Yeah I think it will be fine, was just wondering if it would be something I could modify or change i

Yeah I think it will be fine, was just wondering if it would be something I could modify or change in the future. How comparable would the max resistance be to a warthog stick

OOgre Yeah I think it will be fine, was just wondering if it would be something I coul...

walmis•7/18/24, 1:42 PM

Not really

check the size difference:

Jj9murphy does anyone know approximately what number on the Rhino waiting list triggers th...

Jon (Bounty_V)•7/18/24, 2:24 PM

For my rhino it was something like 4 to go? Was all manual via DM by walmis to confirm final things, then he sent an invoice

Jon (Bounty_V)•7/18/24, 2:25 PM

But I'm in the first 100, so idk what has changed in the last 530+

Bob Bushman•7/18/24, 2:38 PM

I got an email and bot message about placing my actual order, fired that off through the regular form.

Payment notice then came shortly after, which I promptly did and I got shipping notification that day.

Think i went from initial notice through payment and receiving shipping notice all in span of like 3-4 hours.

It's been like 300 more since then though.

Bob Bushman•7/18/24, 2:42 PM

Exactly which unit shipped that comes with I'm not certain.

Looking back over the chat log with the bot I had 39 units ahead of me and just bam.

Bob Bushman•7/18/24, 2:43 PM

Im certain it didnt hurt i was quick to act

RoboGeoff•7/18/24, 3:04 PM

Out for delivery! It's going to be a fun weekend

f15sim•7/18/24, 11:35 PM

So 50%-70% ABS for pulley supports (say 5mm thick)...yea or nay?

BBob Bushman In quite ok with it not being any more powerful. Certainly was when the stick ...

Booker•7/19/24, 12:56 AM

https://youtube.com/shorts/2XXK-gT5Sko?si=KEosbLm6aEG4yL5G

YouTubethe meme

whack fuck

when

BBooker https://youtube.com/shorts/2XXK-gT5Sko?si=KEosbLm6aEG4yL5G

GTOfire•7/19/24, 8:07 AM

I don't usually enjoy seeing someone else in pain for no reason, but the presentation on that one is just chef's kiss

donkeyman181•7/19/24, 8:56 AM

hey guys what does it means when the motor is constantly blinking green?

BBooker https://youtube.com/shorts/2XXK-gT5Sko?si=KEosbLm6aEG4yL5G

Bob Bushman•7/19/24, 9:32 AM

Almost linked that myself

BBob Bushman In quite ok with it not being any more powerful. Certainly was when the stick ...

Touch_Of_Legend•7/19/24, 12:33 PM

That’s the Rhino hitting its human interface “emergency stop” button

Touch_Of_Legend•7/19/24, 12:34 PM

You don’t just push the Rhino’s buttons.. If you’re not careful she will push yours!!

f15sim•7/19/24, 8:06 PM

I've found a good resource for making 5mm HTD profile pulleys - it uses the MKCad Library for OnShape. https://appstore.onshape.com/apps/Manufacturers%20Models/2ZT7X5D646R3LM3ZND7LGBTYRVM4SVH6CDDGM6I=/description

App Store - Onshape

With Onshape's App Store, modern CAD users can choose to add specialty engineering software such as simulation, CAM, or rendering to their cloud workspace

f15sim•7/19/24, 8:07 PM

You can specify all the parameters you need and you can export the model to anything you like. I output to SolidWorks, then load it into Fusion 360 for special features like bearing pockets.

f15sim•7/19/24, 8:08 PM

Here's a screen shot of the 15 tooth idler pulley design I'm going to print shortly:

f15sim•7/19/24, 8:08 PM

My modifications to that look like this (Fusion):

Ff15sim I've found a good resource for making 5mm HTD profile pulleys - it uses the MKCa...

Hiob•7/19/24, 9:06 PM

What do you want to drive with the printed pulley?

f15sim•7/19/24, 9:07 PM

The above is an idler. I'm using a 74 tooth pulley as the main drive output. The complete system looks like this:

Ff15sim The above is an idler. I'm using a 74 tooth pulley as the main drive output. T...

Hiob•7/19/24, 9:09 PM

So it isn’t intended to go on the motor shaft…

I was worried for a second - not following the conversation from the beginning….

f15sim•7/19/24, 9:09 PM

No. The motor shaft has a machined aluminum 15 tooth pulley on it.

f15sim•7/19/24, 9:10 PM

The motor to pulley belt is 15mm, the pulley to flight controls belt is 12mm. The two idlers in the upper left attach to existing structure that's too narrow to pass a 15mm belt.

Jj9murphy does anyone know approximately what number on the Rhino waiting list triggers th...

Thundersmoke•7/20/24, 3:29 AM

There were like 100 to go when I got my “action required” email. That was just a few weeks ago. It moved so fast after that and I got it earlier this week. It caught me off guard since I also needed to order a mounting plate from SimFab. But happy to report I got it installed today and first flight in DCS Apache was awesome.

