I think F18 and F15 center grip are not metallic?
I think F18 and F15 center grip are not metallic?
MF18 for sure resin but I think F15 is also
MConfirmed, F15 and F18 are cast resin of sorts, compared to aluminum F16 https://essexindustries.com/products/f-16-fighting-falcon-sidestick-control-grip/
https://essexindustries.com/products/f-15-stick-grip-front-seat/
https://essexindustries.com/products/f-18-stick-grip/
https://essexindustries.com/products/f-15-stick-grip-front-seat/
https://essexindustries.com/products/f-18-stick-grip/
Essex Industriesadmin
The F-16 Fighting Falcon Sidestick Control Grip is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of precision cast aluminum, this grip is resistant to environmental conditions per MIL-STD-810. The stick grip provides a variety of single and multi-function switch assemblies for flight control, autopilot...
Essex Industriesadmin
The F-15 Stick Grip - Front Seat is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of high-strength molded plastic, the grip is resistant to environmental conditions per MIL-STD-810. This stick grip provides a variety of single and multi-function switch assemblies for aircraft trim control, display mana...
Essex Industriesadmin
The F-18 Stick Grip is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of high-strength molded plastic, the grip is resistant to environmental conditions per MIL-STD-810. This stick grip provides a variety of single and multi-function switch assemblies for aircraft trim control, display management, weapo...
MJust got the pdmg 777
For msfs - no profile so just use another jet as the proxy - but it feels horrible mainly no resistance on the stick -
Anyone got any suggest telem settings to make it feel better?
For msfs - no profile so just use another jet as the proxy - but it feels horrible mainly no resistance on the stick -
Anyone got any suggest telem settings to make it feel better?
JIs there a lead time for the TM->WW and VKB->TM adapters
NVKB adapter is just available
NShouldn't add appreciable time to your order
Jwhat about the TM->WW
RIf I buy a DIY kit, does anyone have PSU recommendations for that can easily be purchased in US/Canada? For the DIY FFB kit: 57BLF03 x2 + USB
Nwhat are you looking to buy?
Rsorry. Meant to say power supply recommendations
Nah, am using this right now, no issues but I also run rhino only, not pedals
Ncouldn't really find a reliable suitable one with the correct barrel plug (there are two different 5.5mm I think?), so I thought I may as well go XT60
Nin the future if I revamp the front plate I can just remove the adapter and go straight to XT60
RThank you, i will look for something similar
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SMeanwell. Lrs 350/24 works for 2 devices even
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
R350.4W 24V 14.6A Single Output Switchable Power Supply 24 Volts 14.6 Amps Features • AC input range selectable by a switch • Withstand 300 VAC surge input for 5 seconds • No load power consumption • 1U low profile • High operating temperature, up to 70°C • Protections: Short circuit / Overload / ...
Jcould the power supply that is in the prebuilt ffb base also power another motor for ffb pedals? If not, I already have a 1000w meanwell 24v power supply (UHP-1000-24), could that be swapped in to power both?
BI like the look of the Virpil FLNKR grip for me it will come down to the weight and whether I want to swap out the CM2 grip and how much that will be. I find the CM2 is a good choice with the Rhino for flightsims and then I use the Alpha primes on non-ffb bases for space sims
LThank you so much for my #Rhino #591 
AWarthog is not aluminum, it's what's called "pot metal"
Shttps://www.amazon.de/dp/B08R3T22YV?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/gp/product/B07SHVNLTJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
And a 3D printed cover if you want to make sure noone touches the contacts and causes a short.
I am using self extinguishing, hardly flammable filament. Just to be 100% sure.
https://www.amazon.de/gp/product/B07SHVNLTJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
And a 3D printed cover if you want to make sure noone touches the contacts and causes a short.
I am using self extinguishing, hardly flammable filament. Just to be 100% sure.
Das 12-V-Gleichstrom-Stecker-Anschlusskabel ist geeignet für Überwachungskameras, DVRs, Überwachungssysteme, LED-Lampen oder andere 2,1 x 5,5 mm Gleichstrom-Geräte usw. Das DC-Kabel endet in Rot (positiv)/Schwarz (negativ) für eine leichte Identifikation. 3. Das Kabelende ist abisolierter und ver...
3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs
DFLNKR at least on photos looks like renamed VKB MCGU
Fwell, the FLNKR, MCG and MongoosT-50 are all made after the Su-27
DSU-35, but yeah
DOh look, I became green 
MReal Warthog grip, not TM's tribute version. Real Warthog grip has no pinky paddle and terminates straight at the bottom for center mounting unlike F16 that has a 13deg fwd angle for side stick ergonomy. But just like the F16 grip it is derrived from, it is investment cast aluminum https://essexindustries.com/products/a-10-flight-control-stick-grip/
Essex Industriesadmin
This Flight Control Stick Grip is the primary pilot/aircraft interface for flight, avionics and weapons system control on the Fairchild A-10.
HYes, it would easily power three or four Rhinos......
B... And I love it. I had Alpha and Alpha Prime... I went back to TM's A-10C and F/A-18 grips. But I'm def getting a FLNKR. it feels super nice in the hand, and the new hat design is very clever.
BBTW I know I mentioned this "somewhere" but the hat design of the FLNKR is new. When you press down slightly on the hat to actuate the center switch, it gets "locked to center" so that the other four (or 8? I don't know) switches cannot also be activated. That was the main thing I didn't like about the Alpha grips.
OFlnkr, 220cm, Rhino is my goal
Jthe psu that comes in the rhino, or the 1000 watt one I have?
HThe 1000W piece 
BThe regular rhino doesn't have an internal psu, just your regulsr 180w power brick.
HImportant is the Amps the PSU can deliver. The more the better of course, but you can limit the power draw of the motors in the software. So when your PSU can deliver 40 Amps (make sure that the Amps can be delivered on the rail you are using if the PSU has more than one) you can power 4 motors with 10 Amps each or 5 with 8 and so on.
Jsingle rail, 42A
HPlenty powerful enough.
FThink mine is ~14A for 2 of the strongest motors
Wthe ALPS switches work that way on my T50CM2 on the Rhino 
FHi all, some assistance required - I am looking to use a VKB Tomcat Grip with the VP Rhino - I want to floor mount the Rhno and need ~200mm extension by my calculations; can I use the VKB one or will I need a third party, and what adapters will be required?
Many thanks in advance.
Many thanks in advance.
WYou can use either a Virpil extension or a VKB extension. I'd recommend a Virpil extension + VKB adapter on top since the M36 thread is more robust vs the VKB nipple for a long extension.
FWalmis, you are a scholar and a gent; many thanks!
FAnyone here using a NLR Flight Sim Pro with the Rhino?
How are you securing it?
How are you securing it?
WHaven’t checked in since the competitor announcements.
WHope all is well, rooting for Walmis and VPForce to continue to grow. The only way this news has impacted me is I’m now willing to run my Rhino at ‘full’ power.
Rive been full power since day 1 lol
V:package: 
RHINO #0605 Has Shipped!
RHINO #0605 Has Shipped!SSo the rhino throw is 44° in all directions right? So if i want to order a throw limiter plate that matches the 75% program limit is set then that should be 33°? Its basic math but just wanna make sure i dont overlook anything
ENo
EIt's 44° the whole X or Y -axis
SSo 16.5° instead