DevHeads IoT Integration Server•2y ago

I am selected in buildspace in S5....😁,

I am selected in buildspace in S5....

SageBoyOP•6/16/24, 3:43 AM

And I will make my project during this event.

SSageBoy I am selected in buildspace in S5....😁,

techielew•6/16/24, 4:10 AM

Congrats sageboy that’s great! What’s in the acceptance pack

Ttechielew Congrats sageboy that’s great! What’s in the acceptance pack 🤔

SageBoyOP•6/16/24, 4:13 AM

Oh!..it is a place where different ppl join and complete their goal in 6 weeks,

SageBoyOP•6/16/24, 4:13 AM

Acceptance pack have the instructions

SageBoyOP•6/16/24, 4:14 AM

https://www.youtube.com/live/5lE2iKsscAU?si=X48YyZ3Bxu2w86Gr

YouTubebuildspace

s5 kick off

SageBoyOP•6/16/24, 4:14 AM

I found out about this on Twitter and then i joined it and got selected.

SSageBoy https://www.youtube.com/live/5lE2iKsscAU?si=X48YyZ3Bxu2w86Gr

techielew•6/16/24, 2:04 PM

Keep us posted!

Ttechielew @Event Pings, a little less than 12 hours to go until @Edison introduces us to D...

techielew•6/16/24, 2:06 PM

Hey @Event Pings, we're going to start this week's Engineering Hour session in a little less than an hour at 15:00 GMT. @Edison will be explaining Direct Memory Access (DMA) on an STM32 and showing how you can leverage it to optimize your designs.

Join us in the Engineering Hour stage channel:
https://discord.gg/mZtsxJQ3ZY?event=1250671812329607218

Ttechielew Keep us posted!

SageBoyOP•6/16/24, 2:47 PM

Yeah!.. I have to choose a project which I am going to work on but I am confused, what should I choose , I have thought of an audio amplifier only with transistors no ic, a helium balloon control with esp, or a hand motion capture gloves. Idk what should I choose, do you have any other suggestions, i am a beginner btw

SSageBoy Yeah!.. I have to choose a project which I am going to work on but I am confused...

techielew•6/16/24, 2:54 PM

How about we take a community poll? Would you be open to that? We can create one after the EH session today.

KarmaHitsBack•6/16/24, 3:01 PM

demo message

Ttechielew How about we take a community poll? Would you be open to that? We can create one...

SageBoyOP•6/16/24, 3:07 PM

Yeah sure, I am excited

Ttechielew How about we take a community poll? Would you be open to that? We can create one...

holdthedoor1518•6/16/24, 3:46 PM

hi I'm new here I just want to join my first event here

Ttechielew How about we take a community poll? Would you be open to that? We can create one...

SageBoyOP•6/17/24, 5:09 AM

Sir when will you create the poll?

Accur4te•6/17/24, 5:35 AM

how to fix gdb server error in stm32 cube ide

Accur4te•6/17/24, 5:35 AM

Umesh Lokhande•6/17/24, 6:55 AM

Hi @accur4te The error seems to be because of a corrupt workplace or maybe an incorrect debug configuration in STM32CubeIDE. So right-click on the project name, run clean-up, then make sure the debug settings, and try again. Please tell us more about which exact debugger/board/settings you're using while this error shows up.

UUmesh Lokhande Hi @accur4te The error seems to be because of a corrupt workplace or maybe an in...

Accur4te•6/17/24, 5:15 PM

now its says its unable to detect my stm32 board

Accur4te•6/17/24, 5:17 PM

i have a custom cortex m0 srm32 board , i don't kown much about it as i am trying to learn stm32 , i am following this course - https://www.udemy.com/course/microcontroller-embedded-c-programming/?couponCode=ST19MT61724

Dada__•6/17/24, 10:04 PM

Holaa

Accur4te•6/18/24, 4:08 AM

what are different ways to maximize the range of esp32 c3 chip on a custom board ?

AAccur4te i have a custom cortex m0 srm32 board , i don't kown much about it as i am tryin...

Umesh Lokhande•6/18/24, 4:59 AM

Hi, you haven't mentioned which programmer/debugger you're using. If you're using STLinkV2 Programmer with a custom STM32 board then check the pin connection/circuit twice. Also, make sure if in case the programmer is a clone then test it before programming a custom STM32 board. The more details you provide on h/w connection better we can help. Happy learning!

