I was having a similar thing and rather than use the BIOS I went into device manager and under each

I was having a similar thing and rather than use the BIOS I went into device manager and under each USB device properties/power management tab unchecked “allow this device to wake”. This turned my USBs off while the PC was off. You could try this as an alternate.

TTheAmazinGreat I was having a similar thing and rather than use the BIOS I went into device man...

Raven•8/2/24, 12:44 PM

In that case you’d also need to use the kill switch more often on the Rhino, wouldn’t you? Is there a downside to that?

RRaven In that case you’d also need to use the kill switch more often on the Rhino, wou...

TheAmazinGreatOP•8/2/24, 12:45 PM

I don’t think so, I believe it is the recommended method to turn off power when not in use.

TheAmazinGreatOP•8/2/24, 12:46 PM

Since the power supply isn’t switched, the E-stop is the only switch

H145Rotor-Sims•8/2/24, 4:14 PM

Hi Everyone, I have a Rhino and love it! I'm selling my Brunner CLS-E FFB Joystick for like 700USD plus shipping in USA only. I made a youtube of it showing that it works. Shoot me a DM if you are interested.

Eraseri•8/2/24, 6:03 PM

How can I get rid of this icon? Pressing the cross does nothing. It doesnt respond to anything I do. This ain't the first time this has happened.

Eraseri•8/2/24, 6:04 PM

Disconnecting Rhino doesnt help either

Eraseri•8/2/24, 6:07 PM

Killing edge process doesnt do anything

amadeus•8/2/24, 6:27 PM

there's a task called like Widgets in the task manager that killing it will remove it

amadeus•8/2/24, 6:28 PM

i made a post a while back how to permanently get rid of the edge version of this, since it doesn't seem to respect the advanced setting: https://canary.discord.com/channels/965234441511383080/965234441511383083/1259226124731416617

amadeus•8/2/24, 6:29 PM

(i've been running that fix for a few months now and it's never re-appeared, and i've had no ill side effects of killing that process from ever running)

EEraseri How can I get rid of this icon? Pressing the cross does nothing. It doesnt respo...

amadeus•8/2/24, 6:29 PM

just a reply bump in case ^

Stryker990•8/2/24, 6:42 PM

i booted up War Thunder again and thought i could do some sim flight but for some reason WT doesnt recognize any button inputs from my WinWing F-16EX grip any ideas how/if this can be fixed? (rhino+WW adapter+WW F-16EX Grip+Griptype is WinWing Adapter)

SStryker990 i booted up War Thunder again and thought i could do some sim flight but for som...

LeLv30_Superbus•8/2/24, 7:23 PM

Do the buttons show up in Windows?

LLeLv30_Superbus Do the buttons show up in Windows?

Stryker990•8/2/24, 7:25 PM

yes

Stryker990•8/2/24, 7:26 PM

WT does recognize the axes just no buttons so it seems to see the rhino but not anything through the adapter?

LeLv30_Superbus•8/2/24, 7:28 PM

What about here?

LLeLv30_Superbus What about here?

Stryker990•8/2/24, 7:30 PM

the rhino/grip are working normaly (at least in DCS and MSFS) just everything that isnt an axis isnt getting recognized

Number481•8/2/24, 7:30 PM

If you can see the buttons activating in configurator when you press them, there is no reason why WT wouldn't. Unless it has some sort of "too many usb devices" issue like IL2 does.

Stryker990•8/2/24, 7:31 PM

looks at all the MFD frames might be? but shouldnt axis also not work then?

Stryker990•8/2/24, 7:32 PM

hm mfd frames dont get any response also 1 sec ima disconnect everything except stick throttle rudder

LeLv30_Superbus•8/2/24, 7:33 PM

Too many controllers is the only thing that comes to my mind rn

Stryker990•8/2/24, 7:34 PM

okay yeah was to many controllers

Stryker990•8/2/24, 7:35 PM

man how can modern games have limitations like that >.<

Stryker990•8/2/24, 7:36 PM

the age of joysticks with like 2 buttons is long over

[

[OR] SerGeant•8/3/24, 12:16 AM

I have a huge problem with my newly built Pedals.
When both are plugged in, I have no spring force in the Stick in DCS.
When the pedals are unplugged and connected after DCS has started, it works fine.
I read some guys had the same problem, but there was not solution provided.
When starting DCS, I got „all effects reset“ in the debugging window, but the spring never comes alive in the aircraft.

[[OR] SerGeant I have a huge problem with my newly built Pedals. When both are plugged in, I h...

Number481•8/3/24, 12:35 AM

are you using vjoy? At least one person had issues exactly like you describe caused by VJoy. 🧰support

NNumber481 are you using vjoy? At least one person had issues exactly like you describe ca...

