I guess my point is, I'm OK redoing the entire process but how do I handle the Bios setting I mentio

I guess my point is, I'm OK redoing the entire process but how do I handle the Bios setting I mentioned, do I turn it off before trying to install Bazzite? And is there anything else I need to do differently in my process? I'm just trying to understand why we would expect a different result if I repeat the process exactly the same.

PPubisDeciusMons I guess my point is, I'm OK redoing the entire process but how do I handle the B...

Kyle Gospo•7/26/24, 11:48 PM

bazzite can be installed w/ secure boot on

Kyle Gospo•7/26/24, 11:48 PM

but I wouldn't even touch that until you've confirmed windows works perfectly after reimaging

Valerie•7/26/24, 11:48 PM

I'm gonna say my piece and bet on SOME kind of hardware issue now, especially if Windows gives issues.

VValerie I'm gonna say my piece and bet on SOME kind of hardware issue now, especially if...

PubisDeciusMonsOP•7/26/24, 11:49 PM

Hardware as in the Ally X or the Samsung SSD?

PPubisDeciusMons Hardware as in the Ally X or the Samsung SSD?

Valerie•7/26/24, 11:49 PM

I mean, I doubt it's the SSD if the BSOD is complaining about ACPI

HHollow got a new usb, checked the hash and it matched and it still won't boot from vent...

HikariKnight•7/26/24, 11:50 PM

dont have a usb to check ventoy with atm but the installer should have ventoy support. if not then its blindly tabbing to navigate the wrongly scaled installer

VValerie I mean, I doubt it's the SSD if the BSOD is complaining about ACPI

PubisDeciusMonsOP•7/26/24, 11:51 PM

I think I'll return this Ally X tomorrow to Best Buy as planned, after I take out my SSD. Then on the new unit I'll put my SSD back in and see if Windows will boot, and if the graphics artifact still recurs. If there's still any issue I'll re-image the entire drive.

FlipCup•7/26/24, 11:56 PM

Saw some workarounds potentially to get GeForceNow (Electron) to do 120FPS on linux. Something about modifying a few flags/settings in Chrome. Anyone ever try?

satlen•7/26/24, 11:56 PM

I used ventoy (my ventoy version is 1.0.97) today with no issue

KKyle Gospo bazzite can be installed w/ secure boot on

PubisDeciusMonsOP•7/26/24, 11:59 PM

During the install process Bazzite could not start up for the first time and was giving an error message about bad shim signature, which I understood had to do with Secure Boot, so I turned that off and then Bazzite finished installing and ran for the first time. I guess I'll have to pay extra close attention to that next time.

PPubisDeciusMons During the install process Bazzite could not start up for the first time and was...

Kyle Gospo•7/27/24, 12:00 AM

our installer uses Fedora's kernel, which is signed with Fedora's microsoft-approved key

Kyle Gospo•7/27/24, 12:01 AM

the only way to get that error is:
1: you messed up and didn't enroll the key after the installer finished
2: cosmic ray

KKyle Gospo our installer uses Fedora's kernel, which is signed with Fedora's microsoft-appr...

PubisDeciusMonsOP•7/27/24, 12:08 AM

OK, now it's becoming clear where this went sideways. I watched Aru's video and in his install, he skips enrolling the key when shown the MOK option screen. I followed his video and clicked past it, and immediately got the shim error. I then went into Bios and disabled the Secure Boot Control, restarted, and Bazzite resumed installing and loaded successfully. I don't know how this causes an ACPI error but this is the clear point at which I fucked up (I've never used Linux before lol in case that wasn't clear). It's true that after I resized the drive, I never again booted into Windows, I went straight into booting the Bazzite USB and installing Bazzite. I did not boot Windows again till today when I got the ACPI error.

HikariKnight•7/27/24, 12:09 AM

turning off secure boot would not cause the ACPI error as it is not related

PPubisDeciusMons OK, now it's becoming clear where this went sideways. I watched Aru's video and ...

Kyle Gospo•7/27/24, 12:09 AM

secure boot definitely has nothing to do with any of your problems

Kyle Gospo•7/27/24, 12:11 AM

again I don't even think it's worth the mental energy to figure this out, your issues are fundemental and I wouldn't do anything but re-install Windows right now and re-test

KKyle Gospo secure boot definitely has nothing to do with any of your problems

PubisDeciusMonsOP•7/27/24, 12:11 AM

Do you think I should go ahead and replace the unit to rule out anything hardware related? Or re-image on this unit? Seems like you still lean towards software as the issue

PPubisDeciusMons Do you think I should go ahead and replace the unit to rule out anything hardwar...

