Do you run telemffb with decel effect selected?
Do you run telemffb with decel effect selected?
Iyes
Bi think if you de select that , it will stop doing it
Bthere is also an option in the dcs special menu for the f4 about the wso controls but im not sure what it does
II think that fixed it
E@walmis I have problem with the VPForce Configurator. It crashes every time when I start configuring joystick when there are two Rhinos connected. I think I screwed up something when setting up the USB ID's for the devices. Separately both devices work fine. Attached is demonstration video of the problem. Attached is also the settings for the Joystick.
I have tried changing USB ID's for both devices to no avail.
I have also removed Rhino from device manager but it didn't help either.
I have also reset both Rhinos completely using the "Reset config" button but it didnt help.
TelemFFB thinks both Rhinos are fine and I have used them simultaneously while flying. I have, however, encountered some weird behavior with joystick but I'm not sure whether its related to this
I have tried changing USB ID's for both devices to no avail.
I have also removed Rhino from device manager but it didn't help either.
I have also reset both Rhinos completely using the "Reset config" button but it didnt help.
TelemFFB thinks both Rhinos are fine and I have used them simultaneously while flying. I have, however, encountered some weird behavior with joystick but I'm not sure whether its related to this
WHmm, you can try USBDevView (https://www.nirsoft.net/utils/usb_devices_view.html)
Try uninstalling (using the right click menu) all VPforce devices (with VendorID FFFF)
Try uninstalling (using the right click menu) all VPforce devices (with VendorID FFFF)
NirSoft
USBDeview is a software that lists all USB devices that connected to your computer, and allows you disable, enable or uninstall them.
WAlso try different USB ports
EI sorted by VendorID and uninstalled all FFFF vendor devices using the USBDevView. I also rebooted and repeated the process few times. Tried different USB-ports too. Unfortunately it didn't help.
If I start Joystick VPForce configurator and then plug in pedals, the joystick configurator stays alive. I can then also open the pedal-configurator as separate window. However, if I choose joystick from VPForce configurator query it crashes the configurator
The attached image is what I see from USBDevView after uninstalling and re-installing the Rhinos.
If I start Joystick VPForce configurator and then plug in pedals, the joystick configurator stays alive. I can then also open the pedal-configurator as separate window. However, if I choose joystick from VPForce configurator query it crashes the configurator
The attached image is what I see from USBDevView after uninstalling and re-installing the Rhinos.
HYou could first detach the motor in order to see if once powered the shaft moves perfectly smoothly
HI am experiencing small but noticeable torque steps on one axis as well the other being perfectly smooth. Let me know if you find an overcome
SMy issue was resolved by walmis performing a remote recalibration of the affected motor.
HOk thanks for the info!
SNp!
MHello, I just got my rhino, i am trying to use the virpil VFX ( f14 ) grip with it. are there any special drivers i need to install for the VFX grip to communicate with the rhino? i have some basic functionality but i am wondering about the twist axis , it seems like buttons go crazy when i twist the axis.
LJust checking: You did select this grip didn't you?
Mwhere do i do that ?
Mdo i do that inside VPForce configurator?
Lyes
Moh geez
Mit was righ tthere in front of me
Mi just hit reset config and now my stick isn't auto-centering the way it did when i first plugged it in
Lcalibrate it again
Mnow it seems like my left and right is backwards
Mwhen i stick to the left, the blue dot goes to the right
Mwhen i stick to the right, the blue dot goes to the left
Lso which way is your emergency stop button, towards you or your monitor?
Mi steop is towards me
ME stop button is towards me
Lwhat about these
M
Mtheyre not inverted
Mmy force comp are both zero though
Land you already calibrated it again right
Mi'll do it again right now
Lremember to STORE settings
Lyou can test with Apply
Lthen store if you're happy
Mi pressed auto calibrate, then i pressed ok, then i moved stick forward and back a few times and left and right a few times to the maximums, then i pressed auto calibrate again, then i pressed store
Mwas that incorrect? up and down is correct, left and right is backwards
Mnow, if i click " axis invert " it works fine
Maxis invert, apply settings / store settings
Lmovement ranges and directions are OK now?
Myes.
Mbut theres no auto centering happening now
Mdid i need to check something for auto centering?
LGood. I don't understnd why you had to invert if your e-stop if facing your way, though.
M
Mi should have never pressed " reset config " i wonder if that has something to do with it
LThere is no spring force? Can you show your settings
Lah your spring is at 0%