Universal Blue•2y ago

gamescope supports reshade shaders

KKyle Gospo gamescope supports reshade shaders

char•6/9/24, 2:37 PM

how would I go about it?

Kyle GospoOP•6/9/24, 2:37 PM

https://github.com/safijari/Reshadeck

GitHub

GitHub - safijari/Reshadeck: Reshade Shader Loader for Decky Plugin...

Reshade Shader Loader for Decky Plugin Loader for the handheld Steam Game Loader - safijari/Reshadeck

Kyle GospoOP•6/9/24, 2:38 PM

https://reshade.me/forum/shader-presentation/2368-hue-brightness-contrast-saturation-shift

Hue/brightness/contrast/saturation shift

Kyle GospoOP•6/9/24, 2:38 PM

^ some minor mod of this

char•6/9/24, 2:38 PM

I'll try this out

char•6/9/24, 2:38 PM

thanks

DocMAX•6/9/24, 2:42 PM

strange, protonup is not detecting steam anymore

Ttryhardsoccermomswag cant really help with #1 but for #2, try fixing it with this command: ``` ujust ...

WeeberWeebMan•6/9/24, 2:44 PM

this unfortunately did not fix my download speed

char•6/9/24, 2:46 PM

@Kyle Gospo do you kno wwhat file extension to use?

WWeeberWeebMan this unfortunately did not fix my download speed

wolfyreload•6/9/24, 2:53 PM

You could try disable IPv6 that fixed the download speeds for one user a while back.

KKyle Gospo https://github.com/safijari/Reshadeck

char•6/9/24, 2:55 PM

so it doesnt work since it doesnt support sliders apparently

Wwolfyreload You could try disable IPv6 that fixed the download speeds for one user a while b...

WeeberWeebMan•6/9/24, 2:55 PM

ok sure, is it the setting of bazzite connected internet?

Cchar so it doesnt work since it doesnt support sliders apparently

Kyle GospoOP•6/9/24, 2:55 PM

Yeah remove them and hardcode the value you want

char•6/9/24, 2:55 PM

gotcha

Aragami•6/9/24, 3:04 PM

Hi. I'd like to install universal blue on my 2nd drive (an HDD) and I have a few question. When I searched on how to install it, a guide says "we do not recommend users consume the base images directly on their devices" and "Universal Blue does not recommend or promote the usage of the base images for daily use".

I asked on Reddit for what Linux distro should I use for daily use and 1 recommended me Universal Blue. But now I'm confused. Should I install some other distro, or is Universal Blue (and more specifically bazzite) fine for daily use?

AAragami Hi. I'd like to install universal blue on my 2nd drive (an HDD) and I have a few...

Kyle GospoOP•6/9/24, 3:07 PM

We recommend you do not attempt to install any OS tree operating system on a traditional hard drive

Kyle GospoOP•6/9/24, 3:07 PM

You will have a very bad time

Aragami•6/9/24, 3:07 PM

Oh...

Kyle GospoOP•6/9/24, 3:08 PM

Our base images are not recommended for daily use, bazzite and bluefin/aurora absolutely are recommended

KKyle Gospo Our base images are not recommended for daily use, bazzite and bluefin/aurora ab...

Ellis•6/9/24, 3:10 PM

you mean ublue kinoite, silverblue, etc.

Ellis•6/9/24, 3:10 PM

EEllis you mean ublue kinoite, silverblue, etc.

HikariKnight•6/9/24, 3:10 PM

those are the base images

Ellis•6/9/24, 3:11 PM

i ran ublue kinoite on my desktop for over a year

KKyle Gospo Our base images are not recommended for daily use, bazzite and bluefin/aurora ab...

Aragami•6/9/24, 3:11 PM

So bazzite and bluefin/aurora are base images or are recommended for daily use? Sorry, English isn't my native language and I want to be sure I understand what I read

AAragami So bazzite and bluefin/aurora are base images or are recommended for daily use? ...

