yeah you could use a kvm switch to... switch between different outputs and at least on linux you ca

yeah you could use a kvm switch to... switch between different outputs
and at least on linux you can relatively easily prevent either gpu from being initialized to stop any conflicts
however, why not just get a single good gpu lol

Muko Tabi•7/11/24, 11:15 AM

amd is fine for about everything unless you're doing cuda like me

Hhalva yeah you could use a kvm switch to... switch between different outputs and at l...

WeeberWeebMan•7/11/24, 11:16 AM

does a kvm switch prevent amd and nvidia card conflics on windows and linux?

WWeeberWeebMan does a kvm switch prevent amd and nvidia card conflics on windows and linux?

halvaOP•7/11/24, 11:16 AM

kvm switch would be nice to avoid reaching down and switching the cable output from 1 gpu to another

Hhalva yeah you could use a kvm switch to... switch between different outputs and at l...

WeeberWeebMan•7/11/24, 11:16 AM

ah, well i guess you could say i got a spare gpu, which is nvidia, and i am really curious if my idea is even possible

MMuko Tabi amd is fine for about everything unless you're doing cuda like me

WeeberWeebMan•7/11/24, 11:17 AM

i see

MMuko Tabi https://store.steampowered.com/app/993090/Lossless_Scaling/

Kamquat•7/11/24, 11:18 AM

I mean... Bazzite already has integer scaling as a game mode toggle (cause steamos does). I often scale 800p to 1600p on my Go.

Muko Tabi•7/11/24, 11:18 AM

yeah was talking about if it's on windows

Valerie•7/11/24, 11:18 AM

afaik lossless scaling has some features gamescope doesn't

Valerie•7/11/24, 11:19 AM

Like afmf (or something like it)

Muko Tabi•7/11/24, 11:19 AM

frame generation is one

Muko Tabi•7/11/24, 11:19 AM

~~but let's not gaslighting ourselves into using windows~~

Muko Tabi•7/11/24, 11:19 AM

kopium

VValerie afaik lossless scaling has some features gamescope doesn't

Kamquat•7/11/24, 11:20 AM

Yeah but it's a windows app. I don't wanna run AdvertisingOS

Muko Tabi•7/11/24, 11:22 AM

Muko Tabi•7/11/24, 11:22 AM

coping

Kamquat•7/11/24, 11:24 AM

Starfield already has fsr3 framegen, though not 3.1

Muko Tabi•7/11/24, 11:25 AM

on modern games then I would just run without upscaling since my gpu can take it

Muko Tabi•7/11/24, 11:25 AM

mostly just use it on older games

Muko Tabi•7/11/24, 11:25 AM

that have 480p graphic

WeeberWeebMan•7/11/24, 11:26 AM

thanks guys for the answer, will give it a try with my spare nvidia card

Muko Tabi•7/11/24, 11:27 AM

sip

Snowstorm Nightingale•7/11/24, 12:30 PM

Does FSR3.1 work for all games on the steam deck/bazzite? or is it only for certain games?

SSnowstorm Nightingale Does FSR3.1 work for all games on the steam deck/bazzite? or is it only for cert...

Valerie•7/11/24, 12:30 PM

Only that games that have it

Snowstorm Nightingale•7/11/24, 12:31 PM

What's the list so far for supported games?

Valerie•7/11/24, 12:31 PM

Uhh, I'm not aware of one. You'll probably be able to find one

WWeeberWeebMan hey guys, just want your thoughts and answer on an idea i want to try is it pos...

asen23•7/11/24, 12:35 PM

Might as well build 2 pc and use kvm lol

Aasen23 Might as well build 2 pc and use kvm lol

WeeberWeebMan•7/11/24, 12:36 PM

hahaha, i think it would be much interesting if everything could be done in one pc

WeeberWeebMan•7/11/24, 12:36 PM

atleast, that is what i think

PKay™•7/11/24, 12:43 PM

Hey there! anybody know a workaround for gaming mode going black on the

deck

deck

image? My GPU is RX 570 (Polaris) and was detected as "problematic" by the OS itself.

WWeeberWeebMan hahaha, i think it would be much interesting if everything could be done in one ...

asen23•7/11/24, 12:53 PM

You could do it in one case

asen23•7/11/24, 12:54 PM

I think ltt done it

SSnowstorm Nightingale What's the list so far for supported games?

Sp4rkR4t V2.6270•7/11/24, 1:05 PM

There were fives games at launch,

https://community.amd.com/t5/gaming/amd-fsr-3-1-now-available-fsr-3-available-and-upcoming-in-60/ba-p/692000

AMD.com

AMD FSR 3.1 Now Available, FSR 3 Available and Upcoming in 60 Games

Massive Performance. Maximum Fidelity. AMD FidelityFX™ Super Resolution 3 (FSR 3)1 is the latest evolution of our advanced open-source upscaling technology. FSR 3 introduces cutting-edge frame generation technology2, delivering significant framerate boosts in supported games, and a new "Native AA" q...

Aasen23 You could do it in one case

WeeberWeebMan•7/11/24, 1:12 PM

but it would require me to have another processor, motherboard and ram right? as well as a beefier psu

asen23•7/11/24, 1:16 PM

Yes

antheas•7/11/24, 1:29 PM

anyone using waydroid?

antheas•7/11/24, 1:29 PM

do you have any issues with the built in controller?

antheas•7/11/24, 1:29 PM

for handhelds

antheas•7/11/24, 1:30 PM

like triggers not working properly

antheas•7/11/24, 1:30 PM

@Aru ?

MMuko Tabi like yh dlss is better than fsr by a mile but for a normal person with normal ey...

DevilFish303•7/11/24, 1:33 PM

i was actually shocked there is no noticeable difference in ghost of tsushima with FSR 3.1 vs off, also with frame gen, though im a bit of an expert here, not sure if frame gen would degrade the image quality in anyway

Aantheas @Aru ?

Aru•7/11/24, 1:35 PM

I fully disable USB and controllers in waydroid, so I can't say

Eendofturn Looking at this, does it look like it would be compatible with Bazzite do you th...

chunkystyles•7/11/24, 1:47 PM

Did you ever manage to figure this out? Fusion 360 is one of the few things I need to boot into WIndows for.

Cchunkystyles Did you ever manage to figure this out? Fusion 360 is one of the few things I ne...

endofturn•7/11/24, 1:49 PM

I did not. I ended up using OnShape from a browser. I had never used it before but it isn't too dissimilar. I was able to make an stl of a cake topper for my son's birthday, then slice and print it all in Linux.

endofturn•7/11/24, 1:49 PM

Honestly Fusion is the only thing I miss about windows

endofturn•7/11/24, 1:51 PM

I also had tons of issues with bazzite so I switched to Fedora and have had nearly zero issues transitioning to Linux.

chunkystyles•7/11/24, 1:51 PM

I'd love to go FOSS for CAD, but Fusion 360 is the only thing I know.
And I don't even know it that well.

endofturn•7/11/24, 1:52 PM

It isn't like trying to use Gimp when you only know Photoshop. OnShape is pretty close for my application. You can try it in Windows now and see if you can get used to it before switching.

endofturn•7/11/24, 1:53 PM

I just needed to Sketch, then extrude, add fillets and such. If Autodesk made a native fusion I'd switch back instantly tho, don't get me wrong lol

Muko Tabi•7/11/24, 1:57 PM

well

Muko Tabi•7/11/24, 1:58 PM

can't believe wayland nvidia is working perfectly on gnome

yeah you could use a kvm switch to... switch between different outputs and at least on linux you ca

Similar Threads

Similar Threads

Similar Threads