Okay I tried different things and got a strange USBlib Transfer error in between. Admin privileges d

Okay I tried different things and got a strange USBlib Transfer error in between. Admin privileges didn't help.
But a restart after a winupdate did. Now all works as I intended ! ... sometimes all I can do is wonder.

Major_FaultOP•8/8/24, 7:47 PM

... and again ...

MMajor_Fault Okay I tried different things and got a strange USBlib Transfer error in between...

LeLv30_Superbus•8/8/24, 9:35 PM

Possibly a WinUsb driver problem - try this: 🧰support

LeLv30_Superbus•8/8/24, 9:35 PM

LeLv30_Superbus•8/8/24, 9:37 PM

Or did Windows update do it for you already?

Limitless VR & Simrigs•8/9/24, 8:02 AM

Hey crew, all of a sudden my stick is contantly vibrating. I have read through others mention of this however nothing seems to fix it. Tried loading defaults, changing profiles. The only thing that seems to work is turning either the Master gain to 0 or the Periodic effects to 0. Any suggestions?

Limitless VR & Simrigs•8/9/24, 8:04 AM

[

[OR] SerGeant•8/9/24, 8:04 AM

Go to the debug window. There you can see if it is an effect or a bug.

Limitless VR & Simrigs•8/9/24, 8:05 AM

Not sure what to look for?

walmis•8/9/24, 8:05 AM

Could be a lingering effect, restarting DCS should fix it. Or you can reset all effects via TelemFFB menu

Limitless VR & Simrigs•8/9/24, 8:06 AM

Hmm ok, I tried a full power cycle of the PC a few times, would this not clear it?

Limitless VR & Simrigs•8/9/24, 8:06 AM

I was pushing some TFFB in DCS earlier.

[

[OR] SerGeant•8/9/24, 8:07 AM

You restart the pc and as soon as the rhino starts up, it is constantly vibrating?
You need to be more precise, when is it happening, what are the circumstances …

[[OR] SerGeant You restart the pc and as soon as the rhino starts up, it is constantly vibratin...

Limitless VR & Simrigs•8/9/24, 8:07 AM

That is exactly whats happening.

Limitless VR & Simrigs•8/9/24, 8:09 AM

Ill try firing up DCS, starting TFFB and resetting the effects to see if that has any affect.

[

[OR] SerGeant•8/9/24, 8:10 AM

It shouldn’t. If TFFB and DCS are not running there should be no effect on the rhino.

[

[OR] SerGeant•8/9/24, 8:10 AM

Especially after rebooting the system

[

[OR] SerGeant•8/9/24, 8:10 AM

But give it a try

LLimitless VR & Simrigs I was pushing some TFFB in DCS earlier.

LeLv30_Superbus•8/9/24, 8:19 AM

Do this in TelemFFB

[[OR] SerGeant Especially after rebooting the system

Limitless VR & Simrigs•8/9/24, 8:19 AM

Walmis was bang on, Yep, some how the effects had stuck and committed to the unit. Even after a reboot and zero software running it was vibrating constantly. Firing up DCS, and loading a module fixed it.

Limitless VR & Simrigs•8/9/24, 8:20 AM

Thanks all for the blazing fast assistance

[

[OR] SerGeant•8/9/24, 8:21 AM

Oh Crazy, never happened to me ever

Good to know!

Limitless VR & Simrigs•8/9/24, 8:21 AM

Yea I was pulling my hair out, totally strange however, this crew shines once again

Reed•8/9/24, 4:52 PM

What kind of curve in the vpforce software would allow a higher spring force in the center and taper off as you move the stick away from center. Say when trimmed flying helo with force trim enable in dcs or override. Or is this better accomplished with saturation

RReed What kind of curve in the vpforce software would allow a higher spring force in ...

smitty•8/9/24, 4:56 PM

Reed•8/9/24, 5:08 PM

Cool. Will this work in dcs when using the dcs ffb solution or once it’s set I can uncheck spring effect again and it’ll work with any module that spring?

RReed Cool. Will this work in dcs when using the dcs ffb solution or once it’s set I c...

142nd_Bama•8/9/24, 5:08 PM

You do not have to sticky it for the gain to work, I do this as well but with a steeper curve

Reed•8/9/24, 5:15 PM

Cool. What extension and grip are you using and what aircraft. I’m already using balance spring and adaptive recentering. However there is still some slop I want to tighten up completed how the real aircraft I’ve flown compares. Thanks.