HikariKnight•6/9/24, 3:11 PM

bazzite. bluefin/aurora are our actual "products" they are meant for daily use and are built from the base images (silverblue, kinoite, etc) which are not meant for daily use

Aragami•6/9/24, 3:14 PM

Oh, ok. Thanks for helping me understand. Which guide should I follow to install bazzite? Also, do I need to make a partition 1st or can I make a partition during installation like when installing Ubuntu?

HikariKnight•6/9/24, 3:16 PM

if you want the most dead simple way, unplug the main drive, install bazzite on a separate drive, plug other drive back
profit

Aragami•6/9/24, 3:18 PM

Sadly I can't do that. I have some programs installed on my HDD that I want to keep using. And sadly they run on windows only

HikariKnight•6/9/24, 3:18 PM

well you do not want windows and linux to ever share the same drive

HikariKnight•6/9/24, 3:20 PM

if you absolutely need to have them on the dame drive (lets say you have only 1 ssd and 1 hdd)
then you need to put the linux efi on the hdd and set the hdd as the boot drive, that way you avoid windows nuking the grub bootloader

HHikariKnight well you do not want windows and linux to ever share the same drive

Aragami•6/9/24, 3:20 PM

Oh I know. I have windows installed on a small SSD. Only few programs and games are installed on my HDD

HHikariKnight if you absolutely need to have them on the dame drive (lets say you have only 1 ...

Aragami•6/9/24, 3:21 PM

Thanks for the tip. Really appreciated :3

HikariKnight•6/9/24, 3:22 PM

https://universal-blue.discourse.group/docs?topic=1146#manual-partitioning-to-the-same-drive-for-dual-boot-setups-19
this is how the partitions and subvolumes ("folder" based partitons in layman terms) has to be

Universal Blue

Bazzite Inital Setup and Installation for General Desktop and Lapto...

[Desktop] Pre-Installation Minimum System Requirements Architecture: x86_64 Firmware: UEFI (CSM Support should be disabled if available) Processor (CPU) : 2GHz quad core processor or better System Memory (RAM): 4GB Graphics: A graphics card that can utilize Vulkan 1.3+ Storage: 50GB free on an internal solid-state drive Network: Stable intern...

HikariKnight•6/9/24, 3:22 PM

/var

/var

is optional to be its own subvolume

HikariKnight•6/9/24, 3:22 PM

everything else is required

Onihikage•6/9/24, 3:22 PM

Suppose one has an iGPU and dGPU, both AMD, and wants to make a particular flatpak use the dGPU. How would they go about that?

HHikariKnight everything else is required

Aragami•6/9/24, 3:23 PM

Cool, thanks :3

OOnihikage Suppose one has an iGPU and dGPU, both AMD, and wants to make a particular flatp...

HikariKnight•6/9/24, 3:24 PM

switcherooctl launch --gpu=1 /path/to/executable

switcherooctl launch --gpu=1 /path/to/executable

i think the command is
you can get the gpu indexes from

switcherooctl list

switcherooctl list

HikariKnight•6/9/24, 3:25 PM

so you can just replace the executable to the flatpak command

HHikariKnight `switcherooctl launch --gpu=1 /path/to/executable` i think the command is you ca...

Kyle GospoOP•6/9/24, 3:26 PM

No need to specify the GPU

Kyle GospoOP•6/9/24, 3:26 PM

Switcheroo will always default to the marked dedicated

Kyle GospoOP•6/9/24, 3:27 PM

You can also right click on the desktop shortcut and launch on dedicated

Onihikage•6/9/24, 3:28 PM

so does that mean always launching it with switcheroo or does that get saved somehow?

wolfyreload•6/9/24, 3:28 PM

If you on KDE you can do it in the UI and tell it to use the dedicated GPU. Right click on the app in the menu "Edit Application" >> Application Tab >> Advanced Options >> Run using dedicated graphics card