Booker•7/20/24, 5:32 PM

Is anyone aware of an all parts included FFB kit for the Thrustmaster TPDR pedals? I’m not really good with projects and I don’t have a 3D printer so I’d rather not try any of the projects I’ve seen. I’d be interested in an all parts included kit.

Stryker990•7/20/24, 9:38 PM

doubt it but anybody found a fix or mitigation for the DCS Fulcrums AP being super unstable with the rhino/FFB?

mattback•7/21/24, 5:06 AM

i got my rhino two days ago, my virpil f14 stick today, and got to use it tonight for the first time

mattback•7/21/24, 5:07 AM

i am so impressed by how easily everything just worked, and worked well

mattback•7/21/24, 5:07 AM

this is 1000% opposite compared to my experience with my pimax crystal

mattback•7/21/24, 5:08 AM

i have some questions about setting up the buttons and cancelling out for example, the axis buttons and what not since if i understand correctly, the rhino cannot handle twist axis ? (yes i am getting rudder pedals next)

Bob Bushman•7/21/24, 8:08 AM

It can handle extra axes from the grips, I just don't think anyone here doesn't already have rudder pedals

I can easily recommend the crosswinds, especially with the damper kit.

(And possible future ffb mod)

Mmattback i have some questions about setting up the buttons and cancelling out for exampl...

Hiob•7/21/24, 9:18 AM

Regardless if FFB or not. Pedals are a huge win over a twist axis.

Bob Bushman•7/21/24, 12:36 PM

I'd honestly be more interested an ffb throttle than pedals, but i suppose I'm solo there.

BBob Bushman I'd honestly be more interested an ffb throttle than pedals, but i suppose I'm s...

Hiob•7/21/24, 1:09 PM

I think winwing and moza have some haptic engine in their throttles, but I‘m certainly not the target group for that. Can’t see much use in it.

Bob Bushman•7/21/24, 1:14 PM

If I wanted haptics I'd jury rig up one my GF's old dildos, or put a buttkicker under it.

Nah im more interested in the possibility of variable damper forces, detents (yes not currently in the rhino software).

BBob Bushman If I wanted haptics I'd jury rig up one my GF's old dildos, or put a buttkicker ...

Hiob•7/21/24, 1:40 PM

Yeah, that makes more sense to me. Though I start with applying the general idea to a collective. (for now)

BBooker Anyone know what the “Machined Aluminum Grip Mount Upgrade for Rhino Anodized Bl...

DarkestKnight 🇺🇸 | Ultimate•7/22/24, 3:29 AM

Is there a modified 3D model for the TMstickconnector model that works with this machined part?

VPforceBot•7/22/24, 7:43 AM

:package:

RHINO #0636 Has Shipped!

VPforceBot•7/22/24, 7:43 AM

:package:

RHINO #0635 Has Shipped!

VPforceBot•7/22/24, 10:45 AM

:package:

RHINO #0640 Has Shipped!

VPforceBot•7/22/24, 10:45 AM

:package:

RHINO #0638 Has Shipped!

VPforceBot•7/22/24, 10:45 AM

:package:

RHINO #0639 Has Shipped!

VPforceBot•7/22/24, 10:45 AM

:package:

RHINO #0637 Has Shipped!

FuturPaladin [FR/2A]☨•7/22/24, 12:07 PM

https://tenor.com/view/nouns-nounish-nouns-dao-proliferate-proliferation-gif-25867188

Tenor

SR-F_Winger_[73]_David•7/22/24, 1:56 PM

Hello Guys.
Got a used but VERY EXCLUSIVE rhino for Sale.
high quality Potentiometers. All Gimbal printed from laser sintered PA12. Walls printed fromm 100% infill PETG-cf. Used but very good condition. Original VPForce VKB connector adapter included. Meanwell LRS 350/24 PSU included.

Asking 999,- plus shipping within EU.

Piola•7/22/24, 2:16 PM

guys I received the notification for the Rhino order, I filled out the form and chose the payment method. Will I receive a payment request soon? what is the next step?

VVPforceBot :package: 🇺🇸 **RHINO #0640** Has Shipped!

bobbyt•7/22/24, 2:27 PM

Order for #640 placed on 12/31/23 for anyone wondering lead times

PPiola guys I received the notification for the Rhino order, I filled out the form and ...

The Greatest of all Fords•7/22/24, 3:49 PM

Usually it comes a couple days after, since I assume Walmis sends them manually.

Bbobbyt Order for #640 placed on 12/31/23 for anyone wondering lead times

WhiteHawk77•7/22/24, 4:40 PM

Lead times might be a bit all over the place since FSExpo about four weeks ago, it jumped about 180 since then, and 68 since yesterday. Since I started checking regularly on the second week of June it’s jumped 264.

PPiola guys I received the notification for the Rhino order, I filled out the form and ...

WhiteHawk77•7/22/24, 4:41 PM

How many were left in the queue when you received it?

Yeah I think it will be fine, was just wondering if it would be something I could modify or change i

Similar Threads