i was thinking maybe card is just throttling because fans are not spinning fast enough?
i was thinking maybe card is just throttling because fans are not spinning fast enough?
Klet's plug a display into the GPU before we go down this route
Mok. will do it right now. will be back in 10-15 minutes
ZProbably syncthing
KAlso when you have it hooked up, open terminal and do
boltctl list and let me know the output.
CResilio sync is an alternative to sync thing that I prefer, there are also just scripts to install it
Zwhats the difference? i personaly have used syncthing for syncing emulator saves and things like that never tried syncing my whole home folder (thinking about it that might be a bad idea even if I am using the same DE and distro on both systems...)
M● Razer Core X
├─ type: peripheral
├─ name: Core X
├─ vendor: Razer
├─ uuid: c8010000-0070-6718-2397-b1840622c801
├─ generation: Thunderbolt 3
├─ status: authorized
│ ├─ domain: 02343804-c12e-b039-ffff-ffffffffffff
│ ├─ rx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ ├─ tx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ └─ authflags: none
├─ authorized: Wed Aug 14 21:18:09 2024
├─ connected: Wed Aug 14 21:18:09 2024
└─ stored: Wed Aug 14 16:53:25 2024
├─ policy: iommu
└─ key: no
├─ type: peripheral
├─ name: Core X
├─ vendor: Razer
├─ uuid: c8010000-0070-6718-2397-b1840622c801
├─ generation: Thunderbolt 3
├─ status: authorized
│ ├─ domain: 02343804-c12e-b039-ffff-ffffffffffff
│ ├─ rx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ ├─ tx speed: 40 Gb/s = 2 lanes * 20 Gb/s
│ └─ authflags: none
├─ authorized: Wed Aug 14 21:18:09 2024
├─ connected: Wed Aug 14 21:18:09 2024
└─ stored: Wed Aug 14 16:53:25 2024
├─ policy: iommu
└─ key: no
CResilio sync has selective sync so you can choose what each client downloads. I also find it simpler than sync thing but they are pretty comparable
KOkay yeah should be working.
Mstarting a game from desktop mode
K
Zoh that achtually sounds cool the selective sync i mean
CI use the selective sync to pull specific comics from my library to a tablet for reading and it works well
LOh nice. I use the komga docker container to host a comic book server and connect to it remotely via tailscale.
K@MrHorda so any luck?
Msorry. all hanged. blck screens and etc
Mso it is the same story
Mlegion go --> tb3/4 cable --> razer core x + rx 7900gre --> external display over DP cable. no luck terrible performance.
Eis there acceleration applied to a controller when you first plug it in?
Elike the stick/pad
Mi really think fans are not spinning when they should
Mdeck@LegionGO:~$ switcherooctl
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@LegionGO:~$
Device: 0
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Phoenix1
Default: yes
Discrete: no
Environment: DRI_PRIME=pci-0000_c2_00_0
Device: 1
Name: Advanced Micro Devices, Inc. [AMD®/ATI] Navi 31 [Radeon RX 7900 XT/7900 XTX/7900M] (RX 7900 GRE [XFX])
Default: no
Discrete: yes
Environment: DRI_PRIME=pci-0000_67_00_0
deck@LegionGO:~$
Mthe card or driver is not playing nice
Amy legion go is artifacting on my external monitor
A
A
Anever update never reboot gang
KI feel seen lmao. 91 days on the laptop 
Ai also have a huge memory leak now
KHad it whirring and creaking last time on about 170 days. It ran out of paging space or just confused itself and everything crashed slowly in sequence over half an hour.
CI'm still having some minor audio issues on my Rog Ally X running Bazzite when outputting over HDMI. Small audio blips / drop outs at infrequent intervals. Not crackling, just cutouts of around half a second or less. These don't seem to be tied to load as they can affect the home screen in game mode when GPU and CPU are both pretty chilled.
I've isolated the issue (I think) to the interface between the Ally and my main TV. On two additional screens I don't seem to have any issues - both of these are 1080p screens whereas my main screen that presents problems is 4k. Might be a total dead-end, but I'm trying to methodically work through all variables here.
In both game mode and KDE I cap the external display at 1080p, but I'm wondering if there's anything else I can do to prevent the Ally being able to output higher at all.
I've isolated the issue (I think) to the interface between the Ally and my main TV. On two additional screens I don't seem to have any issues - both of these are 1080p screens whereas my main screen that presents problems is 4k. Might be a total dead-end, but I'm trying to methodically work through all variables here.
In both game mode and KDE I cap the external display at 1080p, but I'm wondering if there's anything else I can do to prevent the Ally being able to output higher at all.
KI am fairly sure there's a memory leak issue on desktop, I get similar issues after long enough, made worse if I run a bunch of games
Kto be clear, I believe antheas is on arch rather than bazzite
Kblasphemy.
KThough I've also never gone 8 days without rebooting my Go.
Mmaybe stupid question. Does bazzite have opensource driver?Is there a way to isntall those linux drivers that are on AMD web ?
Kwe ship the open source AMD driver with RADV
KWe're all using the same driver. ^^
Kand offer zero support for the closed source AMDVLK driver
Kit's slower than RADV in nearly every workload
Ki was also not talking of bazzite
Mgot it
Kthere is nothing you can do to install it here
Kjust for further clarity
KAMDVLK wouldn't help anything anyhow
Ahid the rest of the neofetch
Ato not be called out lmao
KSHAME, SHAME
Kour fastfetch theme is hella different
Konly reason I know
