no, all the labels are gone except for the brake lever/lot code text that i specifically told him to

no, all the labels are gone except for the brake lever/lot code text that i specifically told him to mask off (and even then he ran into difficulties and only preserved part of it)

nubbinsOP•6/24/24, 8:35 PM

https://discord.com/channels/965234441511383080/1145651561578647582/1252736361924919436

Nnubbins no, all the labels are gone except for the brake lever/lot code text that i spec...

Old Prospector•6/24/24, 9:00 PM

Great, thanks. Any other tips on the process?

OOld Prospector Great, thanks. Any other tips on the process?

nubbinsOP•6/24/24, 9:06 PM

i'm trying to think of anything. I don't know how the T50 looks internally so I'm not sure if there's specifics. There was a little bit of concern over fine pitch threads everywhere inside the MCGU (it has a lot of screw posts), but it wasn't a problem.

nubbinsOP•6/24/24, 9:07 PM

Probably the focus will be on how to remove the paint. If that's even necessary for Cerakote on plastic? idk much about painting plastics

Old Prospector•6/24/24, 9:17 PM

Yea, dreading the potential takedown.

Wwalmis can you send me the vpconf file?

Hiob•6/24/24, 9:55 PM

Helicopter_Test.vpconf6.54KB

Hiob•6/24/24, 9:57 PM

@walmis here it is. The first screens is how I set it up. As I said, when tested dry, works like expected. But when loaded with TelemFFB in game (pedal mode static) the curve looks like the last picture (cut off always on the right side). The pedal in this case is limb to the right and stiff to the left.

HHiob @walmis here it is. The first screens is how I set it up. As I said, when tested...

Number481•6/25/24, 12:26 AM

FWIW, if I import your profile (just using configurator), the gain map looks like the cut-off one in your last screenshot. I recreated the gain map you show.. works fine at first in the same configurator session.

Without using TelemFFB... Reload normal profile...Close configurator...open configurator...load center detent profile... looks like the cut-off one again. I think its either a read-issue or a write-issue with configurator.

Apex•6/25/24, 12:31 AM

#1577 with 984 to go. See you guys in 2026

AndyHill•6/25/24, 12:47 AM

984 orders of Rhino on the wall

AApex #1577 with 984 to go. See you guys in 2026 😂

Touch_Of_Legend•6/25/24, 12:52 AM

Folks drop out quite often so it’s never the full wait.

You can ping the bot for the average

TTouch_Of_Legend Folks drop out quite often so it’s never the full wait. You can ping the bot fo...

Apex•6/25/24, 2:26 AM

Is the command just ! Average with no space?

Apex•6/25/24, 2:34 AM

!help

AApex !help

VPforceBot•6/25/24, 2:34 AM

Available commands are:
!status or !stats - get the latest statistics about Rhino production
!info <email>

You can ask me to fetch you your preorder information. You can DM me in private so you won't leak your email address publicly.

otor kit order requests go here - http://order.vpforce.eu
RHINO base preorders here: http://reserve.vpforce.eu

Also don't forget to check out the #

faq channel for more info.

Google Docs

VPforce Order Request

Order request for VPforce products.
Please note: to reserve a VPforce RHINO FFB base, please use reservation form here.

Once the order is ready to be fulfilled an invoice will be sent to the provided email address.

Google Docs

VPforce RHINO Preorder

Enter your details here, so you can enter the waiting queue for the Rhino FFB base.
Once the queue progresses I will get in touch with further details.

Quick FAQ:
The Rhino costs - 800EUR + Shipping (~80EUR to USA/Canada on average, up to 40EUR in EU)
It is compatible with Virpil/Thrustmaster Grips out of the box
WinWing/VKB GFII grips are supp...

Apex•6/25/24, 2:34 AM

!status

AApex !status

VPforceBot•6/25/24, 2:34 AM

Hey @Apex,
So the last Shipped RHINO is #0593 on 2024-06-21
Average waiting time from preorder to shipped is 208 days, median is 210 days, max is 437 days
578 Rhinos are shipped in total

AApex #1577 with 984 to go. See you guys in 2026 😂

Diverzant•6/25/24, 6:16 AM

I dropped around 80 places in like 17 days

DDiverzant I dropped around 80 places in like 17 days

Apex•6/25/24, 6:40 AM

Oh wow. So it’s not as long as it seems.

AApex Oh wow. So it’s not as long as it seems.

Diverzant•6/25/24, 6:43 AM

6-9 months according to people here that recently got theirs

HHiob Click to see attachment

walmis•6/25/24, 7:42 AM

Thanks, I'll investigate!

VPforceBot•6/25/24, 8:27 AM

:package:

RHINO #0594 Has Shipped!

SSR-F_Winger_[73]_David Hello everyone. Due to time issues and no more free time for me I decided to sel...

SR-F_Winger_[73]_David•6/25/24, 8:57 AM

Hey guys. I tend to overtake myself sometimes with decisions. So I did here. Apologies;)
I will keep offering the kits. Maybe at a reduced pace. Ill let you guys know when a batch will be available.

VPforceBot•6/25/24, 9:23 AM

:package:

RHINO #0595 Has Shipped!

VPforceBot•6/25/24, 9:23 AM

:package:

RHINO #0596 Has Shipped!

VPforceBot•6/25/24, 9:28 AM

:package:

RHINO #0597 Has Shipped!

