Hi everyone, I'm looking for a sensor to use as body heat sensor for medical project, I'm trying to

Hi everyone, I'm looking for a sensor to use as body heat sensor for medical project, I'm trying to use LM35 with esp32 and IOT system but my problem is that I don't find it suitable (casing)
So any suggestions on what to use, and thank you in advance

AAccur4te Try d21 and d22

Ben•5/25/24, 11:44 AM

There is no d21 and d22 in esp32cam

Ben•5/25/24, 11:46 AM

I also tried to use Bluetooth. The master is sending data correctly, but the slave isn't even connecting to the master

Aaymen ammari Hi everyone, I'm looking for a sensor to use as body heat sensor for medical pro...

Joseph Ogbonna•5/25/24, 12:26 PM

Hey @aymen ammari I found this for you, it has higher temperature range and a very precise accuracy and a temperature tolerance of +-1%.

https://www.microscale.net/products/gy-bme280-5-bme280-5v-atmospheric-pressure-humidity-temperature-sensor-module-for-arduino-spi-iic?variant=47681006502163&currency=NGN&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=Cj0KCQjwmMayBhDuARIsAM9HM8fb9QiaDce0P6ZcaPYwUdyKAQ-Z3JrGD0E2WE1Mb55sgS0ShkuKOJcaAu3rEALw_wcB

Microscale

GY-BME280-5 BME280 5V Atmospheric Pressure Humidity Temperature Sensor

Description: GY-BME280 is a Breakout Board featuring a Bosch Sensortec ME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (s

Aaymen ammari Hi everyone, I'm looking for a sensor to use as body heat sensor for medical pro...

Joseph Ogbonna•5/25/24, 12:27 PM

What kind of casing type are you looking for. And where will it be placed

Jason•5/25/24, 2:25 PM

Hi. Everyone. I am looking for senior IT dev to mentor me. I can pay for this.

Jason•5/25/24, 2:25 PM

Please dm me if you are interested.

Aaymen ammari Hi everyone, I'm looking for a sensor to use as body heat sensor for medical pro...

Ming•5/25/24, 3:44 PM

I'm using one of these in a medical device for one of my projects
https://www.analog.com/en/products/max30208.html

JJoseph Ogbonna What kind of casing type are you looking for. And where will it be placed

aymen ammariOP•5/25/24, 3:46 PM

I want to design something to stick on my finger to measure temperature / heartbeat / SPO2 All at the same time

MMing I'm using one of these in a medical device for one of my projects https://www.an...

aymen ammariOP•5/25/24, 3:47 PM

It can work with Max30102 in parallel right?

Ming•5/25/24, 3:51 PM

You will need a PPG for the SpO2 & heartbeat - but yes, it will work with them in parallel

aymen ammariOP•5/25/24, 3:52 PM

What is PPG?

Ming•5/25/24, 3:53 PM

It's photoplethysmogram - https://en.wikipedia.org/wiki/Photoplethysmogram
Here's an article on it's use - https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6426305/

Photoplethysmogram

A photoplethysmogram (PPG) is an optically obtained plethysmogram that can be used to detect blood volume changes in the microvascular bed of tissue. A PPG is often obtained by using a pulse oximeter which illuminates the skin and measures changes in light absorption. A conventional pulse oximeter monitors the perfusion of blood to the dermis an...

PubMed Central (PMC)

A review on wearable photoplethysmography sensors and their potenti...

Photoplethysmography (PPG) is an uncomplicated and inexpensive optical measurement method that is often used for heart rate monitoring purposes. PPG is a non-invasive technology that uses a light source and a photodetector at the surface of skin to measure ...

JJason Hi. Everyone. I am looking for senior IT dev to mentor me. I can pay for this.

techielew•5/25/24, 4:22 PM

Hey @ Merlin , welcome. Throw this sort of request into the #seeking-collabs channel so it doesn't get lost in the chat stream

Aaymen ammari I want to design something to stick on my finger to measure temperature / heartb...

Joseph Ogbonna•5/25/24, 9:48 PM

Great. The sensor I sent should be a good one.

JJoseph Ogbonna Great. The sensor I sent should be a good one.

aymen ammariOP•5/25/24, 9:54 PM

Thank you, this helps a lot

BBen There is no d21 and d22 in esp32cam

Accur4te•5/26/24, 3:05 AM

brhh i mean on esp32 there are pin 21 and 22 were you have to connect sda and scl pins to it which are there on the esp32cam

techielew•5/26/24, 6:18 AM

Hi @Event Pings,
Trouble connecting a target MCU to your development PC? Let's explore UART driver development tomorrow with @Umesh Lokhande at 15:00 GMT.