[

[OR] SerGeant•8/3/24, 12:40 AM

I did not install it manually. Maybe an application did it automatically. I think winwing is doing so. Will have a look tomorrow.

thedicecooler•8/3/24, 2:27 AM

I have spring and damper setup but the damping of the spring "bounce" at the center in the X axis is more pronounced than the Y. In other words, when you deflect and release in the Y, it's perfectly damped to spring back to center and stop. When released in X, it bounces in the center 5-6 times before coming to full rest. Any suggestions?

Tthedicecooler I have spring and damper setup but the damping of the spring "bounce" at the cen...

[

[OR] SerGeant•8/3/24, 7:33 AM

Hey there! I know this behavior. Have I the same way. It’s more present on higher gains.
Mine does not bounce so often but you see a difference to the x-axis.

RRaven In that case you’d also need to use the kill switch more often on the Rhino, wou...

Hiob•8/3/24, 8:19 AM

No, unless you have a switched power supply or outlet, you should turn off the Rhino with the e-stop.

NNumber481 are you using vjoy? At least one person had issues exactly like you describe ca...

[

[OR] SerGeant•8/3/24, 8:19 AM

so deinstalling vjoy did make no difference.
DCS is only giving out data to the pedals.

[[OR] SerGeant so deinstalling vjoy did make no difference. DCS is only giving out data to the ...

Hiob•8/3/24, 8:21 AM

Have you checked the IDs you gave to the devices? Are they different?

HHiob Have you checked the IDs you gave to the devices? Are they different?

[

[OR] SerGeant•8/3/24, 8:25 AM

Stick 2055, Pedals 2054

[

[OR] SerGeant•8/3/24, 12:55 PM

Ok, I got it working. Export script in DCS is causing the issue.
With only TelemFFB an SimShaker it works.
Seems like SimHaptic is causing a conflict.

witcohe•8/4/24, 2:35 AM

Just received my Rhino this week and love it so far. I am having an issue with getting the F-18 autopilot and the Rhino to play nice with each other. Any solutions? I've searched here but didn't find anything addressing it. Thanks.

witcohe•8/4/24, 2:36 AM

Sorry, forgot to mention it's for DCS
Update: Figured out the problem. Deselected spring force.

E69_Frajo•8/4/24, 9:53 AM

Hi guys. I am experiencing some issues with the estop switch. It seems to be loose and causes ffb disconnection now and then. Any suggestions to fix it? Are there any instructions to dismantle the Rhino to fix the e stop switch correctly?

FarFutureFox•8/5/24, 1:33 PM

The TelemFFB app is now always opening off right side of the screen (I can see a fast animation of the window zooming to the right). I’ve reinstalled it, but it doesn’t help. I’ve tried changing resolution but it doesn’t help. I can’t access its window for obvious reasons. Any ideas?

FFarFutureFox The TelemFFB app is now always opening off right side of the screen (I can see a...

Number481•8/5/24, 1:53 PM

For now, you can delete the saved window location key from the registry. Next version will prevent the window placing itself on a 2nd screen x,y if that screen is no longer connected. https://discord.com/channels/965234441511383080/1230919462144835674/1269309404474249366

Niko•8/6/24, 4:26 PM

Can someone explain to me the button mapping in the FFB Configurator? When I go to set keybinds in the simulator, some buttons aren't registering and some are registering the same button for different buttons (a 5 way hat will register the same button for two different directions)

Bambusa•8/6/24, 4:46 PM

I’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and the rhino. Any help would be greatly appreciated

BBambusa I’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and t...

LeLv30_Superbus•8/6/24, 4:53 PM

Hi! What seems to be the problem? Does MCGU show up in Windows game controllers? Do you use Loopback grip type in VPforce configurator? Is your blackbox blinking?

LeLv30_Superbus•8/6/24, 4:56 PM

What about Windows?

LeLv30_Superbus•8/6/24, 4:59 PM

Ok the grip should been seen in DCS too. What do you get in DCS? Rhino and MCGU or just one of them - or neither?

LeLv30_Superbus•8/6/24, 5:01 PM

I forgot to ask : does your Rhino+MCGU work in any other sim?

LeLv30_Superbus•8/6/24, 5:03 PM

So you get both Rhino and your grip in DCS now that you removed the file?

LeLv30_Superbus•8/6/24, 5:04 PM

Ok your VPforce configurator settings, please?

LeLv30_Superbus•8/6/24, 5:05 PM

Can you just Shift-Win-S the Settings and Effects pages please

LeLv30_Superbus•8/6/24, 5:06 PM

(Looks like F-14 rather than 18 config, but you should still feel a lot)

LeLv30_Superbus•8/6/24, 5:07 PM

I think you pasted Effects twice

I was having a similar thing and rather than use the BIOS I went into device manager and under each

Similar Threads