DDiverzant I dropped around 80 places in like 17 days

Falcoblu•6/25/24, 9:42 AM

In 20 days I went from position #1577 to #1524, I don't think more than 50 Rhinos were delivered in this time.....

Bob Bushman•6/25/24, 9:52 AM

I moved up almost 200 positions, purely from cancellations.
At a time where the cue was much shorter.
He who waits wins

FFalcoblu In 20 days I went from position #1577 to #1524, I don't think more than 50 Rhino...

Diverzant•6/25/24, 9:58 AM

Nope, there was an update of the list few days ago which brought me down 50ish places

VPforceBot•6/25/24, 10:39 AM

:package:

RHINO #0598 Has Shipped!

TonyZ2525•6/25/24, 11:03 AM

@walmis r u on now?

BBob Bushman I moved up almost 200 positions, purely from cancellations. At a time where the...

SR-F_Winger_[73]_David•6/25/24, 11:16 AM

I was a little concerned in the beginning as well. But actually i think that the Rhino is and will remain the FFB-base that offers the most awesome and sophisticated effects. Looking at the moza software for example there is nothing but very basic FFB effects in place.
And one advantage no industrial produced base will be able to offer:
Easy and quick reproduction of replacementparts, modability and not to forget "awesomeness".

And over that one should not forget that there already was a bigger player that offered industrial produced base - brunner. And we all know that the Rhino is far superior.

Fr4Ged•6/25/24, 12:04 PM

I am sure the list will get shorter once the other FFB bases are on the market

Bob Bushman•6/25/24, 12:15 PM

Aye, the easily sourced parts and powerful software options are definitely a plus these new ones are unlikely to match.

But this is also not for everyone, so if they can get a nice 80% experience straight out of the box that will do well.
I've even met those who consider the options and software for the virpil devices as to much to handle.

The prediction I'm going to make though is Moza is going to do very well.
Simply because they are being sold locally alongside thrustmaster.

TM on the other hand is going to struggle.
Especially now that they have competition so far ahead technically being sold right next to them, figuratively speaking.

BBob Bushman I moved up almost 200 positions, purely from cancellations. At a time where the...

Old Prospector•6/25/24, 1:49 PM

Here I stand

DL•6/25/24, 2:39 PM

Hi @walmis, I have ordered a Rhino, Assigned S/N: #1428. Due to the wait time, and after reading the DIY pages I have decided to build 2 FFB setups, one for my stick and one for my rudder pedals. Q1: How do I cancel my reservation order for the Rhino? Q2: I will need 3 motors and 2 control boards. Do you have enough 86BLF03 and 86BLF04 in stock? Thanks in advance

DDiverzant 6-9 months according to people here that recently got theirs

Apex•6/25/24, 2:48 PM

That’s really not bad. I waited 4 months for my whole Virpil setup and at the time I had nothing to use during the wait, now this will just be like a treat when my number comes up.

SSR-F_Winger_[73]_David Hey guys. I tend to overtake myself sometimes with decisions. So I did here. Apo...

Apex•6/25/24, 3:00 PM

PMed you

Jon (Bounty_V)•6/25/24, 3:13 PM

https://il2-korea.com/dd_1

Dev Blog №1

In this issue, we'll go over the top and outline the main qualities of the new project.

Jon (Bounty_V)•6/25/24, 3:13 PM

IL-2 Korea announced! On a brand new graphics engine etc.

Jon (Bounty_V)•6/25/24, 3:13 PM

No word on release date, I'm no dev but to me how things are worded sounds like a 2025 release

Jon (Bounty_V)•6/25/24, 3:14 PM

Since this is just the very first blog post they have for the game I'm sure all sorts of juicy info such as supported hardware and features (such as potential VR, FFB, etc.) will be shared later on

FFalcoblu In 20 days I went from position #1577 to #1524, I don't think more than 50 Rhino...

FuturPaladin [FR/2A]☨•6/25/24, 4:16 PM

1524 is the serial number, not the waiting list

FFuturPaladin [FR/2A]☨1524 is the serial number, not the waiting list

Falcoblu•6/25/24, 5:43 PM

Safe? this is what I get if I ask the bot about the status of my pre-order:

Falcoblu•6/25/24, 5:43 PM

Reservation date: 2024-06-11 11:55:23
Assigned S/N: #1524
926 Rhinos to go!
Reservation Status: Waiting

Falcoblu•6/25/24, 5:44 PM

It actually says that there are 926 Rhinos left before "mine", so in fact it's as if it were a waiting list--

SSR-F_Winger_[73]_David I was a little concerned in the beginning as well. But actually i think that the...

Hiob•6/25/24, 5:48 PM

Exactly my thoughts. Software and community will win this game.

FuturPaladin [FR/2A]☨•6/25/24, 5:53 PM

Yeah you're assigned n 1524 for now

DDL Hi @walmis, I have ordered a Rhino, Assigned S/N: #1428. Due to the wait time, a...

nubbinsOP•6/25/24, 5:55 PM

you don't need to cancel now, just put in your kit orders

nubbinsOP•6/25/24, 5:55 PM

Bot will list them and their status too

nubbinsOP•6/25/24, 5:55 PM

1400s is still a long time and keep that backup option in your back pocket, it's not like you've committed your funds to anything by being on the list

no, all the labels are gone except for the brake lever/lot code text that i specifically told him to

Similar Threads