Accur4te•6/18/24, 4:36 PM

can someone suggest any course that can help me master stm32 ?

UUmesh Lokhande Hi, you haven't mentioned which programmer/debugger you're using. If you're usin...

Accur4te•6/18/24, 4:36 PM

i reinstalled the stm32cube ide and stlinkv2 drivers and the issue resolved .

nour_oud•6/18/24, 4:45 PM

Friendly Reminder about Upcoming Event

Next Friday, June 21st, we'll be back in Office Hours at 15:00 GMT to continue our exploration of Zephyr with @ZacckOsiemo

. Don't miss it!

https://discord.gg/dZEbRuHK?event=1251387175585714297

Ahmed•6/19/24, 9:23 AM

hello everyone i am following the book: INTERNET OF THINGS PROJECT WITH ESP32 BY: AGUS KURNIAWAN
I am facing a problem in setting up esp-idf in vs code can someone help me with it plz
this is a simple code to vlink the LEDs but there is a constant error of "configMINIMAL_STACK_SIZE" can someone help me with it
@everyone

AAhmed hello everyone i am following the book: INTERNET OF THINGS PROJECT WITH ESP32 BY...

ZacckOsiemo•6/19/24, 10:20 AM

It looks like you need to define that configMinimal_Stack_Size

Accur4te•6/20/24, 4:33 AM

Few days ago on this server I posted about I want to extract data from a rs485 flow meter , Adler the suggestion I did write the code the communication between arduino and flow meter was successfully but , it’s unable to read the data as I don’t have the exact register and the address which is responsible for that data , even the manual doesn’t mention it . Is there a way to find it ? I have the name of the chip .

RRenuel Roberts Your code doesn't show any handling for the RE try apply the logic in your code ...

Accur4te•6/20/24, 4:34 AM

AAccur4te Few days ago on this server I posted about I want to extract data from a rs485 f...

techielew•6/20/24, 6:10 AM

What's the chip

Ttechielew What's the chip

Accur4te•6/20/24, 6:12 AM

atmega 16

Accur4te•6/20/24, 6:12 AM

i dig the info up - i got exact value of the register yet , arduino is unable to retrive info

Accur4te•6/20/24, 6:23 AM

0x4001 to 0x4003 ---> flow rate value
0x4004-->flow rate value unit
0x4005 to 0x4007 -->totalizer value
0x4008-->totalizer value unit

Accur4te•6/20/24, 6:23 AM

irst digit is data bits which is 8b
Second digital is Parity which you select as N for None, E for Even, O for Odd
Third digit is stop bite which you can select as 1 / 2 bits

Accur4te•6/20/24, 6:23 AM

should i share the code?

AAccur4te should i share the code?

techielew•6/20/24, 6:36 AM

Yes, share your above description and the code in the #code-review channel and we'll make sure it gets visibility

AAccur4te Few days ago on this server I posted about I want to extract data from a rs485 f...

ZacckOsiemo•6/20/24, 6:48 AM

whats the name of your chip

Ttechielew Yes, share your above description and the code in the #code-review channel and w...

Accur4te•6/20/24, 7:37 AM

i don't have access to that chhannel

ZZacckOsiemo whats the name of your chip

Accur4te•6/20/24, 7:37 AM

its atmega16

AAccur4te i don't have access to that chhannel

techielew•6/20/24, 7:49 AM

Go to <id:customize>, navigate to the "Browse Channels" tab, then search "Code-Review" and it will come up. Click the checkbox.

Screenshot_2024-06-20_at_12.49.27_AM.png

techielew•6/20/24, 7:53 AM

@Event Pings and @Middleware & OS, there's been a lot of chatter around RTOS lately so just a reminder that this week's Office Hours is going to be a further exploration of the Zephyr RTOS with @ZacckOsiemo where he'll review scheduling.

You can sign up for a reminder and access the event here (https://discord.com/events/1130679493799977062/1253254620013400074) on Friday at 15:00 GMT.

Ttechielew Go to <id:customize>, navigate to the "Browse Channels" tab, then search "Code-R...

techielew•6/20/24, 8:09 AM

@accur4te were you able to access to the channel?

Ttechielew @accur4te were you able to access to the channel?

Accur4te•6/20/24, 8:10 AM

the option is not coming which i type code-review

Accur4te•6/20/24, 8:10 AM