Ok thank you, I will ask @Will3D DIY would be option, but I am not very manually capable 😂 it woul

Ok thank you, I will ask @Will3D
DIY would be option, but I am not very manually capable

it would took me months to make something with uncertain result. So I would definitely preferer to buy something ready to use.

Kkrbs Ok thank you, I will ask @Will3D DIY would be option, but I am not very manuall...

Sudeebare•5/4/24, 8:52 PM

I'd happily buy a Rhino base kit if one were cleared for shipment outside the EU, along with the motor kit currently available.

FFr4Ged a load of people don't actually end up ordering the Rhino when their time is up....

.Eagle.•5/4/24, 10:28 PM

I hopethat is true because I have 800 before me lol

.Eagle.•5/4/24, 10:29 PM

I did the math and the average amount of rhinos a week is 8 , that pulls me in 25 months wait time

Fr4Ged•5/4/24, 10:42 PM

!status

FFr4Ged !status

VPforceBot•5/4/24, 10:42 PM

Hey @Fr4Ged,
So the last Shipped RHINO is #0517 on 2024-05-03
Average waiting time from preorder to shipped is 209 days, median is 216 days, max is 407 days
505 Rhinos are shipped in total

..Eagle.I hopethat is true because I have 800 before me lol

bert•5/4/24, 11:03 PM

There are corrections to the queue sometimes, i signed up last September with position 466 and my unit was ready to ship 6 months later.

YYunacPL I've tried ACL in F14 yesterday on FFB and it's completely broken does anyone ha...

Torattacker•5/5/24, 10:04 AM

I cant use alc while using Rhione.The plane cant hold the right AOA.

krbsOP•5/5/24, 5:24 PM

I am wondering...do you have some special flight chair? I will need chair (not necessarily expensive one). Anyway it would be nice to get chair compatible with Virpil collective adapter so I can mount collective without modifications.
What chair do you have ?

Lance•5/5/24, 5:36 PM

Lance•5/5/24, 5:37 PM

So how do we figure out what position we are. I checked me email and it never told me. And i texted this bot 10 times and it just keeps saying it doesn't understand

Lance•5/5/24, 5:37 PM

Info

Lance•5/5/24, 5:37 PM

@info

Number481•5/5/24, 5:44 PM

It's not @info@info it is !info <your email>!info <your email>

Lance•5/5/24, 5:50 PM

It still doesn't understand

Lance•5/5/24, 5:51 PM

Is there not a way to find our order number somehow? It was never emailed to us?

Lance•5/5/24, 5:51 PM

I thought i screen shotted it but cant find it somehow

Fr4Ged•5/5/24, 5:52 PM

do it in a single line like shown by Number

Lance•5/5/24, 5:53 PM

I did on the first reply

Lance•5/5/24, 5:53 PM

The 2nd reply i hit the space bar

LLance I did on the first reply

Number481•5/5/24, 5:53 PM

theres no space between !info!info and your email (P.S... your email still shows in the replies by the bot in your screenshot)

Fr4Ged•5/5/24, 5:53 PM

leave space between info and mail but in one line

Lance•5/5/24, 5:54 PM

Nice

Lance•5/5/24, 5:54 PM

Lmao

Lance•5/5/24, 5:54 PM

Ok ill try again

Fr4Ged•5/5/24, 5:54 PM

I am also pretty certain that you won't get a mail about your position.
just confirmation that you are on the list and then when you are able to order.

Lance•5/5/24, 5:55 PM

Got it thanks

Lance•5/5/24, 5:55 PM

Once i hit retirement i should be able to order it looks like

Lance•5/5/24, 5:56 PM

Lance•5/5/24, 5:57 PM

Has there been any talk about maybe ffb for the new winwing pedals?

Lance•5/5/24, 5:58 PM

Just got them a couple weeks ago

AndyHill•5/5/24, 5:58 PM

the prediction is quite pessimistic, people drop out of the queue so you'll get yours probably a fair bit sooner than that

Lance•5/5/24, 5:58 PM

Yeah i definitely see how people will drop out. A lot of money for a long time away to hope you are still in the hobby lol

Lance•5/5/24, 5:59 PM

But when im 850 away and only 500 have been shipped, ( in the last 5 years?) it doesn't look the best

Number481•5/5/24, 6:00 PM

Actually, no. About 420 have been shipped in the last 12 months.

