the modprobe has to be added to dracut however adding it as a karg is faster and better for updates

the modprobe has to be added to dracut
however adding it as a karg is faster and better for updates (as modifying dracut will slow down updates)

HikariKnightOP•7/26/24, 9:58 PM

the karg should be something like hid_apple.fnmode=blahhid_apple.fnmode=blah

HikariKnightOP•7/26/24, 10:02 PM

im also updating the guide to mention using kargs instead for setting modprobe options

HHikariKnight the modprobe has to be added to dracut however adding it as a karg is faster and...

Jayden•7/26/24, 10:02 PM

okay so instead of normally using modprobe, we use dracut?

HikariKnightOP•7/26/24, 10:02 PM

Jayden•7/26/24, 10:02 PM

im confused to what command to use. Sorry, first time using immutable distros

Hollow•7/26/24, 10:03 PM

Isn't there usually a continue button at the bottom right?

᲼

᲼•7/26/24, 10:03 PM

yes

HikariKnightOP•7/26/24, 10:03 PM

because we are atomic we need to tell the initramfs system to include the modprobe file if you want to use a modprobe file and it is explained in the guide i linked, anyways im updating it to add the karg option which is prefered

HHollow Isn't there usually a continue button at the bottom right?

HikariKnightOP•7/26/24, 10:04 PM

use ventoy for the usb, it is the only way the scaling patch for steamdeck gets applied atm

Hollow•7/26/24, 10:04 PM

Bruh

᲼

᲼•7/26/24, 10:04 PM

I think you can technically tab to it

HikariKnightOP•7/26/24, 10:04 PM

we dont know why it does not get applied in any other usb installer way

᲼

᲼•7/26/24, 10:05 PM

even if it's not there visualy you can still navigate with tab probably, but yeah

HHikariKnight because we are atomic we need to tell the initramfs system to include the modpro...

Jayden•7/26/24, 10:05 PM

okay ill just read it whenever you are done editing it

RRobotta Mine bigger

LiAr•7/26/24, 10:10 PM

Its just me or your mouse is on an HD quality and not pixelated moy

JJayden okay ill just read it whenever you are done editing it

HikariKnightOP•7/26/24, 10:11 PM

done

᲼

᲼•7/26/24, 10:15 PM

I cannot update my deck.

᲼

᲼•7/26/24, 10:15 PM

Do I need to reinstall?

᲼᲼I cannot update my deck.

HikariKnightOP•7/26/24, 10:15 PM

thanks, can we have logs with that?

᲼

᲼•7/26/24, 10:15 PM

I mean I can update the steam side of it

᲼

᲼•7/26/24, 10:15 PM

sec

᲼᲼I mean I can update the steam side of it

Kyle Gospo•7/26/24, 10:15 PM

there's no such thing

HikariKnightOP•7/26/24, 10:15 PM

Kyle Gospo•7/26/24, 10:15 PM

gamemode and the desktop call the same updater

Kyle Gospo•7/26/24, 10:15 PM

logs please

᲼

᲼•7/26/24, 10:16 PM

── 00:16:01 - System update ────────────────────────────────────────────────────
Pulling manifest: ostree-image-signed:docker://ghcr.io/ublue-os/bazzite-deck:stable
error: Creating importer: Failed to invoke skopeo proxy method OpenImage: remote error: cryptographic signature verification failed: invalid signature when validating ASN.1 encoded signature
System update failed: 
   0: Command failed: `/usr/bin/rpm-ostree upgrade`
   1: `/usr/bin/rpm-ostree` failed: exit status: 1

Location:
   src/steps/os/linux.rs:273
Retry? (y)es/(N)o/(s)hell/(q)uit

── 00:16:01 - System update ────────────────────────────────────────────────────
Pulling manifest: ostree-image-signed:docker://ghcr.io/ublue-os/bazzite-deck:stable
error: Creating importer: Failed to invoke skopeo proxy method OpenImage: remote error: cryptographic signature verification failed: invalid signature when validating ASN.1 encoded signature
System update failed: 
   0: Command failed: `/usr/bin/rpm-ostree upgrade`
   1: `/usr/bin/rpm-ostree` failed: exit status: 1

Location:
   src/steps/os/linux.rs:273
Retry? (y)es/(N)o/(s)hell/(q)uit

᲼᲼```── 00:16:01 - System update ─────────────────────────────────────────────────...

Kyle Gospo•7/26/24, 10:16 PM

https://discord.com/channels/1072614816579063828/1074438180847239279/1258448785961652316

᲼

᲼•7/26/24, 10:17 PM

LLiAr Its just me or your mouse is on an HD quality and not pixelated [moy](https://cd...

