but this morning started seeing a hard transfer speed of ~100Mbps.
I believe this is on R2 side because I can still do multiple transfers from my homelab to the internet and can see the network card speed go up to 300Mbps if necessary.
Thanks in advance
Edit: I'm using rclone btw
IUploading to ENAM from Mexico, region is closest one.
I’ve played with transfers this morning, doing more transfers, more concurrent parts, less as well but didn’t work at all, I’m still only seeing 100Mbps upload speeds
I’ve played with transfers this morning, doing more transfers, more concurrent parts, less as well but didn’t work at all, I’m still only seeing 100Mbps upload speeds
ISorry, meant concurrent 
ILet me try going to 20, didn’t try that high…
ILet me check what my last command was
IIAfter playing a lot with flags, ended up with that
IWhat's the deal with
--transfers? I get that it tries handling more files, but are there any insight about the way it works?IHmm still seems to cap at around 10-11MiB/s
INot that much. Sometimes there are files in the 300-400MB range. Most of them should be in the 700MB-1GB range
IYeah, figured that leaving it work would be the only thing I could do. Hopefully it goes back up at some point during the day
IYep, Rocky Linux. 1x6TB WD Red Plus HDD (max. 180Mbps speed, but mostly sitting at ~70Mbps until a new file is opened)
IWhat would the benefit of using BBR be? I'm pretty sure it would not help any more than ISP would in the end, or will it?
II'm pretty sure it is not the disc. Load seems practically the same from what I saw last night (when transferring full speed). This is it currently
IIt's just the network that seems strangely flat to me...
IOh, sorry, it does no output (no file)
INeither of the 3
IYes. If I start uploading stuff from my homelab to any VPS (so its not my local network) in parallel with rclone uploading to R2, I can see more increased speeds coming out of my ethernet interface. Attached capture is only
enp interface so docker doesn't leak in the info
I(All those voids are me stopping rclone and trying different settings)
IAbout to reboot for BBR changes
IOh right,
sudo sysctl -pIMissed that
IYep, rclone just started transferring first file
IStill not getting over 11MiB/s 
ITransfer speeds between files just load-balance. When first file starts, it goes up to 9-10MiB/s by itself, then it starts halving as soon as new transfers start
IITIL a new command
IF
ISpeed: 100Mb/s got me curious... Checking into router (or whatever this crap ISPs give) and looks like it is indeed only detecting 100Mb/sIThere's no way it is the cable...
Cit's happened to me before on Windows, on windows you can force it to ignore the auto detected speed as well, I assume you can somehow on Linux too (but there is def a chance it's from a cable/switch/router issue, and forcing it would result in lost packets/issues)
ILooks like I can force speed negotiation on the router side, but prob finding another cable is better lol
LHi
ICable replaced, back to 1000Mb negotiation
LI need help with Cloudflare Streaming. Would anyone help me with that?
IBeen working great 
Now the thing is that rclone is only "actively" transferring up to 3 files at a time 
Now the thing is that rclone is only "actively" transferring up to 3 files at a time IAt full speed, yes, but only 3 and the other 7 stuck in "transferring" (I think this is initialization?) 
�?ata
F
LI'm working on a project where I need to upload videos to Cloudflare using JavaScript. I found a code that works fine for normal-sized videos, but I've run into an issue when trying to upload videos larger than 200 MB.
I've tried several solutions, but I haven't yet found an effective way to handle the uploading of large videos. Does anyone have an example or can you guide me on what I might be missing or how I can approach this issue?
ERROR CONNECTION
I've tried several solutions, but I haven't yet found an effective way to handle the uploading of large videos. Does anyone have an example or can you guide me on what I might be missing or how I can approach this issue?
ERROR CONNECTION