1142nd_Bama You do not have to sticky it for the gain to work, I do this as well but with a ...

Reed•8/9/24, 5:17 PM

Gotta pic and thanks

RReed Cool. What extension and grip are you using and what aircraft. I’m already using...

142nd_Bama•8/9/24, 5:24 PM

I have the thrustmaster metal grip on a 200mm ext so about as heavy as you can get, lol

142nd_Bama•8/9/24, 5:25 PM

Took some tweaking and more so adapting, for helos though I’ve been overriding the trim and using a beeper trim also

Reed•8/9/24, 5:35 PM

Cool

Alkman•8/9/24, 11:15 PM

Can I set the Max Motor Current to 30A without causing damage to them ?

dgiatr•8/10/24, 9:14 AM

dgiatr•8/10/24, 9:19 AM

I'm new here
I am about to get vpforce rhino ffb so I want to ask the community if vkb gunfighter mk iv grip works well with vpforce rhino. I read somewhere that vkp grip cannot attached very well to rhino axle and it won't fasten strongly enough and it will suffer from some play during heavy stick forces.
Is that true? I will not use any extensions.
Thank you!

AndyHill•8/10/24, 11:16 AM

I have the older vkb connector, but I don't notice play or any difference between the adapter and the original vkb connector

AndyHill•8/10/24, 11:16 AM

I haven't looked that closely, though

Ddgiatr I'm new here I am about to get vpforce rhino ffb so I want to ask the community ...

LeLv30_Superbus•8/10/24, 12:38 PM

No play here either; I believe we both have Mk III though. I'm using extension(s).

AAndyHill I have the older vkb connector, but I don't notice play or any difference betwee...

dgiatr•8/10/24, 12:41 PM

Do you have any extension?
I will not..

dgiatr•8/10/24, 12:42 PM

Mk iv is it heavier than mk iii?

AndyHill•8/10/24, 12:50 PM

no extensions

AndyHill•8/10/24, 12:50 PM

well the adapter is kind of an extension by necessity

Ddgiatr Mk iv is it heavier than mk iii?

Col. Sanders•8/10/24, 2:38 PM

No you will be good with Mk IV. The Revision C connection is really nice. The Rhino adapter Walmis makes is high quality. Just make sure that you don't pinch the cable when installing.

JIGGAwest•8/10/24, 5:00 PM

Ok, I am trying to set the gain map for spring force, but everytime I do, the stick goes wild and the motors shut down. requiring a power cycle to bring them back online. any ideas here?

JJIGGAwest Ok, I am trying to set the gain map for spring force, but everytime I do, the st...

LeLv30_Superbus•8/10/24, 10:00 PM

Not sure why it is unexpected. Your inertia slider is @ 100% that's kind of extreme

LeLv30_Superbus•8/10/24, 10:00 PM

and friction as well

JJIGGAwest Ok, I am trying to set the gain map for spring force, but everytime I do, the st...

Number481•8/10/24, 10:01 PM

Your gain curve (in the video) is too extreme. That steep of a rise from center will lead to instability every time. BTW, you can hit the “reset motors” on the debug tab to recover from a motor fault without having to power cycle the Rhino.

LLeLv30_Superbus Not sure *why* it is unexpected. Your inertia slider is @ 100% that's kind of ex...

JIGGAwest•8/10/24, 10:18 PM

I believe walmis set this for me at some point. I was having some trouble in the past... Where should all of this be set?

JJIGGAwest I believe walmis set this for me at some point. I was having some trouble in the...

Number481•8/10/24, 10:33 PM

The sliders dont really matter unless:
- you enable the corresponding effect in the effects tab (which you don’t)
- a game starts one of those effects (DCS does not use any of those effects)
- you enable the friction/damper/inertia overrides in TelemFFB.

NNumber481 The sliders dont really matter unless: - you enable the corresponding effect in ...

JIGGAwest•8/11/24, 2:34 AM

I can't put any amount of gain in this spring mapping. it goes bonkers regardless of the increase.

OZ67•8/11/24, 2:38 AM

Hello , the Joystick VPforce app says "Force Trim Enabled but buttons not configured , using the hp160 helicopter and the hardware trim and msfs trim seem ok ? but that ! mark on msfs symbol and the error message What buttons arn't configured? Cheers. SOLVED : The buttons config in telemffb , not showing up when VP was also opened. closed VP software then was able to see and configure Trim reset and trim release buttons.

Okay I tried different things and got a strange USBlib Transfer error in between. Admin privileges d

Similar Threads