bazzite. bluefin/aurora are our actual "products" they are meant for daily use and are built from th

bazzite. bluefin/aurora are our actual "products" they are meant for daily use and are built from the base images (silverblue, kinoite, etc) which are not meant for daily use

Aragami•6/9/24, 3:14 PM

Oh, ok. Thanks for helping me understand. Which guide should I follow to install bazzite? Also, do I need to make a partition 1st or can I make a partition during installation like when installing Ubuntu?

HikariKnightOP•6/9/24, 3:16 PM

if you want the most dead simple way, unplug the main drive, install bazzite on a separate drive, plug other drive back
profit

Aragami•6/9/24, 3:18 PM

Sadly I can't do that. I have some programs installed on my HDD that I want to keep using. And sadly they run on windows only

HikariKnightOP•6/9/24, 3:18 PM

well you do not want windows and linux to ever share the same drive

HikariKnightOP•6/9/24, 3:20 PM

if you absolutely need to have them on the dame drive (lets say you have only 1 ssd and 1 hdd)
then you need to put the linux efi on the hdd and set the hdd as the boot drive, that way you avoid windows nuking the grub bootloader

HHikariKnight well you do not want windows and linux to ever share the same drive

Aragami•6/9/24, 3:20 PM

Oh I know. I have windows installed on a small SSD. Only few programs and games are installed on my HDD

HHikariKnight if you absolutely need to have them on the dame drive (lets say you have only 1 ...

Aragami•6/9/24, 3:21 PM

Thanks for the tip. Really appreciated :3

HikariKnightOP•6/9/24, 3:22 PM

https://universal-blue.discourse.group/docs?topic=1146#manual-partitioning-to-the-same-drive-for-dual-boot-setups-19
this is how the partitions and subvolumes ("folder" based partitons in layman terms) has to be

Universal Blue

Bazzite Inital Setup and Installation for General Desktop and Lapto...

[Desktop] Pre-Installation Minimum System Requirements Architecture: x86_64 Firmware: UEFI (CSM Support should be disabled if available) Processor (CPU) : 2GHz quad core processor or better System Memory (RAM): 4GB Graphics: A graphics card that can utilize Vulkan 1.3+ Storage: 50GB free on an internal solid-state drive Network: Stable intern...

HikariKnightOP•6/9/24, 3:22 PM

/var

/var

is optional to be its own subvolume

HikariKnightOP•6/9/24, 3:22 PM

everything else is required

Onihikage•6/9/24, 3:22 PM

Suppose one has an iGPU and dGPU, both AMD, and wants to make a particular flatpak use the dGPU. How would they go about that?

HHikariKnight everything else is required

Aragami•6/9/24, 3:23 PM

Cool, thanks :3

OOnihikage Suppose one has an iGPU and dGPU, both AMD, and wants to make a particular flatp...

HikariKnightOP•6/9/24, 3:24 PM

switcherooctl launch --gpu=1 /path/to/executableswitcherooctl launch --gpu=1 /path/to/executable i think the command is
you can get the gpu indexes from
switcherooctl listswitcherooctl list

HikariKnightOP•6/9/24, 3:25 PM

so you can just replace the executable to the flatpak command

HHikariKnight `switcherooctl launch --gpu=1 /path/to/executable` i think the command is you ca...

Kyle Gospo•6/9/24, 3:26 PM

No need to specify the GPU

Kyle Gospo•6/9/24, 3:26 PM

Switcheroo will always default to the marked dedicated

Kyle Gospo•6/9/24, 3:27 PM

You can also right click on the desktop shortcut and launch on dedicated

Onihikage•6/9/24, 3:28 PM

so does that mean always launching it with switcheroo or does that get saved somehow?

wolfyreload•6/9/24, 3:28 PM

If you on KDE you can do it in the UI and tell it to use the dedicated GPU. Right click on the app in the menu "Edit Application" >> Application Tab >> Advanced Options >> Run using dedicated graphics card

KKyle Gospo You can also right click on the desktop shortcut and launch on dedicated

HikariKnightOP•6/9/24, 3:28 PM

oh didnt know about this

Wwolfyreload If you on KDE you can do it in the UI and tell it to use the dedicated GPU. Righ...

Onihikage•6/9/24, 3:28 PM

that's probably the solution I'm looking for, thanks!

Kyle Gospo•6/9/24, 3:28 PM

It's all switcheroo all the way down

HHikariKnight bazzite. bluefin/aurora are our actual "products" they are meant for daily use a...

ChaiQi•6/9/24, 3:30 PM

Did this change at some point?
Used to be base (do not use) -> main (use like upstream) -> featured/custom bazzite/bluefin/aurora/etc

CChaiQi Did this change at some point? Used to be base (do not use) -> main (use like up...

Kyle Gospo•6/9/24, 3:31 PM

No distinction between base and main

Kyle Gospo•6/9/24, 3:32 PM

We don't recommend them to anyone except those making custom images from them

ChaiQi•6/9/24, 3:32 PM

o.0 huh

ChaiQi•6/9/24, 3:32 PM

that definitely is new

HikariKnightOP•6/9/24, 3:33 PM

people can use them, but we do not recommend it because they are not our focus past being as close to normal silverblue/kinoite/atomic as possible

ChaiQi•6/9/24, 3:33 PM

Hmmm

HikariKnightOP•6/9/24, 3:33 PM

its been like that for some months now from my understanding

Kyle Gospo•6/9/24, 3:33 PM

Right, you're not going to get pre-installed flatpaks, you still have RPM Firefox, and at the end of the day our product is not Fedora but slightly better

Kyle Gospo•6/9/24, 3:33 PM

That decision is I think over 6 months old now

Kyle Gospo•6/9/24, 3:34 PM

It's also why the new website doesn't strongly emphasize their existence, and why we don't offer isos for them

Kyle Gospo•6/9/24, 3:34 PM

Just something we don't want normal users to be using as a desktop under any circumstance

ChaiQi•6/9/24, 3:34 PM

Ah. I have been somewhat out of the loop

HikariKnightOP•6/9/24, 3:35 PM

np it happens when youre busy

ChaiQi•6/9/24, 3:35 PM

Not really even busy tbh

HikariKnightOP•6/9/24, 3:35 PM

the base images are more of a byproduct from what we actually make

CChaiQi Not really even busy tbh

ChaiQi•6/9/24, 3:36 PM

Just.. unable to contribute to ISO development, which was 95% of the effort around here for a long time, and unable to do much else since my other contributions have either been implemented or rejected