VPforce Controls•17mo ago

How does this option in the F4 special tab interact with the Rhino?

RRoboGeoff How does this option in the F4 special tab interact with the Rhino?

Anthony•8/12/24, 10:45 PM

Default ffb strength

RRoboGeoff How does this option in the F4 special tab interact with the Rhino?

Limitless VR & Simrigs•8/13/24, 6:48 AM

Mate those settings are a game changer, One of the crew on here suggested settings of 280 roll and 190 pitch. The default of 100% for both in DCS is simply not enough force going to the Rhino. The F4 always felt to slippery, now with the changed percentages its a dream and with heaps of force feedback. Those percentages can go as high as 500% each.

Anthony•8/13/24, 9:32 AM

Nah, it’s fine as is

Anthony•8/13/24, 9:33 AM

When you add dampener effects in the Rhino software, it makes it a dream

Anthony•8/13/24, 9:34 AM

I think the F-4 simply demonstrates how poor FFB effects are implemented by DCS since they only account for “spring” and nothing else

Anthony•8/13/24, 9:35 AM

Other modules just don’t suffer from it as much

Anthony•8/13/24, 9:36 AM

Upping the FFB gain just creates
unrealistic feedback which, while it can work, isn’t how the stick would feel in the real plane

Anthony•8/13/24, 9:37 AM

Just add 30-40% “dampener” instead and you’ll likely have replicated a decent feel of how the bob and bellows feedback worked in the real plane

Anthony•8/13/24, 9:38 AM

The stick definitely stops sliding around

(

(41F) RAFAIR Dave H•8/13/24, 1:14 PM

Is force trim only for helis or can I use it in say fa-18 to push to correct attitude / speed and then push button To trim to that position like I could do real life in some gliders I flew with a spring type trim system button reset spring center

((41F) RAFAIR Dave H Is force trim only for helis or can I use it in say fa-18 to push to correct att...

PiNKSH!T•8/13/24, 2:01 PM

So depends on personal taste. Irl the f-18 is fly-by-wire so there's no trim like that but if you'd like to you can set it up in the config or the telemffb app to behave that way.

ameister•8/13/24, 4:17 PM

Hi - Newbie here. I am trying to set up my new Rhino for helicopter force trim but cannot seem to get my stick to center to the new position once I force trim. My settings and button bindings of my attempt to force trim are attached. Would anyone be so kind as to explain what I am doing wrong here? I was trying to upload a short video but it would not let me b/c of size. Essentially I was trying to demonstrate is that I can move my stick while holding the force trim button I have assigned and the center circle does not move away from the center to the point where I release the force trim.

Aameister Hi - Newbie here. I am trying to set up my new Rhino for helicopter force trim ...

Number481•8/13/24, 4:25 PM

Where have you bound the button? Do you mean the binding in DCS or the binding in configurator? You currently have "sticky" enabled on the spring setting. This will override the spring effect that is generated by DCS native FFB implementation.

You have button 45 bound in configurator as the hardware force trim. That button should allow you to reposition the center of the spring force. Because you have "sticky" enabled, the spring effect and button binding from DCS is not being used.

Suggestion: Disable "sticky". Bind your trim button in DCS.

Dracks•8/13/24, 4:43 PM

And don't forget to read the (really helpful) manual ! The part about DCS and helicopters is a good read! In principle, it's a good way to get started with the Rhino (and take TelemFFB too, which will help you fine-tune the settings).

NNumber481 Where have you bound the button? Do you mean the binding in DCS or the binding ...

ameister•8/13/24, 5:02 PM

I did as you suggested and everything works great. What a difference this makes, wow...Thanks very much for your help

DDracks And don't forget to read the (really helpful) manual ! The part about DCS and he...

ameister•8/13/24, 5:06 PM

Yes, I've been reading it but apparently I missed the points where you had to set the trim button in both DCS and the config tool. I interpreted it so that I would only have to assign the buttons in the config tool and NOT also assign them in DCS (so, I had previously deleted my assigned buttons in DCS). I know better now...

Aameister Yes, I've been reading it but apparently I missed the points where you had to se...

Number481•8/13/24, 5:07 PM

You don't actually need anything bound in configurator. That button won't do anything unless you either have the "sticky" enabled, or if you have no game running and the Rhino is using its own effect generated by the configurator.

Aameister Yes, I've been reading it but apparently I missed the points where you had to se...

Dracks•8/13/24, 5:47 PM

Don't worry, we all jumped on the Rhino and quickly read/understood

.

Welcome to the club!

Touch_Of_Legend•8/13/24, 6:00 PM

Yeah she’s a special beast

VPforceBot•8/15/24, 6:12 AM

:package:

RHINO #0665 Has Shipped!

Virus•8/15/24, 9:38 AM

Hi, I am considering on getting a VKB F-14 grip, but I don't have any VKB hardware, I know I need the adapter, and the black box, but on the VKB EU website (flightsimcontrol.com) I am able to find only the older MkI/MKII blackbox...Or If i buy the grip they include the blackbox also?

Haaank•8/15/24, 11:18 AM

Idk about the marks but the black box isn’t included with the grip afaik.

Haaank•8/15/24, 11:19 AM

Just an fyi, ppl really (and I mean really really) love the mcgu grip.