Join us: https://discord.gg/HQhGF7F9?event=1242959044159733874

Ttechielew Hi @Event Pings, Trouble connecting a target MCU to your development PC? Let's e...

techielew•5/26/24, 2:51 PM

Hey @Event Pings! We're gonna be getting started with UART driver development in about 10 minutes in the Engineering Hour stage: https://discord.com/channels/1130679493799977062/1212286094830477323

See you shorly!

wafa_ath•5/26/24, 4:43 PM

Hey everyone,

I wanted to share something exciting I’ve been learning about recently Edge AI and its impact on embedded systems and IoT. Edge AI is the practice of running AI algorithms locally on embedded devices, rather than relying on cloud processing... Have any of you worked with Edge AI? What tools or applications have you used?

Wwafa_ath Hey everyone, I wanted to share something exciting I’ve been learning about rec...

Camila_99$$•5/26/24, 5:35 PM

Hey Wafa ! Good weekend everyone.
Your post about Edge AI caught my attention it's such an exciting field! I've been diving into it too, playing around with tools like TensorFlow Lite.

CCamila_99$$Hey Wafa ! Good weekend everyone. Your post about Edge AI caught my attention it...

wafa_ath•5/26/24, 6:18 PM

What projects have you worked on with it? Any tips?

Wwafa_ath Hey everyone, I wanted to share something exciting I’ve been learning about rec...

techielew•5/26/24, 6:25 PM

A while back Navadeep referenced SensiML. They've got a pretty handy SDK that walks you through the model development and selection process. More here: https://sensiml.com/

SensiMLChris Rogers

SensiML -Making Sensor Data Sensible

SensiML is the pioneer of software tools for compact AI processing on IoT endpoints. Build product worthy TinyML code for your IoT sensor app with SensiML.

Ttechielew A while back Navadeep referenced SensiML. They've got a pretty handy SDK that wa...

wafa_ath•5/26/24, 6:46 PM

ow ,i was just going to mention it , i acctually just start using it a few days ago , does anyone here have experience in it ?

techielew•5/26/24, 6:48 PM

I think @Navadeep may have used it. I did a review of it a while back with Chris Rogers. However it was years ago so a lot has probably changed since then.

techielew•5/26/24, 6:49 PM

https://www.youtube.com/watch?v=35AGY02zXPM

YouTubeEmbedded Computing Design

Embedded Toolbox: Knock Out Embedded AI & Machine Learning Developm...

So you’re an embedded or IoT developer, and there’s been an edict from on high that you need to start integrating AI into your design. And that’s about all you have to go on.

So where do you start? First of all, you’re not a machine learning aficionado or experienced data scientist. You’ve also been targeting resource-constrained embedded syste...

Ttechielew https://www.youtube.com/watch?v=35AGY02zXPM

wafa_ath•5/26/24, 7:03 PM

for now am just using the free trial and exploring it , but am curious about it ...

Marvee Amasi•5/27/24, 3:09 PM

I used to think that low-power designlow-power design is all about fancy hardware , but honestly Software plays a big role.
How is that ??
1. Put unused stuff to sleep

: Clock gating dims the lights on idle modules, while power gating cuts the power completely.
2. Smart task scheduling

: Try not to overwork your processor. Schedule your tasks efficiently and let it nap in low-power modes.
3. Tell peripherals to chill

:
Our Sensors and displays are energy hogs. Turn them off when you are not using them and configure them for power-saving modes also.
4. Code like a pro

: Choose efficient algorithms, use power-saving instructions, and eliminate unnecessary operations.

What are your software power-saving tips? Share let's learn

MMarvee Amasi I used to think that `low-power design` is all about fancy hardware , but honest...

wafa_ath•5/27/24, 3:54 PM

I will add optimizing memory usage and using dynamic voltage and frequency scaling (DVFS) to the list

Wwafa_ath I will add optimizing memory usage and using dynamic voltage and frequency scali...

Marvee Amasi•5/27/24, 4:14 PM

Thanks for adding @wafa_ath , I've also found using fixed pointfixed point math instead of floating pointfloating point when possible, it can save power in some cases

MMarvee Amasi Thanks for adding @wafa_ath , I've also found using `fixed point` math instead o...

wafa_ath•5/27/24, 7:28 PM

How's is that...

Wwafa_ath How's is that...

