best ghetto cheap mounting option for an office chair? Not sure I want a huge stick extension from t
best ghetto cheap mounting option for an office chair? Not sure I want a huge stick extension from the base on the floor
CI just squeeze mine between my legs
R86BLF04 worth getting over the other motors?
TI’m mounting it to a pedestal because the normal throw (22 degree) is absolutely perfect for me.
Also it’s not a huge deal but an extension lowers the forces you feel (ever so slightly) so I’m able to run the rhino at slightly lower settings and get basically the same stick feel.
I’ll post a pic when it’s finished but remember like ALL things with me… Slow AF
Also it’s not a huge deal but an extension lowers the forces you feel (ever so slightly) so I’m able to run the rhino at slightly lower settings and get basically the same stick feel.
I’ll post a pic when it’s finished but remember like ALL things with me… Slow AF
TI posted my review in the reviews tab.
Keep in mind we live outside DC (east coast) so shipping from Europe is a bit quicker for me than for west coast folks.
Start to finish my order was 4 freaking days TOTAL
Keep in mind we live outside DC (east coast) so shipping from Europe is a bit quicker for me than for west coast folks.
Start to finish my order was 4 freaking days TOTAL
TPlaced my order Friday night. Paid Saturday. Shipped Monday. Box was delivered Wed morning.
TFrom EU to USA… 4 business days
TTOTAL (only 2 of those was shipping)
TI mention in the review that seems super fast so maybe I was lucky but yeah between 4-6 days and it’s at your door.
depends on order availability
depends on order availability
Shi, how much stick force can it generate?
FOnly for very long extensions or other oddities
SI am planning on printing the housing using the design from protomaker964 didnt see it mentioned in the assembly guide but do i need to use heat set inserts for the panels?
Ni think only gadroc guide is designed around heat set inserts
Sok thanks
TEverything to assemble the Protomaker build is on the BOM in the assembly page. (Page 2)
As nubbins said only Gadroc build and some light mods use the inserts.
Most of the builds out are the proto build and they are all running strong!
As nubbins said only Gadroc build and some light mods use the inserts.
Most of the builds out are the proto build and they are all running strong!
Nanyone have an .STL for a compact z-extension? ie. much smaller both horizontally and vertically than vpc's z extension
Sa stick extensnion?
Nyeah
Nlike this
TThe best way is to contact them and see if they will work with you on this project.
Gonna be awesome I can tell
Gonna be awesome I can tell
Amy VKB setup is made of almost exclusively 2by4 and plywood, I just need to replace my dining chair for a garden furniture and itll be full ghetto
AI'd recommend getting some 2by4 and long screws to mount it on the chair bracket, or a pedestal with piece of ply and then your heels/pedals will stabilize it
DHi! I'm new to FFB. I'm wondering if the deceleration - stick forward effect is a realistic one or is that art added to FFB? i'm just confused why the stabilators would change to nose down due to breaking. or is it the inertia of the stick pulling it forward? in that case isn't it a little strong of an effect?
Dunfortunately I don't have RL experience
WIt's not meant to be realistic, more of an 'art' added for immersion like various vibrations. Some may like it some may don't - it's always possible to turn it off. 
RHey guys - does anyone have experience with the VKB Rev C adapter (mk4)? I have a Rev B with the pins and the contact patch and the disconnects are driving me insane. Was wondering if the Rev C works better or not? Seems to be a minijack configuration, which should be far superior, by the looks of it?
DI understand, thanks! Is it something to turn off in TelemFFB? Which setting is it? Will it affect in-flight as well or only ground handling?
NInterestingly enough, its called Deceleration Force 
. Only activates while on the ground
. Only activates while on the ground
DThanks I’ll check it out in the evening
I’ll check it out in the evening
Ndon't have my hands on the vpf adapter yet, but rev.c is a huge improvement over b
Nstill requires a tight grip fastener for proper install, and SCG is still tricky due to the plastic adapter, but MCG is much better
Nno more need to apply so much downward force when installing
RAre you supposed to press down hard while installing with Rev B? Isn't there a risk of bending the pins?
RThanks for giving me hope! I really want to switch to Rev C, but I'm euro-based and they don't sell them in Europe yet =/
Not going to get a whole new grip just to get the new connector...
Not going to get a whole new grip just to get the new connector...
Nyea there is risk, not supposed to be too much force, but it's always a balance and becomes a ever-worsening vicious cycle once deeper gouges manifest
Nhopefully will be able to compare vpf adapter vs GF base rev.c later this week
RYeah... gotcha.
I did what someone here proposed back when I got my unit, months ago, and applied some sodder to the contact patches (because it was driving me absolutely mad). It helped... then, it didn't... the screw kept getting loose under vibration. I finally invested in some loctite, which helped for a few weeks... now, it's back...
I did what someone here proposed back when I got my unit, months ago, and applied some sodder to the contact patches (because it was driving me absolutely mad). It helped... then, it didn't... the screw kept getting loose under vibration. I finally invested in some loctite, which helped for a few weeks... now, it's back...
Nunfortunate to hear that
NI never had to replace my rev.b pads but if they told me to add solder I think I wouldve just asked for a replacement instead, that doesn't look like a viable long term fix
NI retrofitted my GF3 with rev.c, hate the extra 20mm extension but the connector difference is night and day
RWell, as I understood it, it was a matter of the pins not making good contact with the patch. Made sense that elevating the patch by means of making a few small "sodder hills" would eliminate distance as a possible culprit.
And, again, for a while it worked. It was solid in the beginning. For some reason, it became more and more unstable, though, and now it's disconnecting several times every flight and I need to twist the grip some to get the connection back.
And, again, for a while it worked. It was solid in the beginning. For some reason, it became more and more unstable, though, and now it's disconnecting several times every flight and I need to twist the grip some to get the connection back.
RThat sounds great! I take it it's just stable connection now?
Naffirmative, no problems with MCGU
Non the other hand, I didn't really have issues either with MCGU on rev.b, only SCG
Nbeen using MCGU with a quick release clamp for grip fastener, hope to keep do the same on vpforce
ROh? What does that look like? Has it been good? I've only been using the default interface... with the aforementioned results :D
RHad the same issues on the GF.. just less because no shaking...