VVirus Hi, I am considering on getting a VKB F-14 grip, but I don't have any VKB hardwa...

TheBigBobo•8/15/24, 11:24 AM

Could you not just buy the virpil one instead?

Ithergames•8/15/24, 11:41 AM

Am I really this dumb? In the VP config software; I need to set the sliders for the effects I want (the % of max) and then I setup the effects tab? This is what default is if TelemFFB isn't running right? Say in DCS those effects are overriden by what TelemFFB gives me in the module? It's not clicking for me for some reason--maybe I need more coffee or someone to hit me with a shovel.

Haaank•8/15/24, 11:50 AM

So telemFFB either enhances already present ffb in game, or substitutes it if theres no native ffb support.

Haaank•8/15/24, 11:50 AM

IL-2 has native ffb support, in dcs it depends per module.

Haaank•8/15/24, 11:50 AM

F-14 for example has good native ffb support, so telemffb is just for certain extra effects.

IIthergames Am I really this dumb? In the VP config software; I need to set the sliders for ...

Number481•8/15/24, 12:07 PM

To expand on the above,
- Settings Tab: These sliders adjust the max capability for the intensity/strength of any of the effect types, regardless of if its generated by the configurator app or by a game/telemffb
- Effects Tab: The various effects (spring/damper/inertia/friction), when enabled, will start said effect on the joystick when it is "idle" (not receiving any overlapping FFB effect from a game/TelemFFB).
- As soon as a game/TelemFFB start an overlapping effect, it will take precedence over what is in configurator UNLESS you have the sticky checkbox enabled.
- Other things on the effects page like Gain Maps, Endstops, Balance Spring, etc are persistent. It is only the previously mentioned effects and its strength settings that will be overridden by a game/telemffb.

VVirus Hi, I am considering on getting a VKB F-14 grip, but I don't have any VKB hardwa...

Col. Sanders•8/15/24, 1:41 PM

Email VKB and they can get it sorted out.

NNumber481 To expand on the above, - Settings Tab: These sliders adjust the max capability...

Ithergames•8/15/24, 2:29 PM

Ok great. That's making sense now. TY!!

VVirus Hi, I am considering on getting a VKB F-14 grip, but I don't have any VKB hardwa...

LeLv30_Superbus•8/15/24, 3:22 PM

Check this when you order, VKB customer service is always very helpful.

Col. Sanders•8/15/24, 3:29 PM

I don't think that is correct. Mk IV I am pretty sure only used black box 3 which is also compatible with Rev b connectors and rec C.

Original message was deleted

Col. Sanders•8/15/24, 3:29 PM

Not correct. I have vkb grips and no gunfighter base.

Lt_Dan•8/15/24, 3:51 PM

Are most people turning their Rhinos right up ? Like 100% on the master gain is that ok ?

Lt_Dan•8/15/24, 3:52 PM

With the wheel on the front

amadeus•8/15/24, 3:57 PM

That’s how I run it 99% of the time

amadeus•8/15/24, 3:58 PM

I only turn it down if I feel like the spring is too strong in game and don’t want/can’t pause to adjust

Lt_Dan•8/15/24, 4:01 PM

Yeah I’ve been doing that for helicopters just knocking it down a little

I swear this thing gets better every time I use it

having it at 100% for the f18 made AAR like it was on rails so much easier now

Greekbull•8/15/24, 8:22 PM

Pretty pumped...went from 48 left to go to 1 left, invoice received and paid today. Looks like I'll have the Rhino soon!

RoboGeoffOP•8/15/24, 8:48 PM

I've been flying the F-14 more again just because it feels so much better now with the Rhino

amadeus•8/15/24, 8:50 PM

yeah, F-14 feels pretty great out of the box

GGreekbull Pretty pumped...went from 48 left to go to 1 left, invoice received and paid tod...

DARRYL•8/15/24, 9:33 PM

Just curious. How many months did it take for yours?

DDARRYL Just curious. How many months did it take for yours?

Greekbull•8/15/24, 10:23 PM

My original preorder was on 1/25

Greekbull•8/15/24, 10:24 PM

but I shot up almost 50 spots today so I'm sure there is a decent amount of cancelations on the free preorders as they come up in the que...

buzzbomb•8/15/24, 11:50 PM

my preorder was 2/12 and still have 112 to go

LLt_Dan Yeah I’ve been doing that for helicopters just knocking it down a little 👍🏻I s...

Ithergames•8/16/24, 12:33 AM

Mind sharing the sliders in VP software? I fly the 18 too and I'm interested in others settings.

IIthergames Mind sharing the sliders in VP software? I fly the 18 too and I'm interested in ...

Lt_Dan•8/16/24, 6:19 AM

Leave it all at default select spring and adaptive re Center in the settings menu.Then select master gain for port 1 and turn the dial up to 100 on the top of the unit.
When flying helicopters just back off the dial a bit to your liking

VPforceBot•8/16/24, 8:07 AM

:package:

RHINO #0667 Has Shipped!

VPforceBot•8/16/24, 8:07 AM

:package:

RHINO #0668 Has Shipped!

How does this option in the F4 special tab interact with the Rhino?

Similar Threads

Similar Threads

Similar Threads