Robotta•7/26/24, 10:20 PM

6.1.2 updated the breeze cursor so its no longer pixelated iirc

HHikariKnight done

Jayden•7/26/24, 10:22 PM

Thank you so much!

jimmy•7/26/24, 10:23 PM

thinking of trying bazzite, if i dont partion my current ssd would an installation wipe it

PubisDeciusMons•7/26/24, 10:28 PM

So I decided I should get my Ally X replaced for free by Best Buy while I still can, because of this graphics bug. Happens every time I switch from Desktop to Gaming Mode, won't go away without sleeping/awakening the device, and I figure if it's a hardware issue it will only get worse over time.

Question - is there any problem just popping my 4TB SSD from this Ally X into the replacement device? Or should I start all over?

matt_schwartz•7/26/24, 10:34 PM

I’m not saying it’s impossible but that sounds more like software than a hardware issue to me

matt_schwartz•7/26/24, 10:34 PM

either in Gamescope or in the kernel driver

donutsatwork•7/26/24, 10:43 PM

Is it expected that bazzite on the ally x shows Ram size as 13.34?

Ddonutsatwork Is it expected that bazzite on the ally x shows Ram size as 13.34?

antheas•7/26/24, 10:43 PM

Lower your vram in bios to 1gb

Kyle Gospo•7/26/24, 10:43 PM

then it'll show iirc 14.9

Kyle Gospo•7/26/24, 10:43 PM

which is correct

Kyle Gospo•7/26/24, 10:43 PM

some amount of your RAM is VRAM at all times

PPubisDeciusMons So I decided I should get my Ally X replaced for free by Best Buy while I still ...

antheas•7/26/24, 10:48 PM

Don't you have like 30 days? Keep it for a few more days

antheas•7/26/24, 10:48 PM

Sound like software

PPubisDeciusMons So I decided I should get my Ally X replaced for free by Best Buy while I still ...

HikariKnightOP•7/26/24, 11:05 PM

everyone else answered everything else but yes you can move the ssd from 1 ally x to the other without issues

Mmatt_schwartz I’m not saying it’s impossible but that sounds more like software than a hardwar...

PubisDeciusMons•7/26/24, 11:07 PM

I did a driver update via dnf update and mesa-dri drivers but still problem persists. It is intermittent, it will not bug out on every switch. What else can I try?

HHikariKnight use ventoy for the usb, it is the only way the scaling patch for steamdeck gets ...

Hollow•7/26/24, 11:07 PM

PPubisDeciusMons I did a driver update via dnf update and mesa-dri drivers but still problem pers...

Kyle Gospo•7/26/24, 11:07 PM

dnf isn't a thing here, we're atomic fedora

Kyle Gospo•7/26/24, 11:07 PM

rpm-ostree updaterpm-ostree update updates the system, and we're currently running the same version of Mesa we've had for the last 2 weeks

Aantheas Don't you have like 30 days? Keep it for a few more days

PubisDeciusMons•7/26/24, 11:07 PM

Best Buy says I have until 8/8. I’m going on a road trip starting 8/4 so really I’ve got another week tops

Kyle Gospo•7/26/24, 11:07 PM

@antheas has any other Ally X user reported these issues?

KKyle Gospo @antheas has any other Ally X user reported these issues?

PubisDeciusMons•7/26/24, 11:11 PM

If it makes a difference I am using Bazzite in a dual boot setup. Not sure if this is related but the windows OS is constant BSOD right now and I’m waiting to get a 2nd usb drive to make a recovery drive for it

PPubisDeciusMons If it makes a difference I am using Bazzite in a dual boot setup. Not sure if th...

Kyle Gospo•7/26/24, 11:11 PM

did it BSOD before you dual booted?

── 00:16:01 - System update ──────────────────────────────────────────────────── Pulling manifest: ostree-image-signed:docker://ghcr.io/ublue-os/bazzite-deck:stable error: Creating importer: Failed to invoke skopeo proxy method OpenImage: remote error: cryptographic signature verification failed: invalid signature when validating ASN.1 encoded signature System update failed: 0: Command failed: `/usr/bin/rpm-ostree upgrade` 1: `/usr/bin/rpm-ostree` failed: exit status: 1 Location: src/steps/os/linux.rs:273 Retry? (y)es/(N)o/(s)hell/(q)uit

the modprobe has to be added to dracut however adding it as a karg is faster and better for updates

Similar Threads

Similar Threads

Similar Threads