@dannymate Ok for some reason I don't think it ever "makes" the container? Because if I then try to

@dannymate Ok for some reason I don't think it ever "makes" the container? Because if I then try to use "start" it just says no winapps container exists

KKyle Gospo Would also be nice if these issues were consistent

Aru•8/14/24, 1:04 AM

yep, i get that it's mostly outside of your control. and thankfully rpm-ostree makes it trivially easy to rollback
i'm just not as gung-ho about updating as I was before

VValerie @dannymate Ok for some reason I don't think it ever "makes" the container? Becau...

ValerieOP•8/14/24, 1:04 AM

Oh NOW it works

ValerieOP•8/14/24, 1:04 AM

I'm... confused

dannymate•8/14/24, 1:07 AM

Podman can be confusing. I have a 2am hard cut off for podman related problems so I'm off to bed.

dannymate•8/14/24, 1:08 AM

I'll check up in the morning. Good luck!

Ddannymate Podman can be confusing. I have a 2am hard cut off for podman related problems s...

ValerieOP•8/14/24, 1:08 AM

Fair, same time here. I'm at work tomorrow but will take another crack at it after.

KKyle Gospo Like I know that artifacting is a bug, but I don't have it on any hardware

matt_schwartz•8/14/24, 1:13 AM

I’ve still not seen this on any hardware either, steamos or Fedora. I really would have expected to run into it on at least one device by now.

matt_schwartz•8/14/24, 1:14 AM

even tried docking my Deck and trying a bunch of desktop/game mode transitions

LeftyPencil•8/14/24, 1:25 AM

Can the low battery warning be adjusted from 10%?

Khovet•8/14/24, 1:40 AM

Hi people

Khovet•8/14/24, 1:41 AM

Someone here, have try to install android studio on bazzite? If you have, did you find some problem installing?

Ttryhardsoccermomswag someone took a bite out of that window

tulip•8/14/24, 2:11 AM

sorry it was me

HHoodieWoody Hey I’m only getting 115W of my GPUs 140W max TDP, is there a trick to getting i...

jcnix•8/14/24, 2:29 AM

I think what you might be seeing is the difference between GPU power and total board power. The 140w rating from the spec sheet may be the total power draw of the card including memory, fans, and everything else. 115w may just the gpu die by itself.

Jjcnix I think what you might be seeing is the difference between GPU power and total b...

HoodieWoody•8/14/24, 2:32 AM

I appreciate the response. It’s 115W base TDP with a 25W boost, in windows the GPU draws 140 no problem. It’s a Linux thing I gotta figure out. I’ve read before that TDP boosts can be weird in Linux

HoodieWoody•8/14/24, 2:33 AM

It’s a 140W RTX 3070

jcnix•8/14/24, 2:36 AM

Oh is this a mobile chip? I'm not as familiar with how those work power wise

Reverie•8/14/24, 2:41 AM

Hi y'all! How can I format an internal SSD? I installed bazzite on one of my internal SSDs but I can't find the other

Kadin Buckton•8/14/24, 3:11 AM

Messed around yesterday and managed to install and get Niri working via layering, had to install xwayland-satellite for steam to work and there was some funky stuff which I believe is due to the general Nvidia driver wayland support. Had some issues with plasmashell loading alongside niri when selecting it in SDDM, and then had to recreate my user because it completely borked logging into the plasma session, but it was a fun couple hours of fiddling. May try my hand at making a Niri fork if I can manage to wrap my head around all of the cosign and build process stuff

Kadin Buckton•8/14/24, 3:12 AM

Apparently building an entire distribution via containers is trickier than building an application, who would have thought

Kadin Buckton•8/14/24, 3:13 AM

@Sou Suzumi Did you happen to want a tiling WM enough to try it?

RReverie Hi y'all! How can I format an internal SSD? I installed bazzite on one of my int...

Kadin Buckton•8/14/24, 3:34 AM

Any disk manager tool should be able to do it, gparted comes to mind

KKadin Buckton Any disk manager tool should be able to do it, gparted comes to mind

Reverie•8/14/24, 3:48 AM

Thank you!!