AndyHill•5/5/24, 6:00 PM

it's more like 2 years and the pace is improving

Number481•5/5/24, 6:01 PM

I got #85 at the beginning of may ‘23. And production has ramped significantly since then.

Kkrbs I am wondering...do you have some special flight chair? I will need chair (not n...

Touch_Of_Legend•5/5/24, 6:44 PM

MT sims makes the best flight chair.

https://www.mtsim.com/product-category/chairs/

NLR also makes one with its rigs

https://nextlevelracing.com/products/boeing-combat-flight-simulator/

All of those have the center stick cut out.

There are some others but mainly I’ve seen those two (NLR one is apparently not very comfy while the MT sims is highly rated but also more expensive)

MTSIM USA

Chairs – MTSIM USA

Next Level Racing

Flight Simulator Boeing Military Edition

Bozo VFA-86•5/5/24, 7:15 PM

all of them have the high back which inteferes with head movement in vr

Bob Bushman•5/5/24, 7:21 PM

With it being narrow and flat, its not an issue at all.
Compared to the usual more racing inspired gaming chairs that tend to trap you in. These encourage more manoeuvrability.
( I have the boeing one)
I honestly prefer the thin, flat, high back to the low back chair I could otherwise use.

Bozo VFA-86•5/5/24, 7:22 PM

yea i have the next level boeing style but older...f1gt...hat to cut the top off...kept hitting the back of the pimax crystal during dogfight

krbsOP•5/5/24, 7:30 PM

So do you think it is worth the money to get monster tech considering the system functionality and future additions to cockpit?

Also do you have experience with Secretlab chairs?

https://secretlab.eu/collections/gaming-chairs

Secretlab EU

All Gaming Chairs | Secretlab EU

Award-winning gaming chairs with science-backed ergonomic comfort. Trusted by global media, esports champions, and tournaments worldwide.

BBozo VFA-86 all of them have the high back which inteferes with head movement in vr

krbsOP•5/5/24, 7:32 PM

Do you think there is design better suited for VR?

Bozo VFA-86•5/5/24, 7:33 PM

https://youtu.be/9Yhc6mmdJC4?si=nxroAb5p1wcg1aAI

YouTubeGamers Nexus

Don't Buy a "Gaming Chair" - Office Chair vs. Gaming Chair Round-Up...

Gaming chairs have become prevalent, but shameless copy-pasting by most "manufacturers" has led to a stagnant industry with poor value vs. even cheap office chairs.
Sponsor: Buy Thermal Grizzly Conductonaut on Amazon (https://geni.us/1D8Eeq) or Hydronaut paste (https://geni.us/Fsray)

This video includes mini-reviews of several office chairs tha...

Bozo VFA-86•5/5/24, 7:34 PM

i have no experience with the chairs but be careful...alot of overpriced stuff out there

Kkrbs So do you think it is worth the money to get monster tech considering the system...

blave549•5/5/24, 7:54 PM

I have a SecretLab Titan XL, and would never buy one again. The first thing that happened is that the armrests' covering started to "bubble". I had to whine loudly b4 they decided to ship me new ones, initially saying no until I threatened to post about it on Facebook. For the last year or so, they've been getting some very noticeable wear as shown. Now, I sit in this chair a LOT but I had a $250 Costco office chair that I used for probably 15 years and it never did anything like that.

Will3D•5/5/24, 8:04 PM

Hi. could anyone please confirm the length of the 56BLF03 motor? Does the 101mm include the encoder on the back ? Thanks.

Bblave549 I have a SecretLab Titan XL, and would never buy one again. The first thing that...

krbsOP•5/5/24, 9:00 PM

Many thanks for this feedback.

I will look into the office chairs also.

krbsOP•5/5/24, 9:03 PM

Can you please tell me if I can use VKB 200mm extension kit (for gunfighter IV) with Rhino and MCGU grip?

BBozo VFA-86 all of them have the high back which inteferes with head movement in vr

Fr4Ged•5/5/24, 9:10 PM

you can order the Monstertech one without the head part

BBozo VFA-86 https://youtu.be/9Yhc6mmdJC4?si=nxroAb5p1wcg1aAI

Booker•5/5/24, 9:43 PM

I’m probably at 31-33 years with my Aeron. It was expensive at first but amortized over the years it’s been cheap. It’s still in excellent condition and will probably last 30 more without breaking a sweat. I’ve had a happy back all these years.

Ok thank you, I will ask @Will3D DIY would be option, but I am not very manually capable 😂 it woul

Similar Threads