Kyle Gospo•7/27/24, 12:12 AM

no, until you install Windows that is at best a fix and at worse generating e-waste

bebi•7/27/24, 12:13 AM

@Crush ty for u answer about gamescope session but what i was trying to do is run a gamescope steam within kde in my htpc and it worked ty

KKyle Gospo no, until you install Windows that is at best a fix and at worse generating e-wa...

PubisDeciusMonsOP•7/27/24, 12:13 AM

Okey dokey. I will take your advice and make this a project for tomorrow. Can I just post in here if I have any questions about the reinstall?

Kyle Gospo•7/27/24, 12:13 AM

yup

Bbebi @Crush ty for u answer about gamescope session but what i was trying to do is ru...

Valerie•7/27/24, 12:13 AM

Ohh sorry, I see.

bebi•7/27/24, 12:14 AM

gladly it is already included gamescope in brazite

HHikariKnight dont have a usb to check ventoy with atm but the installer should have ventoy su...

Hollow•7/27/24, 12:29 AM

it's alright thank you for your advice and time though

KKyle Gospo today

Froggyman [R5 7600X RX9070XT]•7/27/24, 1:28 AM

what about yesterday

Froggyman [R5 7600X RX9070XT]•7/27/24, 1:28 AM

oh wait, that message was yesterday lol

Froggyman [R5 7600X RX9070XT]•7/27/24, 1:29 AM

Hey :catangry: you said "Today" but "Today" was yesterday and yesterday was nothing released so tomorrow will be today

Daisuke88•7/27/24, 1:57 AM

Hi team, I'm planning on migrating to Bazzite from Ubuntu. My question is, am I able to install rpm package that won't get "deleted" on a next version upgrade?

I use the video editor Light works* witch is a paid software and they distribute the software via rpm or deb

DDaisuke88 Hi team, I'm planning on migrating to Bazzite from Ubuntu. My question is, am I ...

Kyle Gospo•7/27/24, 1:58 AM

Yep, rpm-ostree install file.rpmrpm-ostree install file.rpm

Kyle Gospo•7/27/24, 1:58 AM

your layers are kept across updates

Daisuke88•7/27/24, 1:58 AM

Great thank you

᲼

᲼•7/27/24, 1:58 AM

I'm having too much fun with the mouse thingy

᲼

᲼•7/27/24, 1:59 AM

I am actually playing with it more than any of my steam games

᲼

᲼•7/27/24, 1:59 AM

:sobMeltdown:

᲼

᲼•7/27/24, 1:59 AM

I am addicted

bebi•7/27/24, 2:03 AM

i had a problem automounting a drive in fstab, so i fixed it following the video tutorial comenting it on bash, now my ostree 0 is stable hoow do i copy it to ostree 1 for backup

Valerie•7/27/24, 2:03 AM

Reminds me of when I used to have a Mac

Bbebi i had a problem automounting a drive in fstab, so i fixed it following the video...

Valerie•7/27/24, 2:04 AM

Once you update it'll be moved to the ostree 1 image

bebi•7/27/24, 2:04 AM

its auto then

Valerie•7/27/24, 2:04 AM

Or, actually isn't fstab not atomically managed?

bebi•7/27/24, 2:04 AM

i edited my ntfs drives to auto mount

bebi•7/27/24, 2:05 AM

they didn't auto mount after instalation i had to edit mount points in kde partition manager

Bbebi i had a problem automounting a drive in fstab, so i fixed it following the video...

Kyle Gospo•7/27/24, 2:05 AM

next update 0 becomes 1

Bbebi i edited my ntfs drives to auto mount

Kyle Gospo•7/27/24, 2:05 AM

please do not install games to these drives

Kyle Gospo•7/27/24, 2:05 AM

you will have a bad time

bebi•7/27/24, 2:05 AM

i c

bebi•7/27/24, 2:05 AM

how bout already installed ones?

Bbebi how bout already installed ones?

Kyle Gospo•7/27/24, 2:05 AM

bad time

bebi•7/27/24, 2:05 AM

but they auto mouint fine

bebi•7/27/24, 2:06 AM

my brtfs drive is giving me probs

I guess my point is, I'm OK redoing the entire process but how do I handle the Bios setting I mentio

Similar Threads

Similar Threads

Similar Threads