Jjcnix Oh is this a mobile chip? I'm not as familiar with how those work power wise

HoodieWoody•8/14/24, 4:12 AM

Yess it’s the laptop variant for the 3070

iTolick•8/14/24, 4:38 AM

Hello everyone, I'm new to Linux and I don't understand a lot of things.Installed Bazzite according to guides from the Internet on my OneXPlayer 2 pro and I want to understand, is it possible to somehow fix FPS in games, for example 40 FPS, 45, 50?I only have 60,30,15 FPS.Maybe this question was asked somewhere, but unfortunately I didn't find anything, Please help with advice if there is any, if it is possible to do something)

Thanks in advance for any response.

IiTolick Hello everyone, I'm new to Linux and I don't understand a lot of things.Installe...

Kyle Gospo•8/14/24, 4:39 AM

Your framerate cap has to be divisible by your display refreshrate

Kyle Gospo•8/14/24, 4:39 AM

so, 60, 30, and 15 are your only options

Kyle Gospo•8/14/24, 4:39 AM

if it wasn't, you'd get stutter due to incorrect timing

Kyle Gospo•8/14/24, 4:39 AM

perpetually

KKyle Gospo so, 60, 30, and 15 are your only options

iTolick•8/14/24, 4:40 AM

And this is not possible to change?

IiTolick And this is not possible to change?

Kyle Gospo•8/14/24, 4:40 AM

you can force it with launch options if you want your handheld to run badly

Kyle Gospo•8/14/24, 4:40 AM

you don't have a display capable of those caps

KKyle Gospo you don't have a display capable of those caps

iTolick•8/14/24, 4:41 AM

But I would like to try:-) How can I do this, please tell me?

IiTolick But I would like to try:-) How can I do this, please tell me?☺️

HoodieWoody•8/14/24, 4:45 AM

Just don’t bro lol The frame pacing will be

HHoodieWoody Just don’t bro lol The frame pacing will be 🤮

iTolick•8/14/24, 4:46 AM

Got it, thanks for the prompt response))

iTolick•8/14/24, 4:47 AM

Last question, screen resolution 2560-1440 on the desktop, when changing to any other resolution, the screen becomes black for 10 seconds, then returns to default.Is it possible to change this somehow?

IiTolick Last question, screen resolution 2560-1440 on the desktop, when changing to any ...

Kyle Gospo•8/14/24, 4:47 AM

just like your display is only capable of 60hz, it's only capatable of the native resolution. The legion go is the same

Kyle Gospo•8/14/24, 4:48 AM

gamescope will let you lower game resolution and scale it up to native

Kyle Gospo•8/14/24, 4:48 AM

either via integer scaling or FSR

HoodieWoody•8/14/24, 4:48 AM

For games to look smooth you gotta have even devisions of the displays refresh rate. 30fps/60hz, 30fps/90hz and so on. If you have something uneven you’ll have frames being displayed either too many times or not even times. Not a great explanation but the jist of it

Kyle Gospo•8/14/24, 4:48 AM

if it's not too late to return this thing you might consider it, that's a woefully terrible display for the $1k+ asking price on these things

Kyle Gospo•8/14/24, 4:49 AM

Legion Go is the same resolution at 144hz, so you have a lot more framerate cap options

HoodieWoody•8/14/24, 4:50 AM

Kyle I have an interesting bug that I posted in the help channel when you have time to check it out

nilmethod•8/14/24, 4:53 AM

how can i upgrade an rpm i installed manually? i installed protonmail with rpm-ostree from an rpm that they provided but when i try to upgrade, it fails

nilmethod•8/14/24, 4:56 AM

install tells me it can't install both versions, upgrade says no upgrade available

nilmethod•8/14/24, 5:14 AM

for what it's worth i just ran rpm-ostree uninstall and then install with the new rpm. seems to have done the trick

KKyle Gospo if it's not too late to return this thing you might consider it, that's a woeful...

iTolick•8/14/24, 5:26 AM

I got it for $600 and I think I really like it)

IiTolick Last question, screen resolution 2560-1440 on the desktop, when changing to any ...

iTolick•8/14/24, 5:29 AM

Can someone help with this?

IiTolick Can someone help with this?

Kyle Gospo•8/14/24, 5:29 AM

answer already given

Kyle Gospo•8/14/24, 5:30 AM

🎮bazzite

KKyle Gospo answer already given

iTolick•8/14/24, 5:36 AM

And it will always be like this on Linux, won't it be possible to change it in the future?)

@dannymate Ok for some reason I don't think it ever "makes" the container? Because if I then try to

Similar Threads

Similar Threads

Similar Threads