Finished building my winger kit rhino and now just needing to learn how to set this beast up, anybod
Finished building my winger kit rhino and now just needing to learn how to set this beast up, anybody got a base profile for a F-16 they can share
(Oh when do I get my green text
(Yea I’m in green
TI’m not sure if there is one but here is where you can look and/or post one if you get it nailed down
📙knowledge-baseRhino Profile Sharing
📙knowledge-baseRhino Profile Sharing
TWelcome to the Rhino Family 
SGreen with envy
TYou too can be Green or Red. I’m no hater I love all the baby Rhino’s
SI'll be whatever color you want me to be
WAwesome brother, no worries take your time. Just curious.
CQuick question... Is all the functionality of the VPC Constellation ALPHA Prime [R] supported in the Rhino software? Mainly the brake lever I'm curious about..I don't care about the RGB but would like to turn it off if I order one.
NYour in luck... everything is supported except for the RGB.. which you can't turn on.
CThanks very cool 
NFunctionally great grip... I'm not fussed about it looking like a space grip. But I hated the hats so I made my own 
https://www.printables.com/model/536591-virpil-replacement-hats
https://www.printables.com/model/536591-virpil-replacement-hatsPrintables.com
Replacement hats for various Virpil devices (Alpha, Alpha-Prime, CM3 Throttle) | Download free 3D printable STL models
CCool, I'm currently using the mongoose and I really hate the 8 way hats as they never click the direction you want.. happy to see this one uses only 4 way .
SI use the left hand Alpha for my collective and it's great. The hats could be better, I might but a rubber braille dot on top of each one. But it's a great grip and the scroll wheel is a fantastic and unique feature
NThere’s also hats in that printables link for the alpha-L (and cm3 throttle), too
SNice
SAnyone know of a L shaped stick extension I can get? I have a VKB gunfighter grip. I looked at the VKB, Virple, and Winwing stores and non have an L shaped stick extension. Would I have to build my own?
SI'd like to second that question but for goose-neck cyclic style extensions
TQR4rigs, Quick Release Mounts for Sim Rigs Joystick Extension for Thrustmaster and Virpil (VPC) [TMVPCStickExt] - The Joystick extension fits the Thrustmaster Warthog/Cougar and Virpil (VPC) Joystick ranges and is ideal when using the QRDee Center Mount System. The main tube is 30mm in diameter and comes in a choice of two different styles: Kink...
TOthers use this in combination with a straight pipe of their chosen length.
T★ Designed for Space Sim Cockpits
★ "Z" Style Extension to Create your own Omni-Throttle
★ Premium All-Metal Construction
★ Adjustable Grip Angle
★ "Z" Style Extension to Create your own Omni-Throttle
★ Premium All-Metal Construction
★ Adjustable Grip Angle
Ncould be a good opportunity to diy? since you don't need to worry about wires inside the extension, it's all external connection for vkb
BThat z grip is as close you'd get to an l, I'd doubt you actually need and L.
The grip end of that swivels so it makes a fully straight up stick, it just has a 15cm offset, it does build nearly 11cm to though.
The grip end of that swivels so it makes a fully straight up stick, it just has a 15cm offset, it does build nearly 11cm to though.
FThe Virpil Z-ext is great, and the Rhino gives you a ~10cm rise already, I found the z is all I need...
F
SPerfect! Only problem is I need an adapter to fit the VKB grip on the Virpil extension, if that exists
BIt would be the same as the normal one.
SThe vkb adapter that comes with the rhino?
BIf you order it with it yeah,
SOk sweet then I’m all good, thanks man!
Splanning on ordering a 57blf03 kit and was wondering how long shipping to the us normally takes and how much shipping usually is
WIt's usually around 50EUR (FedEx) and takes ~4 days
Rbest ghetto cheap mounting option for an office chair? Not sure I want a huge stick extension from the base on the floor
CI just squeeze mine between my legs
R86BLF04 worth getting over the other motors?
TI’m mounting it to a pedestal because the normal throw (22 degree) is absolutely perfect for me.
Also it’s not a huge deal but an extension lowers the forces you feel (ever so slightly) so I’m able to run the rhino at slightly lower settings and get basically the same stick feel.
I’ll post a pic when it’s finished but remember like ALL things with me… Slow AF
Also it’s not a huge deal but an extension lowers the forces you feel (ever so slightly) so I’m able to run the rhino at slightly lower settings and get basically the same stick feel.
I’ll post a pic when it’s finished but remember like ALL things with me… Slow AF
TI posted my review in the reviews tab.
Keep in mind we live outside DC (east coast) so shipping from Europe is a bit quicker for me than for west coast folks.
Start to finish my order was 4 freaking days TOTAL
Keep in mind we live outside DC (east coast) so shipping from Europe is a bit quicker for me than for west coast folks.
Start to finish my order was 4 freaking days TOTAL
TPlaced my order Friday night. Paid Saturday. Shipped Monday. Box was delivered Wed morning.
TFrom EU to USA… 4 business days
TTOTAL (only 2 of those was shipping)
TI mention in the review that seems super fast so maybe I was lucky but yeah between 4-6 days and it’s at your door.
depends on order availability
depends on order availability
Shi, how much stick force can it generate?
FOnly for very long extensions or other oddities
SI am planning on printing the housing using the design from protomaker964 didnt see it mentioned in the assembly guide but do i need to use heat set inserts for the panels?
Ni think only gadroc guide is designed around heat set inserts
Sok thanks
TEverything to assemble the Protomaker build is on the BOM in the assembly page. (Page 2)
As nubbins said only Gadroc build and some light mods use the inserts.
Most of the builds out are the proto build and they are all running strong!
As nubbins said only Gadroc build and some light mods use the inserts.
Most of the builds out are the proto build and they are all running strong!
Nanyone have an .STL for a compact z-extension? ie. much smaller both horizontally and vertically than vpc's z extension
