It worked out of the box, yes. I can't check anything right now though since I'm not home.
It worked out of the box, yes. I can't check anything right now though since I'm not home.
Mwhen are you planing to be home? 
and what Bazzite version do you have?
and what Bazzite version do you have?Mcould you pls also help me out how exactly do you use it? from game mode or desktop mode and do you have external monitor connected or not? I am sorry for being that guy, I am just desperate 
KCurrent, 3.6 I guess? And Tuesday.
KDesktop mode, I haven't actually tried it in game mode. I used an external display
Mis it possible that my card somehow is not friendly with amd driver then? hmmm 
KBazzite is updated and should have no problems
MInstalling right now. will be testing. again no sleep for me tonight
MThank you all! you jsut gave me hope!
Kyou can check in terminal if you have both GPUs working. Run and and see if you get different results (or it might be 0 and 1, I don't recall.)
Mwill try again. it was 0 and 1 for me
M@Mister Fluffles Do you have secure boot configured? not sure if it would have any relations.
KI do, but I don't think it should matter
Mi will configure this time it too. is there a manual how to properly do it?
TUniversal Blue
[Secure Boot] Note: Skip this section if Secure Boot is not enabled or unsupported with your hardware. Method A) During Installation Method (See Image Above) A blue screen will appear giving the option to enroll the signed keys after leaving the Bazzite installer. Enroll MOK if you have secure boot enabled. If prompted to enter a password...
MThank you!
JWill do gonna see about updating it today
Mdeck@bazzite:~$ DRI_PRIME=1 glxinfo
name of display: :0
Segmentation fault (core dumped)
deck@bazzite:~$
name of display: :0
Segmentation fault (core dumped)
deck@bazzite:~$
Mthis is my problem
Mdeck@bazzite:~$ switcherooctl
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@bazzite:~$
deck@bazzite:~$ switcherooctl
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@bazzite:~$
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@bazzite:~$
deck@bazzite:~$ switcherooctl
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@bazzite:~$
Kdon't run it w/ DRI_PRIME=1
Kswitcherooctl launch glxinfoKwhich, based on your output
Kis the equivalent of:
DRI_PRIME=pci-0000_67_00_0 glxinfoMdeck@bazzite:~$ switcherooctl lunch glxinfo
Traceback (most recent call last):
File "/usr/bin/switcherooctl", line 188, in <module>
launch(args, gpu)
File "/usr/bin/switcherooctl", line 66, in launch
os.execvp(args[0], args)
File "<frozen os>", line 609, in execvp
File "<frozen os>", line 651, in _execvpe
File "<frozen os>", line 642, in _execvpe
FileNotFoundError: [Errno 2] No such file or directory
deck@bazzite:~$
Traceback (most recent call last):
File "/usr/bin/switcherooctl", line 188, in <module>
launch(args, gpu)
File "/usr/bin/switcherooctl", line 66, in launch
os.execvp(args[0], args)
File "<frozen os>", line 609, in execvp
File "<frozen os>", line 651, in _execvpe
File "<frozen os>", line 642, in _execvpe
FileNotFoundError: [Errno 2] No such file or directory
deck@bazzite:~$
Klunch, yummy
Mdeck@bazzite:~$ switcherooctl launch glxinfo
name of display: :0
Segmentation fault (core dumped)
deck@bazzite:~$
name of display: :0
Segmentation fault (core dumped)
deck@bazzite:~$
Kinteresting
Mthe card is somehow wrongly /badly detected
K Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])Kthat looks right to me
Mdo i have to run any extra kernel commands/modules?
Knope
Mworks in windows on the same device. i just re-instlled Bazzite. fresh install. switched to the Desktop mode and this is how it is for me
Mit's been like that since forerver on any version i've tried.
Mcould be some thunderbolt handshake issue?
Kdid you add that udev rule to fix thunderbolt?
Kthat you found on the AUR?
Mno. i tried back then thjough - it didnt help
Mi can try now again
SI tried to connect to my new printer yesterday but the cups web ui says that my epson ET-2850 was "driverless"
SI did some digging and found that they have Linux drivers on their website for the ET-2850 but I'm guessing I need to ask you to include the driver in the next Bazzite update?
Kit's driverless
Kthis was on silverblue 2 years ago
Mwhat else can I check? any ideas?
i am googling and so far nothing. added udev. rebooting.
i am googling and so far nothing. added udev. rebooting.
MIs there an easy way to reload the plasma desktop without rebooting?
MI need to try unathorize/authorize eGPU maybe once again in Bazzite?
SI got cups to recognize the printer but when I sent out a test print through the cups interface nothing happened.
Knot sure, would need logs
Kbut we'd never include that driver