Marvee Amasi•5/27/24, 7:40 PM

See @wafa_ath here's the idea ryt, Floating pointFloating point calculations require a dedicated FPUFPU in the hardware, that alone can take up more power. Now fixed pointfixed point math can be done purely in software using integer operations, later on saving power on microcontrollers without an FPU. fixed pointfixed point has lower precision.

MMarvee Amasi See @wafa_ath here's the idea ryt, `Floating point` calculations require a dedic...

wafa_ath•5/27/24, 7:43 PM

Ow , that sound familiar

, i get it

MMarvee Amasi I used to think that `low-power design` is all about fancy hardware , but honest...

techielew•5/28/24, 5:03 AM

What processors/controllers do you typically develop for @Marvee Amasi

Ttechielew What processors/controllers do you typically develop for @Marvee Amasi

Marvee Amasi•5/28/24, 6:01 AM

AVR

MMarvee Amasi AVR

techielew•5/28/24, 6:31 AM

Yeah you'll need to conserve power. Microchip has a ready-made sleep library for AVR for those working on it https://onlinedocs.microchip.com/pr/GUID-A834D554-5741-41A3-B5E1-35ED7CD8250A-en-US-5/index.html?GUID-825A28EE-C4E4-4C03-864F-92AA9BA41231.

ЯΣJIП•5/29/24, 5:55 AM

Hii everyone is there anyone who did a project on Sound localization system using any microontroller. I need some inputs

kristof-at-embeetle•5/29/24, 8:08 AM

Hi everyone,
we have renewed the website of Embeetle IDE:

kristof-at-embeetle•5/29/24, 8:08 AM

https://embeetle.com

kristof-at-embeetle•5/29/24, 8:15 AM

By the way - we'd like to hop on the AI train someday.

Think about integrating an LLM into Embeetle IDE, giving users better code suggestions, more meaningful error messages, ...

To keep the user's code safe, the LLM should run on his/her local computer. It should even work offline!

Anyone here has experience with LLMs? I'd like to get in touch with you to exchange ideas.

Kkristof-at-embeetle By the way - we'd like to hop on the AI train someday. Think about integrating ...

nour_oud•5/29/24, 11:40 AM

I think it is a great idea to integrate LLM into Embeetle, but making it work offline will not be easy or possible for everyone because it would require high performance computers. I think it would also be good if you host the LLM model and offer the AI as a service for people who can’t deploy it locally.

electro_coco•5/29/24, 1:01 PM

any one who is familiar with CMAKE i need some help

nour_oud•5/29/24, 2:06 PM

Friendly reminder about Upcoming Event

https://discord.com/events/1130679493799977062/1243925300031782923/1246115974348800000

Nnour_oud I think it is a great idea to integrate LLM into Embeetle, but making it work of...

kristof-at-embeetle•5/29/24, 3:42 PM

I've heard there are LLMs nowadays that can even run on a phone, locally. So it should be possible on an average PC.

kristof-at-embeetle•5/29/24, 3:44 PM

For example model Phi-3:
https://azure.microsoft.com/en-us/blog/introducing-phi-3-redefining-whats-possible-with-slms/

Microsoft Azure BlogKristin Gallagher

Introducing Phi-3: Redefining what's possible with SLMs | Microsoft...

We are excited to introduce Phi-3, a family of small open models offering groundbreaking performance, developed by Microsoft. Learn more.

kristof-at-embeetle•5/29/24, 3:44 PM

Anyone here has experience with Phi-3? Your input would be greatly appreciated

Kkristof-at-embeetle For example model Phi-3: https://azure.microsoft.com/en-us/blog/introducing-phi-...

nour_oud•5/29/24, 3:57 PM

If you use SLMs instead of LLMs it is not going to be as performance

nour_oud•5/29/24, 3:58 PM

@kmulier Why don't you use OpenAI ?

MrIDK•5/29/24, 6:31 PM

Hii

MrIDK•5/29/24, 6:39 PM

Hey I'm an 18-year-old student with a keen interest in cybersecurity and IoT hacking. I'm currently at the beginning of my journey in this exciting field and eager to learn as much as I can. I look forward to connecting with and learning from all of you. Any guidance or resources you can share would be greatly appreciated!

MMrIDK Hey I'm an 18-year-old student with a keen interest in cybersecurity and IoT hac...

Joseph Ogbonna•5/29/24, 9:40 PM

@LMtx

Hi everyone, I'm looking for a sensor to use as body heat sensor for medical project, I'm trying to

Similar Threads

Similar Threads

Similar Threads